Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Aplex Manuals
  4. Touch Panel
  5. AUHMI-8 B Series
  6. User manual

Aplex AUHMI-8 B Series User Manual

10.1”, 15.6”, and 21.5” intel elkhart lake fanless industrial compact size panel pc
Hide thumbs

Advertisement

Quick Links

Download this manual
AUHMI-8XXB Series
10.1", 15.6", and 21.5" Intel Elkhart Lake
Fanless Industrial Compact Size Panel PC
User Manual
Release Date
Revision
June 2024
V1.0
®2024 Aplex Technology, Inc.
All Rights Reserved.
Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: 886-2-82262881 Fax: 886-2-82262883
URL:
https://www.aplex.com/

Advertisement

loading
Need help?

Need help?

Do you have a question about the AUHMI-8 B Series and is the answer not in the manual?

Questions and answers

Related Manuals for Aplex AUHMI-8 B Series

Summary of Contents for Aplex AUHMI-8 B Series

  • Page 1 Fanless Industrial Compact Size Panel PC User Manual Release Date Revision June 2024 V1.0 ®2024 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan Tel: 886-2-82262881 Fax: 886-2-82262883 URL: https://www.aplex.com/...
  • Page 2 Revision History Reversion Date Description 2024/6/21 Initiation AUHMI-8XXB Series User Manual...
  • Page 3 Disclaimer This information in this document is subject to change without notice. In no event shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or consequential, arising from either the use or misuse of information in this document or in any related materials.
  • Page 4 Safety Precautions Follow the messages below to prevent your systems from damage: ◆ Avoid your system from static electricity on all occasions. ◆ Prevent electric shock. Don‘t touch any components of this card when the card is power-on. Always disconnect power when the system is not in use. ◆...
  • Page 5 Table of Contents Revision History............................1 Warning!_______________________________________ ................ 2 Safety Precautions ..........................3 Chapter 1 System Product ........................ 6 Features ..............................6 Specifications ............................6 Standard LCD ............................8 High Brightness LCD ..........................8 Mechanical ............................. 9 Dimensions ............................. 9 Brief Description of AUHMI-8XXB Series .....................
  • Page 6 LAN Driver ............................104 Touch Screen Installation ........................107 List of Figures AUHMI-810B ..............................9 IGURE IMENSIONS OF AUHMI-816B ..............................10 IGURE IMENSIONS OF AUHMI-821B ..............................10 IGURE IMENSIONS OF AUHMI-810BP(H) ............................11 IGURE RONT IEW OF AUHMI-810BP(H)............................. 11 IGURE IEW OF AUHMI-816BP(H) ............................
  • Page 7 Chapter 1 System Product 1.1 Features ⚫ Intel Elkhart lake Fanless HMI Panel PC ⚫ Flat front panel touch screen ⚫ Fanless design ⚫ Front Panel IP66 ⚫ Gap free sealing and Slim Front Frame architecture at front bezel ⚫ 9~36V DC wide-ranging power input 1.2 Specifications AUHMI-9XXC System...
  • Page 8 ◆ Smart Battery (turbo off in bios; new PCBA PB-434 must be installed with smart battery, keep the system working at least 30 minutes, depend on different size) ◆ 1 x 2W Speaker ◆ Auto Dimming (Exclusive LED indicator) ◆ GPIO (4xDI, 4xDO) ◆...
  • Page 9 Storage Temperature -30~70°C Humidity 10 to 95% @ 40°C, non-condensing Certification CE / FCC Class B, RoHS/REACH Compliant 1.3 Standard LCD AUHMI-810BP AUHMI-816BP AUHMI-821BP Display Type 10.1” 15.6” 21.5” LED Backlight LED Backlight LED Backlight Max. Resolution 1280 x 800 1366 x 768 1920 x 1080 1920 x 1080...
  • Page 10 1.5 Mechanical AUHMI-810BP AUHMI-816BP AUHMI-821BP Mounting VESA 100 x 100; VESA 100 x 100; VESA 100 x 100; Panel Mount Panel Mount Panel Mount 269x189x51 405x256x59 541x330x59 Dimensions(mm) Net Weight(Kg) Power Consumption 1.6 Dimensions Figure 1 Dimensions of AUHMI-810B AUHMI-8XXB Series User Manual...
  • Page 11 Figure 2 Dimensions of AUHMI-816B Figure 3 Dimensions of AUHMI-821B AUHMI-8XXB Series User Manual...
  • Page 12 1.7 Brief Description of AUHMI-8XXB Series There are 10.1” , 15.6”, 21.5” Industrial Compact Size Panel PC in AUHMI-8XXB series, which comes with flat front panel touch screen and fanless design. It is powered by Intel® Celeron® J6412 CPU Processors with SO-DIMM DDR4 slot, up to 32GB 3200 MHz.
  • Page 13 Figure 6 Front View of AUHMI-816BP(H) Figure 7 Rear View of AUHMI-816BP(H) AUHMI-8XXB Series User Manual...
  • Page 14 Figure 8 Front View of AUHMI-821BP(H) Figure 9 Rear View of AUHMI-821BP(H) AUHMI-8XXB Series User Manual...
