Download
Share
Print this page
Rohde & Schwarz SMM-K60 User Manual
  1. Manuals
  2. Brands
  3. Rohde & Schwarz Manuals
  4. Portable Generator
  5. SMM-K60
  6. User manual
Rohde & Schwarz SMM-K60 User Manual

Rohde & Schwarz SMM-K60 User Manual

Bluetooth signal generation
Hide thumbs

Advertisement

Quick Links

Download this manual
®
R&S
SMM-K60/-K117/-K178
Bluetooth
User Manual
(;ÝDÄ2)
1179205402
Version 08
®
Signal Generation

Advertisement

loading
Need help?

Need help?

Do you have a question about the SMM-K60 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Rohde & Schwarz SMM-K60

Summary of Contents for Rohde & Schwarz SMM-K60

  • Page 1 ® R&S SMM-K60/-K117/-K178 ® Bluetooth Signal Generation User Manual (;ÝDÄ2) 1179205402 Version 08...
  • Page 2 This document describes the following software options: ● R&S ® SMM-K60 Bluetooth EDR (1441.1918.xx) ● ® R&S SMM-K117 Bluetooth 5.x (1441.1799.xx) ● ® R&S SMM-K178 Bluetooth 5.4 + Channel Sounding (1441.0886.xx) This manual describes firmware version FW 5.30.175.80 and later of the R&S ®...
  • Page 3 ® Contents R&S SMM-K60/-K117/-K178 Contents 1 Welcome to the Bluetooth options............7 Key features........................7 Accessing the Bluetooth dialog.................. 9 What's new........................9 Documentation overview....................9 1.4.1 Getting started manual....................9 1.4.2 User manuals and help....................9 1.4.3 Service manual......................10 1.4.4 Instrument security procedures..................10 1.4.5...
  • Page 4 ® Contents R&S SMM-K60/-K117/-K178 2.4.4 Bluetooth modulation schemes..................33 3 Bluetooth general settings..............35 4 Dirty transmitter test settings............. 39 5 Bluetooth LE configuration and settings...........44 Channel settings......................44 Advertising event and frame configuration..............51 5.2.1 Advertising event and frame settings................51 5.2.2...
  • Page 5 ® Contents R&S SMM-K60/-K117/-K178 5.5.6 CS terminate payload settings..................127 5.5.7 CS FAE payload settings.................... 127 5.5.8 CS channel map payload settings................128 Test packet configuration..................128 6 Bluetooth BR/EDR configuration and settings....... 132 Channel settings....................... 132 Packet configuration....................134 7 Signal control and signal characteristics........142 Filter/clipping settings....................142...
  • Page 6 ® Contents R&S SMM-K60/-K117/-K178 8.6.1 General configuration....................215 8.6.2 Header configuration....................216 8.6.3 Payload configuration....................219 8.6.4 Cs payload configuration.....................249 Test packet configuration commands - LE............. 266 Channel configuration commands - BR/EDR............270 Packet configuration commands - BR/EDR............271 8.10 Filter/clipping commands..................280 8.11 Power ramping commands..................287 8.12...
  • Page 7 1.1 Key features R&S SMM-K60 key features Option R&S SMM-K60 provides Bluetooth signals for basic rate (BR) and enhanced data rate (EDR) signals. These signals are in line with Bluetooth Core Specification v4.2. Also, the option provides low energy (LE) signals for the LE 1 Msymbol/s physical layer.
  • Page 8 Clipping, filter and modulation settings supported R&S SMM-K117 key features Option R&S SMM-K117 is an extension to option R&S SMM-K60. It provides Bluetooth LE signals in line with Bluetooth Core Specification v5.4. Option R&S SMM-K117 supports the following LE features: ●...
  • Page 9 ® Welcome to the Bluetooth options R&S SMM-K60/-K117/-K178 Documentation overview 1.2 Accessing the Bluetooth dialog To open the dialog with Bluetooth settings ► In the block diagram of the R&S SMM100A, select "Baseband > Bluetooth". A dialog box opens that displays the provided general settings.
  • Page 10 ® Welcome to the Bluetooth options R&S SMM-K60/-K117/-K178 Documentation overview Contains the description of the specific functions of an option. Basic information on operating the R&S SMM100A is not included. The contents of the user manuals are available as help in the R&S SMM100A. The help offers quick, context-sensitive access to the complete information for the base unit and the software options.
  • Page 11 ® Welcome to the Bluetooth options R&S SMM-K60/-K117/-K178 Documentation overview 1.4.8 Release notes and open source acknowledgment The release notes list new features, improvements and known issues of the current software version, and describe the software installation. The software uses several valuable open source software packages. An open source acknowledgment document provides verbatim license texts of the used open source software.
  • Page 12 ® Welcome to the Bluetooth options R&S SMM-K60/-K117/-K178 Notes on screenshots 1.5 Scope Tasks (in manual or remote operation) that are also performed in the base unit in the same way are not described here. In particular, it includes: ●...
  • Page 13 Baseband real-time extension (R&S SMM-K520) ● Option Bluetooth EDR (R&S SMM-K60) ● Option Bluetooth 5.x (R&S SMM-K117), requires R&S SMM-K60 ● Option Bluetooth 5.4 + Channel Sounding (R&S SMM-K178), requires R&S SMM- K117 You can generate signals via playback of waveform files at the signal generator. To cre- ate the waveform file with R&S WinIQSIM2, you do not need a specific option.
  • Page 14 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth LE Table 2-1: Operating band Frequency range RF channels k and center frequencies f 2400.0 MHz to 2483.5 MHz k = 0 to 39, f = k * 2 MHz + 2402 MHz...
  • Page 15 PHYs. The table below provides an overview including the required option. Symbol rate Required options LE 1M 1 Msymbol/s R&S SMM-K60 LE 2M 2 Msymbol/s R&S SMM-K117 The transmit time for an LE uncoded PHY packet is between 44 µs and 2120 µs. The period extends by an additional period of 16 µs to 160 µs, if CTE is active.
  • Page 16 Advertising channel packet types The advertising channel PDU has a 16-bit header and a variable-size payload. The header fields of the advertising channel PDU are as shown in "Header" on page 18. Table 2-5: Advertising packets for R&S SMM-K60 ADV_IND SCAN_REQ ADV_DIRECT_IND SCAN_RSP...
  • Page 17 The MIC calculation is specified in the section 1 of the core speci- fication for Bluetooth wireless technology, volume 6, part E. Besides the data packet type, the instrument supports the following CONTROL_DATA packet types. Table 2-7: Control data packets for R&S SMM-K60 Opcode CONTROL_DATA Opcode...
  • Page 18 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth LE 2.2.3 Advertising channel packet structure Header Header Payload 2 octets 1-255 octets PDU type ChSel TxAdd RxAdd Length 4 bits 1 bit 1bit 1 bit 1 bit 8 bits ●...
  • Page 19 The advertising channel PDU types consist of three groups. Table 2-10: Advertising channel PDU types PDU type PDU name Option Advertising PDU (legacy) ADV_IND, ADV_DIRECT_IND, ADV_NONCONN_IND, R&S SMM-K60 ADV_SCAN_IND Advertising PDU (extended) ADV_EXT_IND, AUX_ADV_IND, AUX_SYNC_IND, R&S SMM-K117 AUX_CHAIN_IND Scanning PDU SCAN_REQ, SCAN_RSP R&S SMM-K60...
  • Page 20 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth LE 2.2.4 Data channel packet structure Header Header Payload 2 octets 0-251 octets 4 octets LLID NESN Length 2 bits 1 bit 1 bit 1 bit 3 bits 8 bits The 16-bit header field consists of five fields: ●...
  • Page 21 R&S SMM-K60/-K117/-K178 About Bluetooth LE Option R&S SMM-K60 supports LE uncoded 1 Msymbol/s (LE 1M) physical layer (PHY). Option R&S SMM-K117 supports LE Coded 1 Msymbol/s PHY and an optional modu- lation scheme LE uncoded 2 Msymbol/s (LE 2M) PHY.
  • Page 22 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth LE Figure 2-4: Angle of Arrival method Angle of Departure (AoD) method A Bluetooth LE transmitter sends direction finding enabled packets using an antenna array. A receiving Bluetooth LE device, consisting of a single antenna, captures I/Q samples and the geometry of the antenna array from profile-level information.
  • Page 23 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth LE Figure 2-5: Angle of Departure method The geometry of the antenna array is information that is shared between Bluetooth LE transmitter and receiver on a profile-level. The antenna switching pattern and the method of angle estimation is specified by Constant Tone Extension.
  • Page 24 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth LE CTEInfo field Length Value Description CTETime 5 bit 2 to 20 CTE length = 8 µs * Value Other values are reserved for future use. 1 bit 1 to 2...
  • Page 25 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth LE Channel Sounding Figure 2-8: CTE structure for AoD method For more information, refer to section 2.5 Constant Tone Extension and IQ Sampling of core specification for Bluetooth wireless technology, volume 6, part B.
  • Page 26 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth BR/EDR A CS procedure exists only for a limited duration, and consists of CS events, CS sube- vents, and CS steps. CS events may contain one or more subevents. CS subevents contain two or more CS steps.
  • Page 27 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth BR/EDR Two modulation formats are used for Bluetooth: the mandatory basic rate (BR) and the optional enhanced data rate (EDR). The BR mode uses binary FM modulation and pro- vides a data rate of 1 Mbit/s. The EDR mode uses two types of PSK modulation, the π/4-DQPSK or 8DPSK, and achieves data rates of 2 Mbit/s and 3 Mbit/s, respectively.
  • Page 28 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth BR/EDR Table 2-16: ACL packets - enhanced rate Type Payload User Payload Slot number Header (bytes) (bytes) 2-DH1 0-54 2-DH3 0-367 2-DH5 0-679 Yes, 16-bit 3-DH1 0-83 3-DH3 0-552 2-DH5 0-1021 Figure 2-10: Packet structure of ACL packets - enhanced data rate 2.4.1.2...
  • Page 29 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth BR/EDR Table 2-18: eSCO packets - basic rate Type Payload User Payload Slot number Header (bytes) (bytes) 1-30 n.a. Yes, 16-bit 1-120 1-180 (Data only) Figure 2-13: Packet structure eSCO packets - basic rate...
