Advertisement
Quick Links
Fountain Components
Image
Item Description
Spire Fountain -
Water Feature
Spire Fountain -
Basin
Fountain Information:
• This fountain holds approximately 3 gallons of water.
• This fountain uses a medium fountain cover: FTNCOV-SM
• No refill device or submersible lights are suggested for this fountain.
Pump Information:
WP450LV - 120 GPH Low Voltage Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Component
Quantity
Item #
FT-413A
1
Ft-413B
1
FT-413 Spire Fountain
Assembly Instructions
Pump Kit Parts List
Image
Component
PK120LV Pump with Transformer
#7 Stopper
2" length of PermaGum putty
8" length of 1/2" black non-kink tubing
1" length of 5/8" clear tubing
1" length of 1/2" CPVC pipe
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
1
1
1
rev 7/25/2023
Advertisement
Related Manuals for YARDART Spire FT-413
Summary of Contents for YARDART Spire FT-413
- Page 1 FT-413 Spire Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 3 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-SM • No refill device or submersible lights are suggested for this fountain. Pump Information: WP450LV - 120 GPH Low Voltage Pump (16 ft. cord length) Tools Required: Bubble Level Screwdriver...
- Page 2 FT-413 Spire Fountain Assembly Instructions Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
- Page 3 FT-413 Spire Fountain Assembly Instructions Step 7 - Insert the CPVC end of the tubing assembly into the bottom of the water feature (FT-413A). Step 8 - Center the water feature (FT-413A) in the basin (FT-413B) ensuring that it is level. 8a - Turn the feature and coil the tubing as you lower it into position.
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.
Need help?
Do you have a question about the Spire FT-413 and is the answer not in the manual?
Questions and answers