  • Page 15 1.8 VESA Mounting 1.8.1. 10.1” The AUHMI- is designed to be VESA mounted as shown in Picture. Just carefully place the unit 810B through the hole and tighten the given 4 x M4x8 screws from the rear to secure the mounting. Figure 10 AUHMI-810B VESA Mounting 1.8.2.
  • Page 16 1.9 Panel Mounting 1.9.1. 10.1” Step1: Embed the main AUHMI-810B machine into the panel frame. Step2: Insert the latch into the specific hole on AUHMI-810B. Step3: Fix the latch with screw. Figure 12 AUHMI-810B Panel Mounting 1.9.2. 15.6” and 21.5” Step1: Embed the main AUHMI-816B/821B machine into the panel frame.
  • Page 17 Step2: Insert the latch into the specific hole on AUHMI-816B/821B.(The mounting kits are different from AUHMI-810B) Step3: Fix the latch with screw. Figure 13 AUHMI-816B/AUHMI-821B Panel Mounting AUHMI-8XXB Series User Manual...
  • Page 18 1.10 Cable Cover Due to mechanical limits, cable cover only fits 15.6” and 21.5” model. Turn the two small brackets into two sides to separate from 15.6” and 21.5” printing. Step1: Insert the cover via the two brackets onto machine. Step2: Fix the cover with 2x M3x6 screws.
  • Page 19 1.11 Battery Kit Installation Step1: Insert the battery kit to the MB box kit and screw it with 4pcs M3x6 screws. Step2: Connect the battery cable to the MB connector. AUHMI-8XXB Series User Manual...
  • Page 20 1.12 MB Box kit attaches to the Front Kit This part fits for all 10.1”, 15.6” and 21.5” models. Step1: Insert the MB Box Kit to the Front Kit. Step2: Use 2x M3x6 Pan-head screw to fix MB Box kit with Front kit at both left side and right side. Figure 15 AUHMI-810B MB Box kit attaches to Front Kit Figure 16 AUHMI-816B/821B MB Box kit attaches to Front Kit AUHMI-8XXB Series User Manual...
  • Page 21 1.13 Warning for separating AUHMI BOX PC Step1: Recognize BOX PC is the blue one shown as picture above. Step2: Separate the BOX PC from Front Kit slightly. Step3: Separate successfully. Note: It may cause the M.2 space copper pillar damage if separate roughly. Figure 17 AUHMI-8XXB BOX PC separation warnings AUHMI-8XXB Series User Manual...
  • Page 22 Chapter 2 Hardware SBC-7131 is a industrial motherboard developed on the basis of Intel Elkhart Lake,which provides abundant peripheral interfaces to meet the needs of different customers. Also, it features dual RJ45 connectors, 6-COM ports and one M.2 M-Key configuration, one DP/HDMI combo connector, one LVDS interface.
  • Page 23 pin9 RI(default)/5V/12V, select via JP1. (DB9, COM1) 1 x RS-232 via pitch 2.0mm 2x5pin header, pin9 RI(default)/5V/12V, select via JP2 (COM2) 8-bit digital I/O by Pin header (GPIO1) GPIO 4-bit digital Input 4-bit digital Output Audio Support Audio via Realtek ALC888S-VD2 HD audio codec 1x Line out via 3.5mm audio jack Support 2x2W speakers (SPKR1/SPKL1) Support Line-in,Line-out,MIC by 2x6-pin header...
  • Page 24 CE/FCC class B RoHS2.0 2.2 Board Dimensions Dimensions: 155 x 125 (units :mm) AUHMI-8XXB Series User Manual...
  • Page 25 Jumpers and Connectors Location Board Top SATA1 DEBUG1 SATA_P1 CPU1 BAT1 COM2 JP2 USB2 F_AUDIO1 AUHMI-8XXB Series User Manual...
  • Page 26 Board Bottom GPIO1 SIM1 M2_E1 FAN1 M2_B1 M2-B1 DDR4_1 SPKR1 SPKL1 External IO USB3_1 COM1 DC_IN1 TB-616 PCIX4 AUHMI-8XXB Series User Manual...
  • Page 27 Jumpers Setting and Connectors 1. CPU1: (FCBGA1493) Onboard Intel Elkhart Lake SoC Model Number Cores/ Remarks Threads Default SBC-7131-J6412 J6412 2.0~2.6GHz 4 / 4 Option SBC-7131-X6425E X6425E 2.0~3.0GHz 4 / 4 2. DDR4_1: (SO-DIMM 260Pin slot) DDR4 memory socket, the socket is located at the top of the board and supports 260Pin 1.2V DDR4 SO-DIMM memory module up to 32GB.
  • Page 28 CMOS clear switch, CMOS clear operation will permanently reset old BIOS settings to factory defaults. Procedures of CMOS clear: a) Turn off the system and unplug the power cord from the power outlet. b) To clear the CMOS settings, close Pin5-6 for 1 second c) Power on the system again.
  • Page 29 Pin3 7. CN1: (64 Pin PCIe x4 Gold Finger) Connector for daughter board TB-616. Contain eDP/2xUSB2.0/Backlight Power & Control/Power LED/HDD LED. 8. CN2: (1.27mm Pitch 2x30 Female Header).For expand output connector, It provides four GPIO,two USB 2.0, one SPI, two Uart,one PCIex1,one SMbus, connected to the TB-528 riser Card. Function Signal Name Pin#...
  • Page 30 9. CN4: (1.25mm Pitch 2x15 Connector, DF13-30DP-1.25V) Connector for smart battery charger board PB-434 & PoE power input. If you need technical support, please contact your sales or dealer window for technical support. Signal Name Pin# Pin# Signal Name BAT_12V_S5 BAT_12V_S5 BAT_12V_S5 BAT_12V_S5...