  • Page 30 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth BR/EDR Table 2-21: Common link control packets: packet structure Packet Type ID Packet Types NULL and PULL Packet Types FHS 2.4.2 Bluetooth transport modes There are three different transport modes defined in the Bluetooth core specification, each of them with special applications: ●...
  • Page 31 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth BR/EDR Table 2-22: The access code fields Field Description Packets Preamble A fixed zero-one pattern of 4 symbols, used to facili- All packets tate DC compensation Sync word A 64-bit code word derived from a 24-bit address,...
  • Page 32 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth BR/EDR Synchronous data fields Asynchronous data fields Synchronous and asynchronous data fields The meaning of some payload fields is given in the table below. Table 2-24: The payload fields Field Description...
  • Page 33 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth BR/EDR Table 2-25: The payload fields for the FHS packet Field Description Parity bits Form the first part of the sync word of the access code of the device that sends the FHS...
  • Page 34 ® About the Bluetooth options R&S SMM-K60/-K117/-K178 About Bluetooth BR/EDR Table 2-26: The modulation types and corresponding packet types Modulation type Packet types GFSK ID, NULL, POLL, FHS, DM1, DH1, DM3, DH3, DM5, DH5, AUX1, HV1, HV2, HV3, DV, EV3, EV4, EV5 GFSK + π/4-DQPSK...
  • Page 35 ® Bluetooth general settings R&S SMM-K60/-K117/-K178 3 Bluetooth general settings Access: ► Select "Baseband" > "Bluetooth". The tab provides general settings to call default settings and the "Save"/"Recall" settings. Also, it provides Bluetooth version information, Bluetooth mode settings and access to further settings.
  • Page 36 Bluetooth general settings R&S SMM-K60/-K117/-K178 Parameter Value State Not affected by "Set To default" Bluetooth version R&S SMM-K60: 4.2 R&S SMM-K117: 5.4 R&S SMM-K178: 5.4 + Channel Sounding Bluetooth mode Basic Rate + EDR Transport mode ACL(Asynchronous)+EDR Packet type Sequence length...
  • Page 37 ® Bluetooth general settings R&S SMM-K60/-K117/-K178 Remote command: on page 165 [:SOURce<hw>]:BB:BTOoth:WAVeform:CREate Bluetooth Version Displays the version of the standard that the firmware supports. The displayed version for Bluetooth wireless technology depends on installed options. For example, "Bluetooth Version" > "5.4" requires R&S SMM-K117.
  • Page 38 ® Bluetooth general settings R&S SMM-K60/-K117/-K178 The button also displays configured filters and the clipping state. Chapter 7.1, "Filter/clipping settings", on page 142. Remote command: on page 281 [:SOURce<hw>]:BB:BTOoth:FILTer:FILTers? on page 281 [:SOURce<hw>]:BB:BTOoth:CLIPping:STATe Power Ramping Opens a dialog to configure the power ramping.
  • Page 39 ® Dirty transmitter test settings R&S SMM-K60/-K117/-K178 4 Dirty transmitter test settings Access: 1. Select "Bluetooth" > "General". 2. Select "Dirty Transmitter Test". The dialog provides settings to configure dirty transmitter test settings. These set- tings contain parameters that you can change for the central device signal. It is used to test the connection under 'dirty transmitter' conditions, and to define the influence on the receiver quality (bit error rate tests).
  • Page 40 ® Dirty transmitter test settings R&S SMM-K60/-K117/-K178 Table 4-2: Dirty transmitter test parameters for EDR Δt /ppm offset error Table 4-3: Dirty transmitter test parameters for LE Δt /ppm offset error standard stable 0.45 0.495 0.48 0.498 0.46 0.496 0.52 0.502...
  • Page 41 ® Dirty transmitter test settings R&S SMM-K60/-K117/-K178 Dirty Transmitter Test Enables the dirty transmitter test. The setting is available for the following packet types: ● BR: DH1, DH3, DH5 For basic rate packets, each enabled set of parameters in the "Dirty Transmitter Setting"...
  • Page 42 ® Dirty transmitter test settings R&S SMM-K60/-K117/-K178 A sine wave is used to drift the modulated Bluetooth signal around center frequency + carrier frequency offset. The maximum deviation reached during the drift equals the set frequency drift deviation. Remote command: on page 166 [:SOURce<hw>]:BB:BTOoth:DTTest:FDDeviation...
  • Page 43 ® Dirty transmitter test settings R&S SMM-K60/-K117/-K178 Symbol Timing Error (ppm) ← Dirty Transmitter Setting Sets the symbol timing error in ppm. The symbol timing error modifies the symbol clock frequency by the specified value. Remote command: [:SOURce<hw>]:BB:BTOoth:DTTest:TABLe:LONG:SET<ch>:STERror on page 170 [:SOURce<hw>]:BB:BTOoth:DTTest:TABLe:SHORt:SET<ch>:STERror...
  • Page 44 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Channel settings 5 Bluetooth LE configuration and settings Access: 1. Select "Baseband" > "Bluetooth". 2. Select "Bluetooth Mode" > "Bluetooth Low Energy". The remote commands required to define these settings are described in Chapter 8, "Remote control...
  • Page 45 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Channel settings The tab provides settings to configure channel settings and general packet set- tings. To display Bluetooth LE event or frame sequences Depending on the channel type packet type and packet format, the "Channel" tab dis- plays a chart at the bottom that illustrates sequences of the corresponding events or frames.
  • Page 46 Table 5-3. Table 5-1: Channel types and packet/PDU types Channel type Packet/PDU type Option Advertising ADV_IND, ADV_DIRECT_IND, ADV_NONCONN_IND, R&S SMM-K60 ADV_SCAN_IND, SCAN_REQ, SCAN_RSP, CON- NECT_IND Advertising ADV_EXT_IND *), AUX_ADV_IND, AUX_CHAIN_IND, R&S SMM-K117 AUX_SYNC_IND, AUX_SCAN_REQ, AUX_SCAN_RSP, AUX_CONNECT_REQ, AUX_CONNECT_RSP User Manual 1179.2054.02 ─ 08...
  • Page 47 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Channel settings Channel type Packet/PDU type Option Advertising TEST PACKET R&S SMM-K60 Advertising CONTINUOUS R&S SMM-K60 Data DATA R&S SMM-K60 Data CONTROL_DATA, see Table 5-2. Table 5-2. Data TEST PACKET R&S SMM-K60...
  • Page 48 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Channel settings How to: "To display Bluetooth LE event or frame sequences" on page 45 For more information, refer to the specifications document. Remote command: on page 175 [:SOURce<hw>]:BB:BTOoth:UPTYpe Packet Format Selects the packet format that is the format according to the physical layer (PHY) that supports the packet type or PDU type.
  • Page 49 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Channel settings Bluetooth controller Channel type PDU type role Advertiser (read-only) Advertising ADV_IND, ADV_DIRECT_IND, ADV_NON- CONN_IND, ADV_SCAN_IND, SCAN_RSP, ADV_EXT_IND, AUX_ADV_IND, AUX_CHAIN_IND, AUX_SYNC_IND, AUX_SCAN_RSP, AUX_CON- NECT_RSP, TEST PACKET Scanner (read-only) Advertising SCAN_REQ, AUX_SCAN_REQ...
  • Page 50 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Channel settings Specifies the physical layer. Remote command: on page 177 [:SOURce<hw>]:BB:BTOoth:MFORmat Event Configuration/Frame Configuration Opens the "Event Configuration" dialog, if the sequence length of the packet type is expressed in events or opens the "Frame Configuration" dialog, if it is expressed in frames, see Chapter 5.2, "Advertising event and frame...
  • Page 51 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising event and frame configuration Sets the role of the Channel Sounding device. "Initiator" Channel Sounding device initiates a CS procedure. "Reflector" Channel Sounding device responds to a CS procedure. Remote command: on page 190 [:SOURce<hw>]:BB:BTOoth:CS:ROLE...
  • Page 52 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising event and frame configuration 2. Select "Event Configuration" for event-type packets or "Frame Configuration" for frame-type packets. Figure 5-1: Event configuration for an advertising channel (advertiser) Figure 5-2: Frame configuration for an advertising channel (scanner) The "Advertising Settings"...
  • Page 53 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising event and frame configuration Advertising Event Interval Requires a legacy or an extended advertising PDU, see Table 2-10. Sets the time interval between two consecutive advertising events, regarding the start- ing points.
  • Page 54 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising event and frame configuration Remote command: on page 182 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:APINterval Transmit Window Offset Requires packet type CONNECT_IND, AUX_CONNECT_REQ or AUX_CON- NECT_RSP. Displays the start point of the transmit window. For related settings, see "Transmit Win-...
  • Page 55 32-bit message integrity check (MIC field). The following table shows data packets with limited encrypting or unencrypting. All other data packets allow encrypting and unencrypting the data packet. Table 5-4: Limited data packet encryption (R&S SMM-K60) Packet type Encrypted...
  • Page 56 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising event and frame configuration "Un-encrypted" Payload data is transmitted without encoding. Example of packet type data: "Encrypted" The link layer connection runs in encrypted mode. Example of packet type data: Remote command: on page 182 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:LCMode...
  • Page 57 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising event and frame configuration 2. Select "Channel Table" The channel table displays all possible channels and their characteristics. Also you can select the channel that you want to use for the generated packets.
  • Page 58 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration 5.3 Advertising and data packet configuration Access: 1. Select "Bluetooth" > "General". 2. "Bluetooth Mode" > "Bluetooth LE". 3. In the "Channel" tab, select the channel type, for example, "Channel Type" >...
  • Page 59 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Settings: Data Whitening......................59 Access Address......................59 CRC Initial Value(hex)....................60 Data Whitening Enables data whitening. Evenly distributed white noise is ideal for the transmission and real data can be forced to look similar to white noise with different methods called "Data Whitening".
  • Page 60 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:AADDress on page 216 CRC Initial Value(hex) Requires data channel PDU or an advertising channel PDU. For an advertising chan- nel, also requires packet type CONNECT_IND or AUX_CONNECT_REQ.
