Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ECOVACS WINBOT MINI
Summary of Contents for ECOVACS WINBOT MINI
- Page 1 Instruction Manual...
- Page 2 Important Safety Instructions and it is not raining or snowing. 4. Before use, please use the Carabiner to lock When using an electrical appliance, basic the safety tether to a strong indoor railing, and precautions should always be followed, including make sure WINBOT is securely attached to it.
- Page 3 use on surfaces with gaps, such as a piece 21. To reduce the risk of electrical shock, do not of glass with gaps or holes, or two pieces of put the Appliance in water or other liquid. Do adjacent, frameless glass with a gap between not place or store Appliance where it can fall them, so as to prevent the Appliance from or be pulled into a tub or sink.
- Page 4 28. The Safety Battery must be replaced by the on, is leaking, remove WINBOT immediately manufacturer or its service agent in order to after cleaning is completed. avoid a hazard. 38. Before cleaning, please observe the area 29. The Safety Battery must be removed and toattach WINBOT for any small particles.
- Page 5 For EU Countries Class II For EU Declaration of Conformity information, visit https://www.ecovacs.com/global/compliance Short-circuit-proof safety isolating transformer Switch mode power supply For indoor use only Correct Disposal of this Product This marking indicates that this product should Direct current not be disposed of with other household waste throughout the EU.
- Page 6 1. Product Contents Package Contents Instruction Manual Instruction Manual WINBOT + Safety Rope Power Adapter + Power Cord ECOVACS WINBOT Cleaning Solution Mopping Pad * Figures and illustrations are for reference only and may differ from actual product appearance.
- Page 7 Product Diagram WINBOT Spray Nozzles Filling Opening Speaker Status Indicator Light/ Start/Pause Button Spray Nozzles Bottom View Spherical Sensors Side Rollers Self-Cleaning Brush Driving Wheel Tracks Suction Sensor Status Indicator Light 7 EN...
- Page 8 2. Quick Start 2.1 Notes Before Cleaning The following situations are not recommended for using WINBOT: Do not use WINBOT on windows that are too Do not use WINBOT on windows with small or have irregular shapes. condensation or oil stains or in extremely cold or hot environments.
- Page 9 Do not use WINBOT on uneven windows. Do not use WINBOT on windows that are too large. WINBOT may experience insufficient air pressure in the following conditions. WINBOT may fail to complete the task due to the length limitation of the connecting cord.
- Page 10 Make sure safety rope is connected before use. Safety rope is assembled by default. Do not disassemble it at will.
- Page 11 Install Mopping Pad 3.Stick the mopping pad Stick the mopping pad onto the velcro at the bottom of WINBOT, 1.Wet the mopping pad with its groove corresponding to the blue mark. Then press it with Before using, wet the mopping pad. your hands to help the mopping pad stick firmly.
- Page 12 Please use ECOVACS WINBOT cleaning solution. Using other cleaners could have an adverse effect on cleaning performance. If the cleaning solution is used up, you can temporarily use tap water instead. Using the ECOVACS WINBOT cleaning solution can have a better cleaning performance.
- Page 13 Connect WINBOT Power Cord, Power Adapter and Plug. Please ensure the battery is fully charged before using. Charging time will be approximately 3 hours. * Do not cut the power off when WINBOT is running, otherwise it may lead to the risk of falling. * It is particularly emphasized that the aviation plug needs to be firmly connected.
- Page 14 2.3 Quick Start Start Maintenance during Cleaning 1.Connect the power supply and long press the WINBOT start button For heavily stained glass, please wash or replace the mopping pad for 2 seconds. several times and clean the four spherical sensors in time. 2.After hearing the fan start, place the bottom of the WINBOT (the side with the mopping pad) on the glass.
- Page 15 Finish Power Off Pause During cleaning, press on WINBOT or pause it via App. Turn off the power to shut down. Remove WINBOT Unfasten Safety Rope When cleaning is complete, WINBOT will return to the starting position and beep. Please hold the handle tightly. Long press for 2 seconds, and remove it after the fan stops working.
- Page 16 Troubleshooting When the WINBOT alarms, do not panic. You can check the detailed troubleshooting guidance through the App. 2. Scan the QR code or search and download the ECOVACS HOME App in c. Remote Control the app store. Through the App, you can remotely control WINBOT. This function supports views of both inside and outside windows, spot cleaning and manual water spraying.
- Page 17 Pad becomes worn or no longer fits exactly within the fastener area, replace it Wide Side with a new one to achieve optimal cleaning performance. * Explore more accessories at ECOVACS HOME App or at https://www. Narrow Side ecovacs.com/global. https://mall.ecovacs.cn *If the velcro on the mopping pad holder is dusty, it can be cleaned with a clean cleaning brush.
- Page 18 Before cleaning, make sure that the fan is not in operation. Inspect After maintenance, you can install the the driving wheel tracks in ECOVACS HOME App. Please stop the mopping pad to continue cleaning task. driving wheel tracks if you see dirt on them. Then wipe them clean with a clean cloth.
- Page 19 4. Status Indicator Light Indicator Light Effect Light Effect Interpretation Solid Blue WINBOT is in standby or is currently cleaning. WINBOT Status Indicator Light Flashing Red WINBOT is unable to function properly. Solid Green Station consumes a low current, for instance, in standby mode. Adapter Status Indicator Light Solid Red Station consumes a high current, for instance, in charging mode.
- Page 20 5. Troubleshooting 5.1 Malfunction Elimination Malfunction Possible Causes Solutions The mopping pad is too wet. Replace the Mopping Pad as described in Maintenance. WINBOT slips, such as sliding sideways or body WINBOT wipes non-recommended stains Clean the Driving Wheel Tracks as described in shaking.
- Page 21 Malfunction Possible Causes Solutions There is no cleaning solution in the water Please add ECOVACS WINBOT cleaning solution in time. tank. The auto spraying function is turned off WINBOT does not spray Please go to the App and turn on the auto spraying function.
- Page 22 Output power of the wireless module is less than 100 mW. Note: Technical and design specifications may be changed for continues product improvement. Ecovacs Home Service Robotics Co., Ltd. No. 518 Songwei Road, Wusongjiang industry Park, Guoxiang Street, Wuzhong District, Suzhou, Jiangsu, China.
Need help?
Do you have a question about the WINBOT MINI and is the answer not in the manual?
Questions and answers