  • Page 31 (2 x RJ45 Connector) Provide 2.5GbE LAN via Intel ® I226-LM. 13. LINE_OUT1: (Diameter 3.5mm Jack) Provide line-out via onboard Realtek ALC888S codec. 14. F_AUDIO1: (2.0mm Pitch 2x6 Pin Header) Provide line-in/line-out/mic-in via onboard Realtek ALC888S codec. Signal Name Pin# Pin# Signal Name 5V_S5...
  • Page 32 17. USB2: (2.0mm Pitch 2x5 Pin Header) Provide 2xUSB2.0 signals. Signal Name Pin# Pin# Signal Name 5V_USB47 5V_USB47 USB4_N USB7_N USB4_P USB7_P 18. COM1: (DB9 connector) Provide serial RS232/422/485 via standard DB9 male connector. Default is set to RS232, RS422/485 can be selected via BIOS. Pin 9 RI/5V/12V select via JP1. RS232 (Default): Pin# Signal Name...
  • Page 33 RS422 (option): Pin# Signal Name 422_TX- 422_TX+ 422_RX+ 422_RX- BIOS Setup：Serial Port 1 Configuration【RS-422】 RS485 (option): Pin# Signal Name 485- 485+ BIOS Setup：Serial Port 1 Configuration【RS-485】 19. JP1: (2.0mm Pitch 2x3 Pin Header) For COM1 pin9 signal setting. JP1 Pin# Function Close 1-2 COM1 Pin9 RI (Ring Indicator, Default)
  • Page 34 RI/5V/12V via JP2 21. JP2: (2.0mm Pitch 2x3 Pin Header) For COM2 pin9 signal setting. JP1 Pin# Function Close 1-2 COM2 Pin9 RI (Ring Indicator, Default) Close 3-4 COM2 Pin9 = +5V Close 5-6 COM2 Pin9 = +12V 22. GPIO1: (2.0mm Pitch 2x5 Pin Header) Provide 8xGPIO(4xDI,4xDO) with 5V VCC.
  • Page 35 (2.0mm Pitch 2 Pin Wafer Header) Pin# Signal Name Pin1 FP_PWRBTN- Pin2 (2.5mm Pitch DINKLE_ECH250R-02P) Pin# Signal Name Pin1 FP_PWRBTN- Pin2 25. BT3: (2.0mm Pitch 2 Pin Wafer Header) Provide connector for system reset button function. Pin# Signal Name Pin1 SYS_RST- Pin2 26.
  • Page 36 28. M2-B1: (M.2 M-Key Socket) Support 2242/2280 SATA III interface SSD. 29. M2_E1: (M.2 E-Key Socket) Provide USB2.0/PCIex1, support E-key 2230 WiFi/BT expansion cards. Status LED is supported via green LED M2E_WLAN_LED. 30. SATA1: (SATA 7Pin) SATA connector provide SATA III signal for storages. 31.
  • Page 37 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 13V_12V_DC 13V+BAT_S5 13V_12V_DC Ground POE_ON FP_PWRBTN- ECA1_CHG1_UP 3P3V_ALLS ECH4_EN_CHG1 3P3V_ALLS ECH5_EN_BAT1 SMB_DAT_BAT1 SMB_CLK_BAT1 VCC_BAT1 BAT1_TEMP- VCC_BAT1 Ground BAT_1: (1.25mm Pitch 1x9 Pin Header). Connection to 3S1P Smart Battery charger. Pin# Signal Name Remarks VCC_BAT1 VCC_BAT1 Voltage：DC12.6V...
  • Page 38 (1.25mm Pitch, DF13-30P),Connect the CN_434 Connector of PB-434 R2.00 to the CN434 connector of SBC-7131. Signal Name Pin# Pin# Signal Name 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 13V_12V_DC 13V+BAT_S5 13V_12V_DC Ground POE_ON FP_PWRBTN- ECA1_CHG1_UP 3P3V_ALLS ECH4_EN_CHG1 3P3V_ALLS ECH5_EN_BAT1...
  • Page 39 LED_3 STATUS. Green LED for 3P3V_BAT status. 3. TB-616 This is the front panel daughter board. The size of this board is: 90 x 20 mm. PCIX4: (64 Pin PCIe x4 Socket) Connector to SBC-7131. Contain eDP/2xUSB2.0/Backlight Power & Control/Power LED/HDD LED from SBC-7131.
  • Page 40 PANEL_EN PANEL_BKTCTRL (1.25mm Pitch 2pin Wafer Header),for ambient light sensor. Pin# Signal Name (1.25mm Pitch 4pin Wafer Header),provides system & HDD LED. Pin# Signal Name 3.3V SUS_LED HD_LED 3.3V (1.25mm Pitch 4pin Wafer Header),provides 1 x USB2.0. Pin# Signal Name USB2_DP8 USB2_DN8 (2.00mm Pitch 1x5pin Header),for MCU FW programing...
  • Page 41 2.6 M.2 Slot Installation 1. M.2 Module installation Before installing the M.2 module into the M.2 socket, please make sure that the following safety cautions are well-attended. Make sure the PC and all other peripheral devices connected to it has been powered down.
  • Page 42 Step 3: Screw tight the card onto the stand-off with a screw driver and a stand-off screw until the gap between the card and the stand-off closes up. The card should be lying parallel to the board when it’s correctly mounted. 2.
  • Page 43 Chapter 3 BIOS Setup Description 3.1 Operations after POST Screen After CMOS discharge or BIOS flashing operation. Press [Delete] key to enter CMOS Setup. After optimizing and exiting CMOS Setup 3.2 BIOS SETUP UTILITY Press [Delete] key to enter BIOS Setup utility during POST, and then a main menu containing system summary information will appear.
  • Page 44 3.3 Main Settings Aptio Setup - AMI Main Advanced Chipset Security Boot Save & Exit BIOS Information Choose the system default Project Version 7131V001 language EC VERSION 7131E210 Build Date and Time 06/14/2023 16:22:58 Compute Die Information Name Elkhart Lake ULX Type Intel Atom(R) X6425E...
  • Page 45 3.4 Advanced Settings Aptio Setup - AMI Main Advanced Chipset Security Boot Save & Exit ►CPU Configuration ►Power & Performance ►Thermal Configuration ►Trusted Computing ►ACPI Settings ►Super IO Configuration ►Hardware Monitor →←: Select Screen ►GOP Settingr ↑↓ : Select Item ►Acoustic Management Configuration Enter: Select ►AMI Graphic Output Protocol Policy...