  • Page 61 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration SN Start Value Requires a data channel packet that is not a test packet. Sets the sequence number of the packet. You can set this parameter for the first event.
  • Page 62 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration "Public" Allocates a unique 48-bit address to each Bluetooth LE device. Public addresses use an organizational unique identifier (OUI) obtained from the IEEE registration authority. "Random" Allocates a 48-bit random static device address to each Bluetooth LE device.
  • Page 63 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:CTIMe on page 218 CTEType Sets the type of constant tone extension. The type specifies the CTE AoA/AoD method and for AoD the length of the switching and I/Q sampling slots.
  • Page 64 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration For an overview of supported legacy advertising PDUs, see Table 2-10. Settings: Advertiser's Device Addr....................64 Target's Device Addr..................... 65 Data Source........................65 Data Length........................65 Advertiser's Device Addr Sets the 48-bit device address of the advertiser.
  • Page 65 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ANUap on page 225 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ALAP on page 224 Target's Device Addr TargetA field of the device address that is a scanner's device address or an initiator's device address.
  • Page 66 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:DLENgth on page 230 5.3.5 Extended advertising PDU payload settings Option: R&S SMM-K117 Access: 1. Select an extended advertising PDU: a) In the "Channel" tab, select "Channel Type" > "Advertising".
  • Page 67 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration The tab provides general settings to configure the payload of the extended adver- tising PDUs. Advertising Mode......................67 Extended Header......................67 Data Source........................67 Data Length........................67 Advertising Mode Selects the mode of the advertisement in the AdvMode field.
  • Page 68 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration If enabled, the R&S SMM100A signals the extended header for extended advertis- ing PDUs. The "Extended Header" table provides general settings to configure the extended header. It also provides access to further settings of fields within the extended header.
  • Page 69 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Selecting "Conf" opens the CTEInfo configuration dialog to define the CTE length and the CTE method for direction finding. See Chapter 5.3.3, "CTEInfo settings", on page 62.
  • Page 70 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration ACAD Length Specifies the length of an additional controller advertising data (ACAD) field. Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ALENgth on page 224 ACAD Sets the pattern for additional controller advertising data (ACAD).
  • Page 71 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration 5.3.5.3 AdvDataInfo configuration settings Access: 1. Select "Payload" > "Extended Header". 2. Select "AdvDataInfo" > "On". 3. Select "AdvDataInfo" > "Conf". The "AdvDataInfo Configuration" section opens. The section provides AdvDataInfo field settings and displays the structure of the field graphically.
  • Page 72 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration The "AuxPtr Configuration" dialog opens. The "AuxPtr Configuration" tab provides AuxPtr field settings and displays the structure of the field graphically. The "Secondary Advertising Channel Table" tab lists the configuration of all 37 LE channels and allows you to enable the channel that you want to use for secondary advertising.
  • Page 73 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:APHY on page 226 5.3.5.5 SyncInfo configuration settings Access: 1. Select "Payload" > "Extended Header". 2. Select "SyncInfo" > "On". 3. Select "SyncInfo" > "Conf".
  • Page 74 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SPOFfset on page 243 Offset Units Sets the offset units of the sync packet offset, see "Sync Packet Offset" on page 73. Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SOUNits...
  • Page 75 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration 2. Select "Event Configuration"/"Frame Configuration" > "Packet Configuration". 3. Select "Payload". The tab provides settings to configure the payload of the scanning PDUs. For an overview of supported scanning PDUs, see Table 2-10.
  • Page 76 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Extended Header Requires an AUX_SCAN_RSP PDU. For related settings, see "Extended Header" on page 67 and Chapter 5.3.5.2, "Exten- ded header settings", on page 67. 5.3.7 Initiating PDU payload settings Access: 1.
  • Page 77 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Data Source........................79 Data Length........................79 Extended Header......................79 Initiator's Device Addr Sets the 48-bit device address of the initiator. For more information, see "Advertiser's Device Addr" on page 64.
  • Page 78 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Remote command: For advertising channels: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:WOFFset on page 245 For data channels: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:NWOFfset on page 239 Connection Event Interval Requires packet type CONNECT_IND, AUX_CONNECT_REQ, LL_CONNEC- TION_UPDATE_IND, LL_CONNECTION_PARAM_REQ or LL_CONNEC- TION_PARAM_REQ.
  • Page 79 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Show Data Channel Map Table/Hide Data Channel Map Table Requires packet type CONNECT_IND or LL_CHANNEL_MAP_IND. Shows or hides the data channel map table. For related settings, see Chapter 5.2.3,...
  • Page 80 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration 2. Select "Event Configuration" for event-type packets or "Frame Configuration" for frame-type packets. The "Event Configuration" or "Frame Configuration" dialog opens. 3. Select "Packet Configuration" The dialog provides settings to configure the payload of advertising PDUs.
  • Page 81 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Min Used Channels.......................87 ID(hex).......................... 87 SyncInfo Configuration....................87 Connection Event Count....................87 Last Pa Event Counter....................88 SID(hex)........................88 Address Type........................ 88 Sleep Clock Accuracy....................88 PHY..........................88 Advertiser's Device Addr....................
  • Page 82 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Connection Instant Requires packet type LL_CONNECTION_UPDATE_IND, LL_CHANNEL_MAP_IND or LL_PHY_UPDATE_IND. The PDU LL_PHY_UPDATE_IND also requires option R&S SMM-K117. Sets a connection instant for indicating the connection event at which the new connec- tion parameters are taken in use.
  • Page 83 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration: on page 231 EDIVersifier Session Key iD(hex) Requires the packet type LL_ENC_REQ and a Central Bluetooth controller or LL_ENC_RSP and a Peripheral Bluetooth controller.
  • Page 84 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Sets the version of the Bluetooth controller. It is an 8-bit value in hexadecimal repre- sentation. Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:VNUMber on page 245 SubVersion Number(hex) Requires packet type LL_VERSION_IND.
  • Page 85 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Ref. Connection Event Count Requires option R&S SMM-K117 and packet types LL_CONNECTION_PARAM_REQ or LL_CONNECTION_PARAM_RSP. Sets connection event counter relative to the calculation of all valid offset fields Offset0 to Offset5.
  • Page 86 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MROCtets on page 235 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MTOCtets on page 235 MaxRxTime/MaxTxTime Requires option R&S SMM-K117 and packet types LL_LENGTH_REQ or LL_LENGTH_RSP. Sets the maximum allowed time to receive (RX) a packet or to transmit (TX) a packet.
  • Page 87 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:STMPhy: on page 237 L1M:STATe [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:STMPhy: on page 237 L2M:STATe [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:STMPhy: on page 237 LCOD:STATe PHYs Requires option R&S SMM-K117 and packet type LL_MIN_USED_CHANNELS_IND. Sets the physical layers for which the Peripheral device has a minimum used channels requirement.
  • Page 88 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:CECount on page 246 Last Pa Event Counter Requires option R&S SMM-K117 and packet type LL_PERIODIC_SYNC_IND. Sets the lastPaEventCounter field in the CtrData field. The lastPaEventCounter value is typically equal to the PaEventCounter value in the AUX_SYNC_IND PDU.
  • Page 89 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHY:L1M: on page 247 STATe [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHY:L2M: on page 247 STATe [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHY:LCOD: on page 248 STATe Advertiser's Device Addr Requires option R&S SMM-K117 and packet type LL_PERIODIC_SYNC_IND.
  • Page 90 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Advertising and data packet configuration a) Select "Bluetooth Controller Role" > "Central". b) Select "Packet Type" > "LL_FEATURE_REQ" or "LL_PERIPHERAL_FEA- TURE_REQ". 4. For a peripheral controller, proceed as follows: a) Select "Bluetooth Controller Role" > "Peripheral".
  • Page 91 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration Link layer feature Link layer feature LE extended advertising Sleep clock accuracy updates LE periodic advertising Remote public key validation Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration: on page 233 FSBit<ch0>:STATe 5.4 CS subevent configuration Option: R&S SMM-K178...
  • Page 92 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration 2. Select "Subevent Settings". The tab provides settings to configure subevent settings. Settings: Subevent Length......................92 Subevent Interval......................92 Step Scheduling......................93 Number of Subevents....................93 Subevent table......................93 Subevent........................
  • Page 93 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration Step Scheduling Sets the CS step scheduling mode. "Auto" Automatic CS step scheduling. The subevent length, the subevent interval and the number of subevents are configurable. The number of CS steps is 2.
  • Page 94 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration ● "CS Step Info" on page 94 Subevent Displays the subevent number "Subevent x" within a subevent interval. "x" ranges from 0 to 31 depending on the number of subevents, see "Number of Subevents"...
  • Page 95 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration 5.4.2 Channel table Access: 1. Select "CS Subevent Configuration". 2. Select "Channel Table". The tab lists general settings for all 78 Bluetooth LE channels in a table. Settings: Channel.........................95 Center Frequency (MHz)....................95...
  • Page 96 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration Channel Index Displays the channel index of the channel. See also Table 2-13. Remote command: [:SOURce<hw>]:BB:BTOoth:CS:CTABle[:CHANnel<ch0>]:CINDex? on page 204 Channel Type Displays the channel type that is Channel Sounding for all channels.
  • Page 97 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration Settings: CS_IV_C(hex)....................... 97 CS_IV_P(hex)....................... 97 CS_IN_C(hex).......................97 CS_IN_P(hex)....................... 97 CS_PV_C(hex)......................97 CS_PV_P(hex)......................97 CS_IV_C(hex) Requires packet type CS SEQUENCE or LL_CS_SEC_REQ. Sets the CS_IV_C parameter. The parameter is 64-bit in hexadecimal representation.
  • Page 98 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration 5.4.4 Channel selection settings Access: 1. Select "CS Subevent Configuration". 2. Select "Channel Selection". The tab provides settings to configure channel selection. Settings: CSFilteredChM(hex)..................... 98 ChM_Repetition......................98 ChSel..........................98 Ch3cShape........................
  • Page 99 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration "Algorithm #3c" Sets for Algorithm #3c channel selection algorithm. Table 5-7: Algorithm #3c parameters CSChannelJump seq1StartCh seq2StartCh maxRepsAllowed saltRate Remote command: on page 208 [:SOURce<hw>]:BB:BTOoth:CS:CSEL Ch3cShape Requires "ChSel" > "Algorithm #3c".