  • Page 46 [Disabled] [Enabled] Intel (VNX) Virtualization Technology: [Disabled] [Enabled] PECI: [Disabled] [Enabled] Active Processor Cores: [ALL] BIST: [Disabled] [Enabled] AP threads Idle Manner: [HALT Loop] [MWAIT Loop] [RUN Loop] AES: [Disabled] [Enabled] MachineCheck: [Disabled] [Enabled] MonitorMWait: [Disabled] [Enabled] CPU SMM Enhancement CPU SMM Enhancement SMM Use Delay Indication: [Disabled]...
  • Page 47 #AC Split Lock: [Enabled] [Disabled] 3.4.2 Power & Performance Power & Performance CPU – Power Management Control CPU – Power Management Control P0 Fused Max Core Ratio P1 Fused Max Core Ratio P2 Fused Max Core Ratio P3 Fused Max Core Ratio Boot performance mode: [Max Battery] [Max Non-Turbo Performance]...
  • Page 48 [Enabled] View/Configure Turbo Options Current Turbo Settings Max Turbo Power Limit 4095.875 Min Turbo Power Limit Package TDP Limit 10.0 Power Limit 1 10.0 Power Limit 2 20.0 1-core Turbo Ratio 2- core Turbo Ratio 3- core Turbo Ratio 4- core Turbo Ratio Energy Efficient P-state: [Disabled] [Enabled]...
  • Page 49 PSYS PMax Power Acoustic Noise Settings Acoustic Noise Settings Acoustic Noise Mitigation: [Disabled] [Enabled] VccIn VR Domain Disable Fast PKG C State Ramp for VccIn Domain: [FALSE] [TRUE] Slow Slew Rate for VccIn Domain: [Fast/2] [Fast/4] [Fast/8] [Fast/16] VccIn VR Settings VccIn VR Domain VR Config Enable: [Disabled]...
  • Page 50 [1 ms] [2 ms] [3 ms] [4 ms] [5 ms] [6 ms] [7 ms] [8 ms] [9 ms] [10 ms] TDC Lock: [Disabled] [Enabled] RFI Settings RFI Domain RFI Current Frequency 139.200MHz RFI Frequency RFI Spread Spectrum Platform PL1 Enable: [Disabled] [Enabled] Platform PL2 Enable:...
  • Page 51 [Enabled] CState Pre-Wake: [Disabled] [Enabled] IO MWAIT Redirection: [Disabled] [Enabled] Package C State Limit [C3] C6/C7 Short Latency Control(MSR 0x60B) Time Unit [1024 ns] Latency C6/C7 Short Latency Control(MSR 0x60C) Time Unit [1024 ns] Latency C8 Latency Control(MSR 0x633) Time Unit [1024 ns] Latency C9 Latency Control(MSR 0x634)
  • Page 52 [Disabled] [Enabled] EPG DIMM Idd3N EFG DIMM Idd3P Power Limit 3 Settings CPU Lock Configuration CFG Lock: [Disabled] [Enabled] Overclocking Lock: [Disabled] [Enabled] GT – Power Management Control GT – Power Management Control Maximum GT frequency: [Default Max Frequency] [100Mhz] [150Mhz] [200Mhz] [250Mhz]]...
  • Page 53 3.4.3 Thermal Configuration Thermal Configuration Enable All Thermal Funcations: [Disabled] [Enabled] CPU Thermal Configuration Cpu Thermal Configuration DTS SMM: [Disabled] [Enabled] [Critical Temp Reporting(Out of spec)] Tcc Activation Offset Tcc Offset Time Window: [Disabled] [5ms] [10 ms] [55 ms] [156 ms] [375 ms] [500 ms] [750 ms]...
  • Page 54 [56 sec] [64 sec] [80 sec] [96 sec] [112 sec] [128 sec] [160 sec] [192 sec] [224 sec] [256 sec] [320 sec] [384 sec] [448 sec] Tcc Offset Clamp Enable: [Disabled] [Enabled] Tcc Offset Lock Enable: [Disabled] [Enabled] Bi-directional PROCHOT#: [Disabled] [Enabled] Disable PROCHOT# Output:...
  • Page 55 [15 C] [23 C] [31 C] [39 C] [47 C] [55 C] [63 C] [71 C] [79 C] [87 C] [95 C] [100 C] [103 C] [111 C] [119 C (POR)] [127 C] [130 C] Active Trip Point 0: [Disabled] [15 C] [23 C] [31 C]...
  • Page 56 [63 C] [71 C] [79 C] [87 C] [95 C] [103 C] [111C] [119 C (POR)] Active Trip Point 1 Fan Speed: Passive Trip Point : [Disabled] [15 C] [23 C] [31 C] [39 C] [47 C] [55 C] [63 C] [71 C] [79 C] [87 C]...
  • Page 57 CPU Energy Read: [Disabled] [Enabled] CPU Temp Read: [Disabled] [Enabled] Alert Enable Lock: [Disabled] [Enabled] CPU Temp CPU Fan Speed DPTF Configuration DPTF Configuration Hardware Health Monitor Hardware Health Monitor Thermal Sensor 1 Temp 0.0 C Thermal Sensor 2 Temp 0.0 C Thermal Sensor 3 Temp 0.0 C...
  • Page 58 3.4.6 Super IO Configuration Super IO Configuration Super IO Chip IT8786 Serial Port 1 Configuration Serial Port 1 Configuration Serial Port: [Disabled] [Enabled] Device Settings IO=3F8h; IRQ=4; Change Settings: [Auto] [IO=3F8h; IRQ=4] [IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;] COM1 Config: [RS232 mode] [RS485 mode]...
  • Page 59 [Enabled] Device Settings IO=3E8h; IRQ=4; Change Settings: [Auto] Serial Port 4 Configuration Serial Port 4 Configuration Serial Port: [Disabled] [Enabled] Device Settings IO=2E8h; IRQ=4; Change Settings: [Auto] Serial Port 5 Configuration Serial Port 5 Configuration Serial Port: [Disabled] [Enabled] Device Settings IO=2F0h;...
  • Page 60 3.4.7 Hardware Monitor Pc Health Status System temperature1 : +39 C Fan1 Speed : 6887 RPM CPU_CORE_VIN : +1.653 V +1.2V : +1.236 V +12V : +13.120 V : +5.123 V Smart Fan Function Fan 1 Setting Fan 1 Setting Smart Fan 1 Mode: [Software Mode] [Automatic Mode]...
  • Page 61 No NVME Device Found 3.5 Chipset Settings Aptio Setup - AMI Main Advanced Chipset Security Boot Save & Exit ►System Agent (SA) Configuration System Agent (SA) ►PCH-IO Configuration Parameters →←: Select Screen ↑↓ : Select Item Enter: Select +/- : Charge Opt. F1 : General Help F2: Previous Values F3:Optimized Defaults...
  • Page 62 [1- Enabled for WARM or HOT] [2- Enabled HOT only] LPDDR Thermal Sensor: [Disabled] [Enabled] SelfRefresh Enable: [Disabled] [Enabled] SelfRefresh IdleTimer: Throttler CKEMin Defeature: [Enabled] [Disabled] Throttler CKKEMin Timer: For LPDDR Only: Throttler CKEMin Defeature: [Enabled] [Disabled] For LPDDR Only: Throttler CKEMin Timer: 64 Dram Power Meter Dram Power Meter Use user provided power weights,...
  • Page 63 Read Energy Ch1Dimm0 Write Energy Ch1Dimm0 Idle Energy Ch1Dimm1 PowerDown Energy Ch1Dimm1 Activate Energy Ch1Dimm1 Read Energy Ch1Dimm1 Write Energy Ch1Dimm1 Memory Thermal Reporting Lock Thermal Management Registers: [Disabled] [Enabled] Memory Thermal Reporting Extern Therm Status: [Disabled] [Enabled] Closed Loop Therm Manage: [Disabled] [Enabled] Open Loop Therm Manage:...
  • Page 64 Warm Budget Ch1 Dimm1 Hot Budget Ch1 Dimm0 Hot Budget Ch1 Dimm1 Memory RAPL Memory RAPL Rap1 Power Floor Ch0 Rap1 Power Floor Ch1 RAPL PL Lock: [Disabled] [Enabled] RAPL PL 1 enable: [Disabled] [Enabled] RAPL PL 1 Power RAPL PL 1 WindowX RAPL PL 1 WindowY RAPL PL 2 enable: [Disabled]...
  • Page 65 Receive Enable Training: [Disabled] [Enabled] Jedec Write Leveling: [Disabled] [Enabled] LPDDR4 Write DQ DQS Retraining: [Disabled] [Enabled] Early Write Time Centering 2D: [Disabled] [Enabled] Early Read Time Centering 2D: [Disabled] [Enabled] Write Timing Centering 1D: [Disabled] [Enabled] Write Voltage Centering 1D: [Disabled] [Enabled] Read Timing Centering 1D:...
  • Page 66 Read Equalization Training*: [Disabled] [Enabled] Read Amplifier Training*: [Disabled] [Enabled] Write Timing Centering 2D: [Disabled] [Enabled] Read Timing Centering 2D: [Disabled] [Enabled] Command Voltage Centering: [Disabled] [Enabled] Write Voltage Centering 2D: [Disabled] [Enabled] Read Voltage Centering 2D: [Disabled] [Enabled] Late Command Training: [Disabled] [Enabled] Round Trip Latency:...
  • Page 67 Memory Test: [Disabled] [Enabled] DIMM SPD Alias Test: [Disabled] [Enabled] Receive Enable Centering 1D: [Disabled] [Enabled] Retrain Margin Check: [Disabled] [Enabled] Write Drive Strength Up/ Dnindependently: [Disabled] [Enabled] Command Slew Rate Training: [Disabled] [Enabled] Command Drive Strength and Equalization: [Disabled] [Enabled] Command Normalization: [Disabled]...
  • Page 68 Write TC0 DqsTraining: [Disabled] [Enabled] Duty Cycle Correction: [Disabled] [Enabled] DQ DFE Training: [Disabled] [Enabled] Sense Amplifier Correction Training: [Disabled] [Enabled] Memory Configuration Memory RC Version 0.0.4.104 Memory Data Rate 3200 MTPS Memory Timings (tCL-tRCD-tRP-tRAS) 22-22-22-52 Channel 0 Slot 0 Not Populated / Disabled Channel 0 Slot 1 Not Populated / Disabled...
  • Page 69 [1600] [1800] [1867] [2000] [2133] [2200] [2400] [2600] [2667] [2800] [2933] [3000] [3200] [3467] [3600] [3733] [4000] [4200] [4267] HOB Buffer Size: [Auto] [1B] [1KB] [Max (assuming 63KB total HOB size)] Max TOLUD: [Dynamic] [1 GB] [1.25 GB] [1.5 GB] [1.75 GB] [2 GB] [2.25 GB]...
  • Page 70 Retrain on Fast Fail: [Disabled] [Enabled] DDR4_1DPC: [Disabled] [Enabled on DIMM0 only] [Enabled on DIMM1 only] [Enabled] Enable RH Prevention: [Disabled] [Enabled] REFRESH_PANIC_WM: REFRESH_HP_WM: Exit On Failure (MRC): [Disabled] [Enabled] Enable/Disable IED (Intel Enhanced Debug): [Enabled] [Disabled] Ch Hash Support: [Disabled] [Enabled] Ch Hash Mask:...
  • Page 71 [APD] [PPD-DLLoff] Page Close Idle Timeout: [Enabled] [Disabled] Memory Scrambler: [Enabled] [Disabled] Force ColdReset: [Enabled] [Disabled] Channel 0 DIMM Control: [Enable both DIMMs] [Disable DIMM0] [Disable DIMM1] [Disable both DIMMs] Channel 1 DIMM Control: [Enable both DIMMs] [Disable DIMM0] [Disable DIMM1] [Disable both DIMMs] Force Single Rank: [Disabled]...
  • Page 72 [Enabled] Rank Margin Tool Per Task: [Disabled] [Enabled] Training Tracing: [Disabled] [Enabled] Lpddr Mem WL Set: [Set A] [Set B] BDAT Memory Test Type [Rank Margin Tool Rank] Rank Margin Tool Loop Count: Low Supply for LPDDR4 Data: [Disabled] [Enabled] Low Supply for LPDDR4 Clock/Command/Control: [Disabled]...
  • Page 73 [PCIE 7] [PCIE 8] [PCIE 9] [PCIE 10] [PCIE 11] [PCIE 12] [PCIE 13] [PCIE 14] [PCIE 15] [PCIE 16] [PCIE 17] [PCIE 18] [PCIE 19] Internal Graphics: [Auto] [Disabled] [Enabled] GTT Size: [2 MB] [4 MB] [8 MB] Aperture Size: [128 MB] [256 MB] [512 MB]...