  • Page 100 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration The "CS Step Config" tab of the "Structure for Subevent x" dialog opens. The tab provides CS step settings for the first subevent "Subevent 0". If configured, all following subevents share CS step configuration as subevent 0.
  • Page 101 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration Table 5-8: CS step main modes and submodes "Main_Mode" "Sub_Mode" "Mode-1" "None" "Mode-2" "None", "Mode-1", "Mode-3" "Mode-3" "None", "Mode-2" Remote command: on page 194 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:MMODe Sub_Mode Sets the submode of the main mode.
  • Page 102 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration 5.4.5.2 Mode-0 config settings Access: ► Select "CS Step Config" > "Mode-0 Config". The tab provides Mode-0 CS step settings. Settings: T_IP1 Sets the time "T_IP1" for Mode-0 CS steps.
  • Page 103 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration ● Select "Main_Mode" > "Mode-2" and "Sub_Mode" > "Mode-1". The tab provides Mode-1 CS step settings. Settings: T_IP1...........................103 Sequence Length......................103 Sequence Type......................103 User Payload Pattern....................104 Select Data List......................
  • Page 104 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration User Payload Pattern Displaying the parameter "User Payload Pattern" requires the following: ● "Packet Type" > "TEST PACKET". ● "Main_Mode" > "Mode-1" or "Mode-3". "Sub_Mode" > "Mode-1" or "Mode-3".
  • Page 105 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration ● Select "Main_Mode" > "Mode-3" and "Sub_Mode" > "Mode-2". The tab provides Mode-2 CS step settings. Settings: T_SW.......................... 105 N_AP...........................105 T_PM...........................105 T_IP2...........................105 T_SW Sets the time "T_SW" for Mode-2.
  • Page 106 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration 5.4.5.5 Mode-3 config settings Access: 1. Select "CS Step Config" > "General". 2. Select Mode-3 in the CS step main mode or submode: ● Select "Main_Mode" > "Mode-3". ●...
  • Page 107 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration Remote command: on page 197 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:MTHRee:TPM T_IP2 Sets the time "T_IP2" for Mode-3. Remote command: on page 198 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:MTHRee:TIPT Sequence Length Sets the sequence length. The length is discrete and depends on the sequence type.
  • Page 108 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration Remote command: on page 199 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:UPPattern Select Data List Requires "User Payload Pattern" > "Use CS_SYNC_User_Payload". "Data Source" on page 65. Remote command: on page 198 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:UPAYload 5.4.6 CS step info Access: 1.
  • Page 109 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration Sounding Sequence Content/Random Sequence Content......... 110 Companion Signal....................... 110 CS Tone Ext.........................111 Step Displays the number of the CS step "Step x". "x" depends on the number of main mode steps, see "Main_Mode_Steps"...
  • Page 110 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS subevent configuration See also Table 2-13. Remote command: [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>][:STEP<st0>]:CINDex on page 201 CS Access Address Sets or displays the 32-bit CS access address for individual CS steps. Setting the address requires "Step Scheduling" > "Manual"...
  • Page 111 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings Requires "Companion Signal" ≠ "None". "Data Source" Selects the data source. The following standard data sources are available: ● "All 0"/"All 1" An internally generated sequence containing 0 data or 1 data.
  • Page 112 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings Access: 1. Select "Packet Configuration". 2. Select "Payload". The tab provides settings to configure the packet/PDU payload. ● CS security payload settings................. 112 ● CS capabilities payload settings................112...
  • Page 113 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings Settings: ● CpbData 1 settings....................113 ● CpbData 2 settings....................115 ● CpbData 3 settings....................116 5.5.2.1 CpbData 1 settings Mode_Types........................113 RTT_Capability......................113 RTT_AA_Only......................113 RTT_Sounding_N......................114 RTT_Random_Sequence_N..................114 NADM_Sounding_Capability..................114 NADM_Random_Sequence_Capability..............114 CS_SYNC_PHY_Capability..................
  • Page 114 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings RTT_Sounding_N Displays or sets the time values of the RTT_Sounding_N field. Setting the value depends on the bits of the RTT_Capability field. See the table Table 5-9 for an overview.
  • Page 115 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings Role "Role" on page 50. Companion_Signal Enables the companion signal. See also "Companion Signal" on page 110. Remote command: on page 255 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CSIGnal 5.5.2.2 CpbData 2 settings No_FAE........................
  • Page 116 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings Sets the bits that are reserved for future use (RFU). The number of RFU bits can vary depending on the CS_Control_Data PDU. Remote command: on page 262 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:RFU...
  • Page 117 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings "T_IP1" Displays the T_IP1 time of the bit position. "T_IP1 Capability" Enables the T_IP1 capability per bit position. Remote command: [:SOURce<hw>]:BB:BTOoth:CS:CDATa[:BPOSition<ch0>]:TIPO: on page 252 CAPability Show T_IP2 Capability Table/Hide T_IP2 Capability Table Shows or hides the "T_IP2_Capability Table".
  • Page 118 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings T_PM_Capability Table The table provides settings to enable the T_PM capability including the T_PM time per bit position. You can enable T_PM capabilities for bit position 0 to bit position 2.
  • Page 119 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings ChM_Repetition Sets the 3-bit ChM_Repetition field. The value equals the number of cycles of the ChM field for non-Mode-0 CS steps within a CS procedure. Remote command: on page 208 [:SOURce<hw>]:BB:BTOoth:CS:CMRepetition...
  • Page 120 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings This value indicates the TX PHY of the remote device, to which the Pwr_Delta field in this PDU applies. See also "Packet Format" on page 48. Remote command: on page 260 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:PHY?
  • Page 121 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings Sets the bits that are reserved for future use (RFU). The number of RFU bits can vary depending on the CS_Control_Data PDU. Remote command: on page 262 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:RFU...
  • Page 122 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings Settings: Config_ID........................122 RFU..........................122 connEventCount......................122 Offset_Min........................122 Offset_Max........................123 Max_Procedure_Len....................123 Event_Interval......................123 Subevent_Per_Event....................123 Subevent_Interval....................... 123 Subevent_Len......................124 Procedure_Interval......................124 Procedure_Count......................124 ACI..........................124 PHY..........................124 Preferred_Peer_Ant....................124 Pwr_Delta........................125 Config_ID Sets the 6-bit Config_ID field that is the CS configuration ID. Settable ID values are 2 bits in decimal representation.
  • Page 123 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings The Offset_Min time value is greater than or equal to 500 μs and less than 4 s. Remote command: on page 259 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:OMIN Offset_Max Sets the time value of the Offset_Max field. The value has a length of 3 octets or 9 bits.
  • Page 124 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings Subevent_Len Sets the subevent length in the Subevent_Len field. The value has a length of 3 octets or 9 bits. The Subevent_Len field implies the maximum duration of each CS subevent in micro- seconds.
  • Page 125 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings Table 5-11: Preferred_Peer_Ant field values Bit number Description <PrePeerAnt> Use the first ordered antenna element ANT0 Use the second ordered antenna element ANT1 Use the third ordered antenna element...
  • Page 126 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings Remote command: on page 254 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CID Sets the bits that are reserved for future use (RFU). The number of RFU bits can vary depending on the CS_Control_Data PDU.
  • Page 127 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 CS control data payload settings Remote command: on page 253 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:ACI Displays the LE physical layer that is the LE uncoded PHY LE1M. See also "Packet Format" on page 48. Remote command: on page 174 [:SOURce<hw>]:BB:BTOoth:PFORmat...
  • Page 128 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Test packet configuration Settings: Show Channel FAE Table/Hide Channel FAE Table........... 128 Channel FAE Table..................... 128 Show Channel FAE Table/Hide Channel FAE Table Shows or hides the fractional frequency offset actuation error (FAE) channel table.
  • Page 129 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Test packet configuration 3. Select "Channel" > "Packet Type" > "TEST PACKET". 4. Select "Test Packet Configuration". The dialog provides settings to configure test packets. The graphic below the set- tings shows the test packet structure and fields.
  • Page 130 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Test packet configuration Remote command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SPBit on page 267 Header The "Header" section provides settings to configure the header of the test packet. CTEInfo Present Requires a data channel packet or a test packet.
  • Page 131 ® Bluetooth LE configuration and settings R&S SMM-K60/-K117/-K178 Test packet configuration Predefined pattern 11110000, 10101010, 11111111, 00000000, 00001111 or 01010101 "Data List" "Data Source" on page 65. Remote command: [:SOURce<hw>]:BB:BTOoth:DTTest:TPConfiguration:UPSource on page 269 Payload Length Sets the payload length of the test packet.
  • Page 132 ® Bluetooth BR/EDR configuration and settings R&S SMM-K60/-K117/-K178 Channel settings 6 Bluetooth BR/EDR configuration and set- tings Access: 1. Select "Baseband" > "Bluetooth". 2. Select "Bluetooth Mode" > "Basic Rate + EDR". The remote commands required to define these settings are described in Chapter 8, "Remote control...
  • Page 133 ® Bluetooth BR/EDR configuration and settings R&S SMM-K60/-K117/-K178 Channel settings For Bluetooth LE channel settings, see Chapter 5.1, "Channel settings", on page 44. Settings: Packet Type........................ 133 Sequence Length......................133 Slot Timing........................133 Packet Configuration....................134 Packet Type Selects the packet type.
  • Page 134 ® Bluetooth BR/EDR configuration and settings R&S SMM-K60/-K117/-K178 Packet configuration Packet Configuration Access the "Packet Configuration" dialog, see Chapter 6.2, "Packet configuration", on page 134. The current data source for the packet and the data whitening state are displayed next to the button.
  • Page 135 ® Bluetooth BR/EDR configuration and settings R&S SMM-K60/-K117/-K178 Packet configuration └ Acknowledgment...................137 └ SEQN Start Value..................137 Payload........................137 └ Data Source....................137 └ Data Length....................138 └ EIR packet follows..................138 └ Flow Control....................138 └ Scan Repetition Mode...................139 └...