  • Page 74 [24M] [28M] [32M/F7] [36M] [40M] [44M] [48M] [52M] [56M] [60M] DVMT Total Gfx Mem: [128M] [256M] [MAX] DISM Size: [0GB] [1GB] [2GB] [3GB] [4GB] [5GB] [6GB] [7GB] Intel Graphics Pei Display Peim: [Enabled] [Disabled] VDD Enable: [Disabled] [Enabled] Configure GT for use: [Enabled] [Disabled] PAVP Enable:...
  • Page 75 [652.8 Mhz] [Max CdClock freq based on Reference C1k] Skip Full CD Clock Init: [Enabled] [Disabled] VBT Select: [eDP] [MIPI] IUER Button Enable: [Disabled] [Enabled] Intel(R) Ultrabook Event Support: Intel(R) Ultrabook Event Support IUER Slate Enable: [Disabled] [Enabled] IUER Dock Enable: [Disabled] [Enabled] VT-d:...
  • Page 76 [Enabled] Compliance Test Mode: [Disabled] [Enabled] PCH PCI Express Clock Gating: [Platform-POR] [Enabled] [Disabled] PCIe function swap: [Disabled] [Enabled] PCIe EQ settings PCIe EQ override: [Disabled] [Enabled] PCIe Express Root Port 1 PCIe Express Root Port 1: [Disabled] [Enabled] Connection Type: [Built - in] [Slot] ASPM:...
  • Page 77 EDPC: [Disabled] [Enabled] URR: [Disabled] [Enabled] FER: [Disabled] [Enabled] NFER: [Disabled] [Enabled] CER: [Disabled] [Enabled] SEFE: [Disabled] [Enabled] SENFE: [Disabled] [Enabled] SECE: [Disabled] [Enabled] PME SCI: [Disabled] [Enabled] Hot Plug: [Disabled] [Enabled] Advanced Error Reporting: [Disabled] [Enabled] PCIe Speed: [Auto] [Gen1] [Gen2] [Gen3]...
  • Page 78 Extra Bus Reserved: Reserved Memory: Reserved I/O: PCH PCIe LTR Configuration LTR: [Disabled] [Enabled] Snoop Latency Override: [Disabled] [Manual] [Auto] Non Snoop Latency Override: [Disabled] [Manual] [Auto] Force LTR Override: [Disabled] [Enabled] LTR Lock: [Disabled] [Enabled] Extra options Detect Non-Compliance Device: [Disabled] [Enabled] Prefetchable Memory:...
  • Page 79 [L0sL1] [Auto] L1 Substates: [Disabled] [L1.1] [L1.1 & L1.2] ACS: [Disabled] [Enabled] PTM: [Disabled] [Enabled] DPC: [Disabled] [Enabled] EDPC: [Disabled] [Enabled] URR: [Disabled] [Enabled] FER: [Disabled] [Enabled] NFER: [Disabled] [Enabled] CER: [Disabled] [Enabled] SEFE: [Disabled] [Enabled] SENFE: [Disabled] [Enabled] SECE: [Disabled] [Enabled] PME SCI:...
  • Page 80 Hot Plug: [Disabled] [Enabled] Advanced Error Reporting: [Disabled] [Enabled] PCIe Speed: [Auto] [Gen1] [Gen2] [Gen3] Transmitter Half Swing: [Disabled] [Enabled] Detect Timeout: Extra Bus Reserved: Reserved Memory: Reserved I/O: PCH PCIe LTR Configuration LTR: [Disabled] [Enabled] Snoop Latency Override: [Disabled] [Manual] [Auto] Non Snoop Latency Override:...
  • Page 81 Reserved Memory Alignment: Prefetchable Memory Alignment: PCIe Express Root Port 3 PCIe Express Root Port 3: [Disabled] [Enabled] Connection Type: [Built - in] [Slot] ASPM: [Disabled] [L0s] [L1] [L0sL1] [Auto] L1 Substates: [Disabled] [L1.1] [L1.1 & L1.2] ACS: [Disabled] [Enabled] PTM: [Disabled] [Enabled]...
  • Page 82 CER: [Disabled] [Enabled] SEFE: [Disabled] [Enabled] SENFE: [Disabled] [Enabled] SECE: [Disabled] [Enabled] PME SCI: [Disabled] [Enabled] Hot Plug: [Disabled] [Enabled] Advanced Error Reporting: [Disabled] [Enabled] PCIe Speed: [Auto] [Gen1] [Gen2] [Gen3] Transmitter Half Swing: [Disabled] [Enabled] Detect Timeout: Extra Bus Reserved: Reserved Memory: Reserved I/O: PCH PCIe LTR Configuration...
  • Page 83 Non Snoop Latency Override: [Disabled] [Manual] [Auto] Force LTR Override: [Disabled] [Enabled] LTR Lock: [Disabled] [Enabled] Extra options Detect Non-Compliance Device: [Disabled] [Enabled] Prefetchable Memory: Reserved Memory Alignment: Prefetchable Memory Alignment: PCIe Express Root Port 4 Lane configured as USB/SATA/UFS PCIe Express Root Port 5 Lane configured as USB/SATA/UFS PCI Express Root Port 6 Lane configured as USB/SATA/UFS...
  • Page 84 ACS: [Disabled] [Enabled] Multi-VC: [Disabled] [Enabled] VC to TC Mapping TC0: TC1: [VC0] [VC1] TC2: [VC0] [VC1] TC3: [VC0] [VC1] TC4: [VC0] [VC1] TC5: [VC0] [VC1] TC6: [VC0] [VC1] TC7: [VC0] [VC1] PTM: [Disabled] [Enabled] DPC: [Disabled] [Enabled] EDPC: [Disabled] [Enabled] URR: [Disabled]...
  • Page 85 [Disabled] [Enabled] NFER: [Disabled] [Enabled] CER: [Disabled] [Enabled] SEFE: [Disabled] [Enabled] SENFE: [Disabled] [Enabled] SECE: [Disabled] [Enabled] PME SCI: [Disabled] [Enabled] Hot Plug: [Disabled] [Enabled] Advanced Error Reporting: [Disabled] [Enabled] PCIe Speed: [Auto] [Gen1] [Gen2] [Gen3] Transmitter Half Swing: [Disabled] [Enabled] Detect Timeout: Extra Bus Reserved:...
  • Page 86 Snoop Latency Override: [Disabled] [Manual] [Auto] Non Snoop Latency Override: [Disabled] [Manual] [Auto] Force LTR Override: [Disabled] [Enabled] LTR Lock: [Disabled] [Enabled] Extra options Detect Non-Compliance Device: [Disabled] [Enabled] Prefetchable Memory: Reserved Memory Alignment: Prefetchable Memory Alignment: PCIE clocks Clock0 assignment: [Platform-POR] [Enabled] [Disabled]...
  • Page 87 [Disabled] ClkReq for Clock2: [Platform-POR] [Disabled] Clock3 assignment: [Platform-POR] [Enabled] [Disabled] ClkReq for Clock3: [Platform-POR] [Disabled] Clock4 assignment: [Platform-POR] [Enabled] [Disabled] ClkReq for Clock4: [Platform-POR] [Disabled] Clock5 assignment: [Platform-POR] [Enabled] [Disabled] ClkReq for Clock5: [Platform-POR] [Disabled] SATA Configuration SATA Configuration SATA Controller(s): [Enabled] [Disabled]...
  • Page 88 LED Locate: [Disabled] [Enabled] Serial ATA Port 0 Empty Software Preserve unknown Port 0: [Disabled] [Enabled] Hot Plug: [Disabled] [Enabled] Configured as eSATA Hot Plug supported External: [Disabled] [Enabled] Spin Up Device: [Disabled] [Enabled] SATA Device Type: [Hard Disk Drive] [Solid State Drive] Topology: [Unknown]...
  • Page 89 Software Preserve unknown Port 1: [Disabled] [Enabled] Hot Plug: [Disabled] [Enabled] Configured as eSATA Hot Plug supported External: [Disabled] [Enabled] Spin Up Device: [Disabled] [Enabled] SATA Device Type: [Hard Disk Drive] [Solid State Drive] Topology: [Unknown] [ISATA] [Direct Connect] [Flex] [M2] SATA Port 1 DevSlp: [Disabled]...
  • Page 90 [Enabled] Configured as eSATA Hot Plug supported External: [Disabled] [Enabled] Spin Up Device: [Disabled] [Enabled] SATA Device Type: [Hard Disk Drive] [Solid State Drive] Topology: [Unknown] [ISATA] [Direct Connect] [Flex] [M2] SATA Port 2 DevSlp: [Disabled] [Enabled] SATA Port 2 RxPolarity: [Disabled] [Enabled] DITO Configuration:...
  • Page 91 [GEN2] USB PDO Programming: [Disabled] [Enabled] USB Overcurrent: [Disabled] [Enabled] USB Internal Pullup resistor: [Disabled] [Enabled] USB Overcurrent Lock: [Disabled] [Enabled] USB Port Disable Override: [Disabled] [Select Per-Pin] USB Device/HOST Mode Override: [Disabled] [Select Per-Pin] USB UCSI ACPI device: [Disabled] [Enabled] SCS Configuration eMMC 5.1 Controller:...
  • Page 92 [Disabled] [Enabled] State After G3 [S5 state] [S0 state] 3.6 Security Settings Aptio Setup - AMI Main Advanced Chipset Security Boot Save & Exit Password Description Set Administrator Password If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup.
  • Page 93 3.7 Boot Settings Aptio Setup - AMI Main Advanced Chipset Security Boot Save & Exit Boot Configuration Number of seconds toWait for Setup Prompt Timeout Setup Activation key. Bootup NumLock State [Off] 65535(0xFFFF)means Indef Quiet Boot [Enabled] inite waiting. Boot Option Priorities Fast Boot [Disabled] →←: Select Screen...
  • Page 94 Quiet Boot: [Disabled] [Enabled] Fast Boot: [Disabled] [Enabled] 3.8 Save & Exit Settings Aptio Setup - AMI Main Advanced Chipset Boot Security Save & Exit Save options Exit system setup after Save Changes and Exit Saving the changes. Discard Changes and Exit Save Changes and Reset Discard Changes and Reset Save Changes...
  • Page 95 Reset the system after Saving The changes? [Yes] [No] Discard Changes and Reset Reset system setup without Saving any changes? [Yes] [No] Save Changes Save Setup done so far to any of the setup options? [Yes] [No] Discard Changes Discard Changes done so far to any of the setup options? [Yes] [No] Restore Defaults...
  • Page 96 Chapter 4 Installation of Drivers This chapter describes the installation procedures for software and drivers under the windows 10. The software and drivers are included with the motherboard. The contents include Intel Chipset, Graphics chipset driver, Audio driver, Intel LAN Driver, Intel® Serial I/O, Intel® Management and Security Status Installer, Intel®...
  • Page 97 4.1 Intel Chipset To install the Intel chipset driver, please follow the steps below. Step 1. Here is welcome page. Please make sure you save and exit all programs before install. Click Next. Step 2. Read the license agreement. Click Accept to accept all of the terms of the license agreement.
  • Page 98 Step 3. Click Install to begin the installation. Step 4. Select Restart Now to reboot your computer for the changes to take effect. AUHMI-8XXB Series User Manual...
  • Page 99 4.2 Intel® HD Graphics Chipset To install the Intel® HD Graphics Chipset, please follow the steps below. Step 1. Click Begin installation. Step 2. Read the license agreement. Click Yes to accept all of the terms of the license agreement. And Click Next to setup program Step 3.
  • Page 100 AUHMI-8XXB Series User Manual...
  • Page 101 Step 4. Click Finish to complete installation. AUHMI-8XXB Series User Manual...
  • Page 102 4.3 Realtek HD Audio Driver Installation To install the Realtek HD Audio Driver, please follow the steps below. Step 1. Click Next to continue. Step 2. Click Yes, I want to restart my computer now. Click Finish to complete the installation. AUHMI-8XXB Series User Manual...