  • Page 136 ® Bluetooth BR/EDR configuration and settings R&S SMM-K60/-K117/-K178 Packet configuration Sets the 24-bit lower address part (LAP) in the 64-bit sync word separately, if "Syn- chronize LAP with BD_ADDR > OFF". The LAP is obtained automatically from the Bluetooth device address "BD_ADDR >...
  • Page 137 ® Bluetooth BR/EDR configuration and settings R&S SMM-K60/-K117/-K178 Packet configuration Sets the FLOW bit in the header. This bit indicates the start or stop of transmission of packets over the ACL logical transport. "Go" Allows the other devices to transmit new data.
  • Page 138 ® Bluetooth BR/EDR configuration and settings R&S SMM-K60/-K117/-K178 Packet configuration ● "PNxx" An internally generated pseudo-random noise sequence. ● "Pattern" An internally generated sequence according to a bit pattern. Use the "Pattern" box to set the bit pattern. ● "Data List"/"Select Data List"...
  • Page 139 ® Bluetooth BR/EDR configuration and settings R&S SMM-K60/-K117/-K178 Packet configuration Remote command: on page 278 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:PFControl Scan Repetition Mode ← Payload Available for FHS packets. The 2-bit scan repetition field indicates the interval between two consecutive page scan windows, determines the behavior of the paging device.
  • Page 140 ® Bluetooth BR/EDR configuration and settings R&S SMM-K60/-K117/-K178 Packet configuration An internally generated pseudo-random noise sequence. ● "Pattern" An internally generated sequence according to a bit pattern. Use the "Pattern" box to set the bit pattern. ● "Data List"/"Select Data List"...
  • Page 141 ® Bluetooth BR/EDR configuration and settings R&S SMM-K60/-K117/-K178 Packet configuration Remote command: on page 273 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DATA on page 273 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DATA:DPATtern on page 274 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DATA:DSELection Data Length ← DV Payload (Available for all packet types except ID, POLL, NULL and FHS packets) Enters the payload data length in bytes.
  • Page 142 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Filter/clipping settings 7 Signal control and signal characteristics This section lists settings provided for configuring the baseband filter and configuring power ramping of bluetooth bursts. Also settings are listed for defining the signal gen- eration start and for generating signals necessary for synchronization with other instru- ments.
  • Page 143 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Filter/clipping settings Settings: 7.1.1 Common filter settings....................143 7.1.2 DPSK filter settings..................... 144 7.1.3 Modulation settings..................... 145 7.1.4 Clipping settings......................147 7.1.1 Common filter settings Access: 1. Select "General" > "Filter"/"Clipping". 2. Select "Filter" > "GFSK section".
  • Page 144 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Filter/clipping settings on page 285 [:SOURce<hw>]:BB:BTOoth:FILTer:PARameter:GAUSs on page 285 [:SOURce<hw>]:BB:BTOoth:FILTer:PARameter:LPASs on page 286 [:SOURce<hw>]:BB:BTOoth:FILTer:PARameter:PGAuss on page 286 [:SOURce<hw>]:BB:BTOoth:FILTer:PARameter:RCOSine on page 286 [:SOURce<hw>]:BB:BTOoth:FILTer:PARameter:SPHase Impulse Length Displays the number of filter tabs. If enabled, the most sensible parameter values are selected. The value depends on the coherence check.
  • Page 145 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Filter/clipping settings Table 7-1: DPSK filter for Bluetooth EDR packets Transport mode Packet type DPSK filter type ACL+EDR 2-DH1, 2-DH3, 2-DH5 π/4 DQPSK 3-DH1, 3-DH3, 3-DH5 8DPSK eSCO+EDR 2-EV3, 2-EV5 π/4 DQPSK...
  • Page 146 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Filter/clipping settings 2. Select "Modulation Settings". The tab provides settings to configure modulation settings. Settings: Modulation Type......................146 Frequency Deviation....................146 Modulation Index......................146 Symbol Rate Variation....................147 Modulation Type Displays the modulation format used for the current packet selection.
  • Page 147 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Filter/clipping settings Symbol Rate Variation Enter the symbol rate. Remote command: on page 287 [:SOURce<hw>]:BB:BTOoth:SRATe:VARiation 7.1.4 Clipping settings Access: 1. Select "General" > "Filter"/"Clipping". 2. Select "Clipping". The tab provides settings to configure clipping.
  • Page 148 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Power ramping settings Clipping Mode Selects the clipping method. The dialog displays a graphical illustration on how this two methods work. ● "Vector | i + jq |" The limit is related to the amplitude | i + q |. The I and Q components are mapped together, the angle is retained.
  • Page 149 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Power ramping settings Settings: Ramp Function......................149 Ramp Time........................149 Rise Offset........................149 Fall Offset........................149 Ramp Function Selects the form of the transmitted power, i.e. the shape of the rising and falling edges during power ramp control.
  • Page 150 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Trigger settings 7.3 Trigger settings Access: ► Select "Baseband" > "Bluetooth" > "Trigger In". This tab provides settings to select and configure the trigger, like trigger source, trigger mode and trigger delays, and to arm or trigger an internal trigger manually.
  • Page 151 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Trigger settings Execute Trigger......................152 Source.........................153 Sync. Output to Ext. Trigger/Sync. Output to Trigger..........153 External Inhibit/Trigger Inhibit..................154 External Delay/Trigger Delay..................154 Mode Selects the trigger mode. The mode determines the effect of a trigger event on the sig- nal generation.
  • Page 152 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Trigger settings Running/Stopped With enabled modulation, displays the status of signal generation for all trigger modes. ● "Running" The signal is generated; a trigger was (internally or externally) initiated in triggered mode.
  • Page 153 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Trigger settings Source The following sources of the trigger signal are available: ● "Internal" The trigger event is internal. Tap "Execute Trigger" to trigger signal generation manually. ● "External Global Trigger" The trigger event is the active edge of an external trigger signal provided and con- figured at the User x connectors.
  • Page 154 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Trigger settings Remote command: [:SOURce<hw>]:BB:BTOoth:TRIGger[:EXTernal]:SYNChronize:OUTPut on page 293 External Inhibit/Trigger Inhibit Applies for an external trigger signal. Sets the duration with that any following trigger event is suppressed. In "Retrigger" mode, for example, a new trigger event does not cause a restart of the signal genera- tion until the specified inhibit duration does not expire.
  • Page 155 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Marker settings 7.4 Marker settings Access: ► Select "Baseband" > "Bluetooth" > "Marker". This tab provides settings to select and configure the marker output signal includ- ing marker mode and marker delay.
  • Page 156 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Marker settings "Event/Frame Start" A marker signal is generated at the start of each event/frame. The term event corresponds to a Bluetooth LE event, the term frame cor- responds to a Bluetooth BR/EDR frame.
  • Page 157 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Clock settings "On/Off Ratio" A regular marker signal that is defined by an on/off ratio is generated. A period lasts one On and Off cycle. If "Marker Mode > On/Off Ratio", specify the "On Time" and "Off Time", which are expressed as the number of samples.
  • Page 158 ® Signal control and signal characteristics R&S SMM-K60/-K117/-K178 Local and global connectors settings 3. Activate baseband signal generation. In the block diagram, set "Baseband" > "On". The R&S SMM100A starts baseband signal generation with a symbol rate that equals the clock rate.
  • Page 159 The commands *RST and SYSTem:PRESet are equiva- lent for this purpose. *CLS also resets the status registers and clears the output buffer. The following chapters describe the commands specific to the Bluetooth options R&S SMM-K60, R&S SMM-K117 and R&S SMM-K178. ● General commands....................160...
  • Page 160 ® Remote control commands R&S SMM-K60/-K117/-K178 General commands ● Trigger commands....................289 ● Marker commands....................294 ● Clock commands....................298 8.1 General commands Example: To configure time units for timing and delay commands The default time unit of timing and delay commands is millisecond. You can set time unit to millisecond or to second.
  • Page 161 ® Remote control commands R&S SMM-K60/-K117/-K178 General commands Example: To configure general Bluetooth LE settings // ****************************************************************** // Set time unit to ms. // ****************************************************************** :SOURce1:BB:BTOoth:UNIT:TIME MS // ****************************************************************** // Set frequency and level. // Set LE PHY and query the version of the digital standard.
  • Page 162 ® Remote control commands R&S SMM-K60/-K117/-K178 General commands Scanner (only advertising channel type) SCAN_REQ, SCAN_RSP Within R&S SMM-K117 also AUX_SCAN_REQ, AUX_SCAN_RSP Initiator (only advertising channel type) CONNECT_IND Within R&S SMM-K117 also AUX_CONNECT_REQ, AUX_CONNECT_RSP Example: Example "To configure general Bluetooth BR/EDR settings"...
  • Page 163 ® Remote control commands R&S SMM-K60/-K117/-K178 General commands [:SOURce<hw>]:BB:BTOoth:SETTing:CATalog <Catalog> Queries the files with settings in the default directory. Listed are files with the file exten- sion *.bto. Parameters: <Catalog> string Returns a string of file names separated by commas.
  • Page 164 ® Remote control commands R&S SMM-K60/-K117/-K178 General commands [:SOURce<hw>]:BB:BTOoth:STATe <State> Activates the standard and deactivates all the other digital standards and digital modu- lation modes in the same path. Parameters: <State> 1 | ON | 0 | OFF *RST: Example: Example "To configure general Bluetooth BR/EDR settings"...
  • Page 165 ® Remote control commands R&S SMM-K60/-K117/-K178 Dirty transmitter configuration Return values: <Version> string Example: Example "To configure general Bluetooth BR/EDR settings" on page 160. Usage: Query only Options: Version 5.x requires R&S SMM-K117. Version 5.5 requires R&S SMM-K178. Manual operation: "Bluetooth Version"...