  • Page 103 4.4 Intel® Management Engine Interface To install the Intel® Management Engine Interface, please follow the steps below. Step 1. Select setup language you need. Click Next to continue. Step 2. Choose I accept the terms in the License Agreement and click Next to begin the installation.
  • Page 104 Step 3. Click Next to continue. Step 4. Click Finish to complete the installation. AUHMI-8XXB Series User Manual...
  • Page 105 4.5 LAN Driver To install the LAN driver, please follow the steps below. Step 1. Click Next to continue. Step 2. Choose I accept the terms in the License Agreement and click Next to begin the installation. AUHMI-8XXB Series User Manual...
  • Page 106 Step 3. Click Next to continue. Step 4. Click Install to begin the installation. AUHMI-8XXB Series User Manual...
  • Page 107 AUHMI-8XXB Series User Manual...
  • Page 108 4.6 Touch Screen Installation This chapter describes how to install drivers and other software that will allow your touch screen work with different operating systems. 4.6.1 Windows 10 Universal Driver Installation for PenMount 6000 Series Before installing the Windows 10 driver software, you must have the Windows 10 system installed and running on your computer.
  • Page 109 Step 2. Read the license agreement. Click I Agree to agree the license agreement. Step 3. Choose the folder in which to install PenMount Windows Universal Driver. Click Install to start the installation. AUHMI-8XXB Series User Manual...
  • Page 110 Step 4. Click Yes to continue. Step 5. Click Finish to complete installation. 4.6.2 Software Functions Resistive Touch Upon rebooting, the computer automatically finds the new 6000 controller board. The touch screen is connected but not calibrated. Follow the procedures below to carry out calibration. 1.
  • Page 111 Calibrate This function offers two ways to calibrate your touch screen. ‘Standard Calibration’ adjusts most touch screens. ‘Advanced Calibration’ adjusts aging touch screens. Standard Calibration Click this button and arrows appear pointing to red squares. Use your finger or stylus to touch the red squares in sequence.
  • Page 112 Step 1. Please select a device then click “Configure”. You can also double click the device too. Step 2.Click “Standard Calibration” to start calibration procedure AUHMI-8XXB Series User Manual...
  • Page 113 NOTE: The older the touch screen, the more Advanced Mode calibration points you need for an accurate calibration. Use a stylus during Advanced Calibration for greater accuracy. Please follow the step as below: Step 3. Select Device to calibrate, then you can start to do Advanced Calibration. NOTE: Recommend to use a stylus during Advanced Calibration for greater accuracy.
  • Page 114 Plot Calibration Data Check this function and a touch panel linearity comparison graph appears when you have finished Advanced Calibration. The blue lines show linearity before calibration and black lines show linearity after calibration. Turn off EEPROM The function disable for calibration data to write in storage Controller.
  • Page 115 Click on Touch – Select this mode and mouse only provides a click function, and dragging is disables. Beep Sound Enable Beep Sound – turns beep function on and off Beep on Pen Down – beep occurs when pen comes down Beep on Pen Up –...
  • Page 116 Multiple Monitors Multiple Monitors support from two to six touch screen displays for one system. The PenMount drivers for Windows 7/8/8.1 support Multiple Monitors. This function supports from two to six touch screen displays for one system. Each monitor requires its own PenMount touch screen control board, either installed inside the display or in a central unit.
  • Page 117 When the mapping screen message appears, click OK. Touch each screen as it displays “Please touch this monitor”. Following this sequence and touching each screen is called mapping the touch screens. Touching all screens completes the mapping and the desktop reappears on the monitors. Select a display and execute the “Calibration”...
  • Page 118 NOTES: 1. If you use a single VGA output for multiple monitors, please do not use the Multiple Monitor function. Just follow the regular procedure for calibration on each of your desktop monitors. 2. The Rotating function is disabled if you use the Multiple Monitor function. 3.
  • Page 119 Beep Setting Beep function for each device Right Button When you select this function, a mouse icon appears in the right-bottom of the screen. Click this icon to switch between Right and Left Button functions. Exit Exits the PenMount Monitor function. Configuring the Rotate Function 1.

This manual is also suitable for:

Auhmi-9 c seriesAuhmi-810bpAuhmi-816bpAuhmi-821bp