  • Page 166 ® Remote control commands R&S SMM-K60/-K117/-K178 Dirty transmitter configuration SOURce1:BB:BTOoth:DTTest:TABLe:LONG:SET3:STATe 1 SOURce1:BB:BTOoth:DTTest:TABLe:LONG:SET4:STATe 1 SOURce1:BB:BTOoth:DTTest:TABLe:LONG:SET5:STATe 1 SOURce1:BB:BTOoth:DTTest:TABLe:LONG:SET6:STATe 1 SOURce1:BB:BTOoth:DTTest:TABLe:LONG:SET7:STATe 1 SOURce1:BB:BTOoth:DTTest:TABLe:LONG:SET8:STATe 1 SOURce1:BB:BTOoth:DTTest:TABLe:LONG:SET9:STATe 1 SOURce1:BB:BTOoth:DTTest:TABLe:LONG:SET10:STATe 1 // ****************************************************************** // Enable dirty transmitter. // ****************************************************************** SOURce1:BB:BTOoth:DTTest:DTTState 1 ..............166 [:SOURce<hw>]:BB:BTOoth:DTTest:DTTState ..............166 [:SOURce<hw>]:BB:BTOoth:DTTest:FDDeviation ..............167 [:SOURce<hw>]:BB:BTOoth:DTTest:FDRate...
  • Page 167 ® Remote control commands R&S SMM-K60/-K117/-K178 Dirty transmitter configuration Parameters: <FdDeviation> integer Range: -100 to 100 *RST: Example: Example "To configure a dirty transmitter" on page 165. Manual operation: "Frequency Drift Deviation(+/-)" on page 41 [:SOURce<hw>]:BB:BTOoth:DTTest:FDRate <FdRate> Sets a frequency drift rate.
  • Page 168 ® Remote control commands R&S SMM-K60/-K117/-K178 Dirty transmitter configuration Parameters: <NumPack> NP50 | NP2 | NP1 | NP4 | NP6 | NP8 | NP10 | NP12 | NP14 | NP16 | NP18 | NP20 *RST: NP50 Example: Example "To configure a dirty transmitter"...
  • Page 169 ® Remote control commands R&S SMM-K60/-K117/-K178 Dirty transmitter configuration Example: SOURce1:BB:BTO:PTYP DH1 calls the default settings. SOURce1:BB:BTO:DTT:TABL LONG See also Example "To configure a dirty transmitter" on page 165. Example: calls the default settings. [:SOURce<hw>]:BB:BTOoth:DTTest:TABLe:LONG:SET<ch>:CFOFfset <CfOffset> Sets a carrier frequency offset.
  • Page 170 ® Remote control commands R&S SMM-K60/-K117/-K178 Dirty transmitter configuration Parameters: <MIndex> float Range: 0.28 to 0.55 Increment: 0.01 *RST: 0.28 Example: SOURce1:BB:BTO:PTYP DH1 sets the packet type. SOURce1:BB:BTO:DTT:TABL LONG enters the table type SOURce1:BB:BTO:DTT:TABL:LONG:SET2:MIND 0.3 enters a modulation index. Example: See also Example "To configure a dirty transmitter"...
  • Page 171 ® Remote control commands R&S SMM-K60/-K117/-K178 Dirty transmitter configuration Example: SOURce1:BB:BTO:PTYP DH1 sets the packet type. SOURce1:BB:BTO:DTT:TABL LONG sets the table type SOURce1:BB:BTO:DTT:TABL:LONG:SET2:STER -20 sets a symbol timing error. Example: See also Example "To configure a dirty transmitter" on page 165.
  • Page 172 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel configuration commands - LE Manual operation: "State" on page 42 [:SOURce<hw>]:BB:BTOoth:DTTest:TABLe:SHORt:SET<ch>:STERror <StError> Sets a symbol timing error in ppm. The symbol timing error modifies the symbol clock frequency by the set amount. Parameters: <StError>...
  • Page 173 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel configuration commands - LE SOURce1:BB:BTOoth:UPTYpe ADIN SOURce1:BB:BTOoth:DCYCle LOW ................173 [:SOURce<hw>]:BB:BTOoth:BCRole ............... 173 [:SOURce<hw>]:BB:BTOoth:CCRC:STATe ................174 [:SOURce<hw>]:BB:BTOoth:CTYPe ................174 [:SOURce<hw>]:BB:BTOoth:DCYCle ................174 [:SOURce<hw>]:BB:BTOoth:PFORmat ................175 [:SOURce<hw>]:BB:BTOoth:UPTYpe ................177 [:SOURce<hw>]:BB:BTOoth:USLength ................177 [:SOURce<hw>]:BB:BTOoth:MFORmat ................178 [:SOURce<hw>]:BB:BTOoth:DURation [:SOURce<hw>]:BB:BTOoth:BCRole <BcRole>...
  • Page 174 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel configuration commands - LE [:SOURce<hw>]:BB:BTOoth:CTYPe <CType> Determines the channel type. Advertising and data are available. Parameters: <CType> ADVertising | DATA | | CS ADVertising Selects channel type advertising. DATA Selects channel type data. Devices in a connected state transmit data channel packets in connection events with a start point and an interval.
  • Page 175 127 [:SOURce<hw>]:BB:BTOoth:UPTYpe <UpType> Selects the packet type. The available packets depend on the selected channel type and installed options. The tables below provide an overview. Table 8-1: R&S SMM-K60 packet/PDU types <UpType> Packet/PDU type <UpType> Packet/PDU type AIND...
  • Page 176 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel configuration commands - LE Table 8-2: R&S SMM-K117 packet/PDU types <UpType> Packet/PDU type <UpType> Packet/PDU type PREQ LL_PHY_REQ ACINd AUX_CHAIN_IND PRSP LL_PHY_RSP ASINd AUX_SYNC_IND PUIN LL_PHY_UPDATE_IND ASReq AUX_SCAN_REQ LREQ LL_LENGTH_REQ ASPSp AUX_SCAN_RSP LRSP...
  • Page 177 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel configuration commands - LE [:SOURce<hw>]:BB:BTOoth:USLength <UsLength> Selects the number of frames or events depending on the packet type. The signal repeats after the specified number of frames/events. For SCAN_REQ and CONNECT_IND packet, the sequence length is expressed in "Frames".
  • Page 178 ® Remote control commands R&S SMM-K60/-K117/-K178 Event and frame configuration commands - LE [:SOURce<hw>]:BB:BTOoth:DURation <Duration> Sets the transmission duration for continuous payload transmission. This transmission requires a CONTINUOUS packet: :SOURce1:BB:BTOoth:UPTYpe CONT Command sets the values in ms. Query returns values in s.
  • Page 179 ® Remote control commands R&S SMM-K60/-K117/-K178 Event and frame configuration commands - LE // ****************************************************************** SOURce1:BB:BTOoth:CTYPe ADV SOURce1:BB:BTOoth:UPTYpe SREQ SOURce1:BB:BTOoth:ECONfiguration:SWINdow 10 SOURce1:BB:BTOoth:ECONfiguration:SINTerval 3500 // ****************************************************************** // For packet type CONNECT_IND set transmit window, // start point of the transmit window, // LL connection timeout and time interval.
  • Page 180 ® Remote control commands R&S SMM-K60/-K117/-K178 Event and frame configuration commands - LE ......185 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PAINterval ......185 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PPERiodicity ......185 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:RCECount ............. 186 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PNUMber ............186 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:SDCI? ............. 186 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:SINTerval .............187 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:SWINdow ............187 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:WOINfo? ............188 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:WSINfo? [:SOURce<hw>]:BB:BTOoth:ECONfiguration:ACTable:CHANnel<ch0>:STATe <State> [:SOURce<hw>]:BB:BTOoth:ECONfiguration:DCTable:CHANnel<ch0>:STATe <State>...
  • Page 181 ® Remote control commands R&S SMM-K60/-K117/-K178 Event and frame configuration commands - LE Parameters: <AeDelay> float Range: 0 s to 10E-3 s Increment: 0.1E-3 *RST: Default unit: ms Example: SOURce1:BB:BTO:ECON:AEDelay 5 Sets a delay of 5 ms. Example: See also Example "Configure event and frame configuration set-...
  • Page 182 ® Remote control commands R&S SMM-K60/-K117/-K178 Event and frame configuration commands - LE Example: See also Example "Configure event and frame configuration set- tings" on page 178. Manual operation: "Advertising Event Interval" on page 53 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:APINterval <ApInterval> Sets the time interval between packets starting points of two consecutive packets in the advertising channel.
  • Page 183 ® Remote control commands R&S SMM-K60/-K117/-K178 Event and frame configuration commands - LE [:SOURce<hw>]:BB:BTOoth:ECONfiguration:LTKey <LtKey>, <BitCount> Indicates the time the controller needs to receive the long-term key from the host. After this time, the controller is ready to enter into the last phase of encryption mode setup.
  • Page 184 ® Remote control commands R&S SMM-K60/-K117/-K178 Event and frame configuration commands - LE Parameters: <MInterval> float Range: 7.5E-3 s to 4000E-3 s Increment: 1.25E-3 *RST: 7.5E-3 Example: SOURce1:BB:BTO:ECON:PCON:MXIN 12.5 Sets a time interval of 12.5 ms. Example: See also Example "Configure event and frame configuration set- tings"...
  • Page 185 ® Remote control commands R&S SMM-K60/-K117/-K178 Event and frame configuration commands - LE Options: R&S SMM-K117 Manual operation: "Offset Setting Table" on page 85 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PAINterval <Interval> Sets the time interval between the start of two AUX_SYNC_IND PDUs from the same advertising set.
  • Page 186 ® Remote control commands R&S SMM-K60/-K117/-K178 Event and frame configuration commands - LE Parameters: <RCECount> integer Range: 0 to 65535 *RST: Example: Example "Configure event and frame configuration settings" on page 178. Options: R&S SMM-K117 Manual operation: "Ref. Connection Event Count"...
  • Page 187 ® Remote control commands R&S SMM-K60/-K117/-K178 Event and frame configuration commands - LE Command sets the values in ms. Query returns values in s. Parameters: <SInterval> float Range: 10E-3 s to depends on oversampling and the num- ber of advertsing channel table states Increment: 0.625E-3...
  • Page 188 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE Example: SOURce1:BB:BTO:UPTY CREQ Sets packet type CONNECT_IND SOURce1:BB:BTO:ECON:PCON:WOIN? Queries the start point of the transmit window. Example: See also Example "Configure event and frame configuration set- tings" on page 178.
  • Page 189 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE 8.5.1 CS general commands Example: To configure CS sequence settings :SOURce1:BB:BTOoth:CINTerval 10 // The connection interval is 10 microseconds. :SOURce1:BB:BTOoth:EINTerval 2 // The number of event intervals is two.
  • Page 190 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE [:SOURce<hw>]:BB:BTOoth:CS:EOFFset <EventOffset> Sets the time between the anchor point of the LE connection event and the beginning of the CS event. Parameters: <EventOffset> integer Range: 500 to 4e6 *RST: Example: Example "To configure CS sequence settings"...
  • Page 191 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE // ***************************************************************************** // Configure channel selection settings of a CS subevent. // ***************************************************************************** :SOURce1:BB:BTOoth:CS:CFCHm? // Response: "#H00000000000000000001,80" // CSFilteredChM value is 00000000000000000001 in hexadecimal reperesentation. :SOURce1:BB:BTOoth:CS:CMRepetition 1 // Sets one cycle of the ChM field for non-Mode-0 steps within the CS procedure.
  • Page 192 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE For :SOURce1:BB:BTO:CS:SNUM 2 or higher, settable subevent intervals depend on the number of event intervals, the connection interval, the event offset and the sube- vent length. See also on page 192.
  • Page 193 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE Setting requires manual step scheduling. Settable minimum values are 1 or equal to the number of non-zero Mode-0 steps. See also [:SOURce<hw>]:BB:BTOoth:CS: on page 192. SSCHeduling Parameters: <NumOfSteps> integer...
  • Page 194 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE 8.5.3 CS step configuration commands Example: To configure CS steps for subevent 0 // ***************************************************************************** // Configure general CS step settings of the first subevent "Subevent 0". // ***************************************************************************** // Configure general subevent settings.
  • Page 195 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE For an overview on available submodes per main mode, see Table 5-8. Parameters: <mainMode> MODE1 | MODE2 | MODE3 MODE1 Mode-1 mode with no submode available. MODE2 Mode-2 mode with submodes Mode-1 and Mode-3 available.
  • Page 196 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE Example: Example "To configure CS subevent settings" on page 190. Manual operation: "Main_Mode_Min_Steps" on page 101 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:MMSTeps? Queries the number of main mode CS steps. Return values: <MMSTeps> integer...
  • Page 197 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE Parameters: <TIPO> TIP1_10 | TIP1_20 | TIP1_30 | TIP1_40 | TIP1_50 | TIP1_60 | TIP1_80 | TIP1_145 TIP1_x, x represents values in microseconds. *RST: TIP1_145 Example: Example "To configure CS subevent settings"...
  • Page 198 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE Manual operation: "T_PM" on page 105 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:MTHRee:TIPT <TIPT> [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:MTWO:TIPT <TIPT> Sets the time "T_IP2" for Mode-2 or Mode-3 CS steps. Parameters: <TIPT> TIP2_10 | TIP2_20 | TIP2_30 | TIP2_40 | TIP2_50 | TIP2_60 | TIP2_80 | TIP2_145 TIP2_x, x represents values in microseconds.
  • Page 199 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE Select the file from the default instrument directory or a specific directory. Parameters: <UserPayload> string Example: Example "To configure CS step settings for a subevent" on page 200. Manual operation: "Select Data List"...
  • Page 200 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE 8.5.4 CS step info commands Example: To configure CS step settings for a subevent // ***************************************************************************** // Configure general settings of a CS subevent. // ***************************************************************************** // Configure general subevent settings.
  • Page 201 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>][:STEP<st0>]:CINDex <ChannlIndex> Queries the channel index for individual CS steps. Parameters: <ChannlIndex> integer Range: 0 to 78 *RST: Example: Example "To configure CS step settings for a subevent" on page 200.
  • Page 202 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE <BitCount> integer Range: 32 to 128 *RST: Example: Example "To configure CS step settings for a subevent" on page 200. Manual operation: "Sounding Sequence Content/Random Sequence Content" on page 110 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>][:STEP<st0>]:CSIGnal...
  • Page 203 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE Select the file from the default instrument directory or a specific directory. Parameters: <DataList> string Example: Example "To configure CS step settings for a subevent" on page 200. Manual operation: "Companion Signal"...
  • Page 204 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE Return values: <CenterFreq> float For a description, see also table Table 2-13. Range: 2402 to 2480 Increment: 2 *RST: 2402 Example: Example "To configure CS subevent settings" on page 190.
  • Page 205 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE 1|ON Enables transmission of the subevent for the selected channel. 0|OFF Disables transmission of the subevent for the selected channel. *RST: Example: Example "To configure CS subevent settings" on page 190.
  • Page 206 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE <BitCount> integer Fixed bit count of 64 bits. Range: 64 to 64 *RST: Example: Example "To configure CS subevent settings" on page 190. Manual operation: "CS_IV_P(hex)" on page 97 [:SOURce<hw>]:BB:BTOoth:CS:CINC <CsInC>, <BitCount>...
  • Page 207 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE [:SOURce<hw>]:BB:BTOoth:CS:CSPVc <csPvC> Parameters: <csPvC> 64 bits Manual operation: "CS_PV_C(hex)" on page 97 [:SOURce<hw>]:BB:BTOoth:CS:CPVP <CsPvP>, <BitCount> Requires packet type CS SEQUENCE or LL_CS_SEC_REQ. Sets the CS_PV_P parameter. The parameter is 64-bit in hexadecimal representation.
  • Page 208 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel sounding commands - LE Return values: <CsFilteredChM> numeric CSFilteredChM value in hexadecimal representation. *RST: Example: Example "To configure CS subevent settings" on page 190. Usage: Query only Manual operation: "CSFilteredChM(hex)" on page 98 [:SOURce<hw>]:BB:BTOoth:CS:CMRepetition <ChMRepetition>...
  • Page 209 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Parameters: <ChThreeCJump> JUMP_2 | JUMP_3 | JUMP_4 | JUMP_5 | JUMP_6 | JUMP_7 | JUMP_8 For Ch3cJump field parameters, see Table 5-7. *RST: JUMP_2 Example: Example "To configure CS subevent settings"...
  • Page 210 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE // ****************************************************************** // Alternatively set periodic advertising interval for AUX_SYNC_IND // ****************************************************************** SOURce1:BB:BTOoth:CTYPe ADV SOURce1:BB:BTOoth:UPTYpe ASIN SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:PAINterval // ****************************************************************** // Select packet type AUX_ADV_IND. (All parameters of // extended header are configurable with AUX_ADV_IND packet // type.) Set channel selection,...
  • Page 211 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:ADID #H01FF,12 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:ASID #H0F,4 // ****************************************************************** // Enable and specify AuxPtr for the secondary advertising // channel: select AUX channel, set clock accuracy, offset unit, // AUX offset, AUX PHY.
  • Page 212 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Example: To configure data packets // ****************************************************************** // Configure signal for DATA: select channel type, packet type, // packet format, sequence length, role, enable CRC corruption. // ****************************************************************** SOURce1:BB:BTOoth:CTYPe DATA...
  • Page 213 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit1:STATe 1 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit2:STATe 1 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit3:STATe 1 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit4:STATe 1 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit5:STATe 1 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit6:STATe 1 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit7:STATe 0 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit8:STATe 1 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit9:STATe 0 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit10:STATe 0 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit11:STATe 0 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit12:STATe 0 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit13:STATe 0 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit14:STATe 1 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:FSBit15:STATe 0...
  • Page 214 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE // ****************************************************************** // Set the payload of LL_PHY_REQ: specify preferred Tx, Rx PHYs. // ****************************************************************** SOURce1:BB:BTOoth:CTYPe DATA SOURce1:BB:BTOoth:UPTYpe PREQ SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:L1M:STATe 1 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:L2M:STATe 1 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:LCOD:STATe 0 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:RPHYs:L1M:STATe 1 SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:RPHYs:L2M:STATe 1...
  • Page 215 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE // configure CTE method, set event counter properties, specify PHYs // and address type. // ****************************************************************** :SOURce1:BB:BTOoth:CTYPe DATA :SOURce1:BB:BTOoth:UPTYpe PSIN :SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:CPResent 1 :SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:CTIMe 0.016 :SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:CTYPe AOA :SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:ID #HAAAA,16 :SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:SPOFfset 245.7...
  • Page 216 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Example: Example "To configure data packets" on page 212. Manual operation: "Data Whitening" on page 59 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:AADDress <AAddress>, <BitCount> Sets the access address of the link layer connection (32-bit string).
  • Page 217 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:CSELection <CSelection> Specifies the algorithm of channel selection. Parameters: <CSelection> CS1 | CS2 Algorithm #1 or algorithm #2 *RST: Example: Example "To configure advertising packets" on page 209. Options: R&S SMM-K117...
  • Page 218 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Example: Example "To configure data packets" on page 212. Manual operation: "CTEInfo Present" on page 61 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:CTIMe <CTime> Sets the CTETime comprising the length of constant tone extension field of the Blue- tooth LE PDU.
  • Page 219 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE AOD2 AoD Constant Tone Extension with 2 µs time slots *RST: Example: Example "To configure data packets" on page 212. Manual operation: "CTEType" on page 63 [:SOURce<hw>]:BB:BTOoth:ECONfig:PCONfig:ANTGain<ch0> <AntennaGain> Specifies the gain of the antenna. You can specify the antenna gain infomation of up for four individual antennas for direction finding.
  • Page 220 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE ........224 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SLAP ........224 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:TLAP .......224 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ALENgth ........ 225 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:AMODe ......... 225 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ANUap ........225 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:INUap ......... 225 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SNUap ......... 225 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:TNUap .......226 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:AOFFset ....... 226 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:AOUNits ........226 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:APHY...
  • Page 221 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE ......238 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:NCINterval ......238 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:NLCTimeout ......238 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:NSLatency ......239 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:NWOFfset ........239 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:NWSize .......239 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:OADJust ....240 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHYS:L1M:STATe ....240 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHYS:L2M:STATe ....240 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHYS:LCOD:STATe ........ 240 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:TATYpe ........240 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:RATYpe ......241 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ROPCode ....241...
  • Page 222 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE PATTern User-defined pattern. The pattern can be specified via: [:SOURce<hw>]:BB:BTOoth:ECONfiguration: on page 222 PCONfiguration:ACAD:APATtern PNxx Pseudo-random bit sequences (PRBS) of a length of xx bits. The length in bit can be 9, 11, 15, 16, 20, 21, or 23.
  • Page 223 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Example: Example "To configure advertising packets" on page 209. Options: R&S SMM-K117 Manual operation: "AList / Pattern" on page 70 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ACID <Acid>, <BitCount> [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ACASsigned <AcAssigned>, <BitCount> [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SCASsigned <ScAssigned>, <BitCount>...
  • Page 224 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Parameters: <Adid> numeric *RST: #H000 <BitCount> integer Range: 12 to 12 *RST: Example: Example "To configure advertising packets" on page 209. Options: R&S SMM-K117 Manual operation: "Advertising Data ID(hex)"...
  • Page 225 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Manual operation: "ACAD Length" on page 70 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:AMODe <AMode> Indicates the mode of the advertisement. Parameters: <AMode> NCNS | CNS | NCS NCNS: Non-connectable, non-scannable CNS: Connectable, non-scannable NCS: Non-connectable, non-scannable...
  • Page 226 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:AOFFset <AOffset> Specifies the time from the start of the packet containing the AuxPtr field to the approx- imate start of the auxiliary packet. The offset is determined by multiplying the value by the unit, see [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:AOUNits...
  • Page 227 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ASID <Asid>, <BitCount> Specifies the "Advertising Set ID" in hexadecimal format to be signaled within an extended header. Parameters: <Asid> numeric *RST: <BitCount> integer Range: 4 to 4 *RST: Example: Example "To configure advertising packets"...
  • Page 228 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE <BitCount> integer Range: 16 to 16 *RST: Example: Example "To configure data packets" on page 212. Manual operation: "Company Id(hex)" on page 84 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:CINStant <CInstant> Sets a connection instant for indicating the connection event at which the new connec- tion parameters are taken in use.
  • Page 229 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE PATTern User-defined pattern. The pattern can be specified via: [:SOURce<hw>]:BB:BTOoth:ECONfiguration: on page 229 PCONfiguration:DATA:DPATtern PNxx Pseudo-random bit sequences (PRBS) of a length of xx bits. The length in bit can be 9, 11, 15, 16, 20, 21, or 23.
  • Page 230 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Parameters: <DSelection> string Example: Example "To configure advertising packets" on page 209. Manual operation: "Data Source" on page 65 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:DLENgth <DLength> Sets the payload data length in bytes. Parameters: <DLength>...
  • Page 231 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Parameters: <ECounter> integer Range: 0 to 65535 *RST: Example: Example "To configure advertising packets" on page 209. Options: R&S SMM-K117 Manual operation: "Event Counter" on page 74 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:EDIVersifier <EDiversifier>, <BitCount>...
  • Page 232 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Parameters: <State> 1 | ON | 0 | OFF *RST: Example: Example "To configure advertising packets" on page 209. Options: R&S SMM-K117 Manual operation: "AdvA" on page 68 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:EHFLags:ADINfo: STATe <State>...
  • Page 233 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:EHFLags:SINFo: STATe <State> Enables / disables the signaling of SyncInfo field for periodic advertisement. Parameters: <State> 1 | ON | 0 | OFF *RST: Example: Example "To configure advertising packets"...
  • Page 234 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Enables features of the feature set within the the link layer control PDU. See also Table 5-5. Suffix: <ch0> 0 to 27 Bit number that relates to a feature Parameters: <State>...
  • Page 235 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:LCTimeout <LcTimeout> Defines the maximum time between two correctly received Bluetooth LE packets in the LL connection before the connection is considered lost for the packet type CON- NECT_IND.
  • Page 236 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Parameters: <MTOctets> integer Range: 27 to 251 *RST: Example: Example "To configure data packets" on page 212. Options: R&S SMM-K117 Manual operation: "MaxRxOctets/MaxTxOctets" on page 85 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MSKD <Mskd>, <BitCount>...
  • Page 237 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MUCHannels <Muchannels> Specifies the minimum number of channels to be used on the specified PHYs, see [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHYS:L1M: etc. STATe Parameters: <Muchannels> integer Range: 2 to 37 *RST: Example: Example "To configure data packets"...
  • Page 238 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:NCINterval <NcInterval> Sets the time interval new connection events for the packet types CONNECT_IND and LL_CONNECTION_UPDATE_IND. Command sets the values in ms. Query returns values in s. Parameters: <NcInterval>...
  • Page 239 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Example: SOURce1:BB:BTO:UPTY CUR sets packet type LL_CONNECTION_UPDATE_IND SOURce1:BB:BTO:ECON:PCON:NSLatency 10 sets the number of consecutive connection events. Manual operation: "Peripheral Latency" on page 78 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:NWOFfset <NwOffset> Sets the start point of the transmit window for data event and advertising frame config- uration with the packet type LL_CONNECTION_UPDATE_IND.
  • Page 240 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Manual operation: "Offset Adjust" on page 74 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHYS:L1M:STATe <State> [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHYS:L2M:STATe <State> [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHYS:LCOD:STATe <State> Specifies the physical layers for which the Peripheral has a minimum number of used channels requirement. Information is signaled via LL_MIN_USED_CHANNELS_IND.
  • Page 241 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ROPCode <ROpcode>, <BitCount> Specifies the Opcode of rejected LL control PDU. information is signaled via LL_REJECT_EXT_IND. Parameters: <ROpcode> numeric *RST: #H00 <BitCount> integer Range: 8 to 8 *RST: Example: Example "To configure data packets"...
  • Page 242 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE The parameter is an initialization vector provided by the Host in the HCI_ULP_Start_Encryption command. Parameters: <RVector> numeric *RST: <BitCount> integer Range: 64 to 64 *RST: Example: SOURce1:BB:BTO:ECON:PCON:RVEC #H0000000000000000,64 Sets the random vector of the Central.
  • Page 243 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Example: SOURce1:BB:BTO:UPTY CREQ Sets packet type CONNECT_IND. SOURce1:BB:BTO:ECON:PCON:SLAT 10 Sets the number of consecutive connection events. Manual operation: "Peripheral Latency" on page 78 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SOUNits <Unit> Indicates the units used by the "Sync Packet Offset" parameter, see [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SPOFfset...
  • Page 244 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE LL_VERSION_IND. Parameters: <SvNumber> numeric *RST: <BitCount> integer Range: 16 to 16 *RST: Example: SOURce1:BB:BTO:ECON:PCON:SVN #H0000,16 Sets the sub version number. Manual operation: "SubVersion Number(hex)" on page 84 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPOWer <TPower>...
  • Page 245 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:VNUMber <VNumber>, <BitCount> Sets the company identifier of the manufacturer of the Bluetooth controller. An 8-bit value is set. Note: This parameter is relevant for data frame configuration and for the packet type LL_VERSION_IND.
  • Page 246 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Example: Example "To configure data packets" on page 212. Manual operation: "Transmit Window Size" on page 77 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ATYPe <AType> Sets the address type in the payload of Bluetooth LE LL_PERIODIC_SYNC_IND pack- ets.
  • Page 247 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:LPECounter <LPECounter> Specifies the lastPaEventCounter field in the CtrData field of the LL_PERI- ODIC_SYNC_IND PDU. Parameters: <LPECounter> integer Range: 0 to 65535 *RST: Example: Example "To configure data packets"...
  • Page 248 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Example: Example "To configure data packets" on page 212. Manual operation: "PHY" on page 88 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:PHY:LCOD:STATe <State> Sets the LE Coded PHY in the CtrData field of the LL_PERIODIC_SYNC_IND PDU.
  • Page 249 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE 8.6.4 Cs payload configuration Example: To configure CS control PDUs // ***************************************************************************** // Configure settings of an LE uncoded PHY test packet. // ***************************************************************************** // Set for a data channel test packet in the LE uncoded PHY.
  • Page 250 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE // There is one unique Cs configuration. You can have up to four independent // Cs configurations. :SOURce1:BB:BTOoth:CS:CDATa:NFAE 1 // The transmitting LE device only supports an FAE of zero.
  • Page 251 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Commands: ......252 [:SOURce<hw>]:BB:BTOoth:CS:CDATa[:BPOSition<ch0>]:TFCapability ......252 [:SOURce<hw>]:BB:BTOoth:CS:CDATa[:BPOSition<ch0>]:TIPO:CAPability ......252 [:SOURce<hw>]:BB:BTOoth:CS:CDATa[:BPOSition<ch0>]:TIPT:CAPability ......253 [:SOURce<hw>]:BB:BTOoth:CS:CDATa[:BPOSition<ch0>]:TPCapability .........253 [:SOURce<hw>]:BB:BTOoth:CS:CDATa[:CHANnel<ch0>]:CFAE ..............253 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:ACI ............. 254 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CECount ............254 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CCID:STATe ..............254 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CID ............254 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CSAThreec .............. 255 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CSIGnal...
  • Page 252 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE ............265 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:SPEStimate ...............266 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:SMODe ............266 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CSPCapability? [:SOURce<hw>]:BB:BTOoth:CS:CDATa[:BPOSition<ch0>]:TFCapability <TfcsCapability> Enables the T_FCS capability including the T_FCS time per bit position. Suffix: BPOSition<ch0> 0 to 9 Bit position (optional suffix) Parameters: <TfcsCapability>...
  • Page 253 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Example: Example "To configure CS control PDUs" on page 249. Manual operation: "T_IP2_Capability Table" on page 117 [:SOURce<hw>]:BB:BTOoth:CS:CDATa[:BPOSition<ch0>]:TPCapability <TpmCapability> Enables the T_PM capability including the T_PM time per bit position.
  • Page 254 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CECount <ConnEventCount> Sets the 16-bit connEventCount field bits in hexadecimal representation. Parameters: <ConnEventCount> integer Range: 0 to 65535 *RST: Example: Example "To configure CS control PDUs" on page 249.
  • Page 255 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CSIGnal <CompanionSignal> Enables the companion signal. See also "Companion Signal" on page 110. Parameters: <CompanionSignal> 1 | ON | 0 | OFF *RST: Example: Example "To configure CS control PDUs"...
  • Page 256 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Manual operation: "Max_Ant_Path" on page 114 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:MMASteps <MMMaxSteps> Sets the maximum number of main mode steps. Parameters: <MMMaxSteps> integer Range: 2 to 255 *RST: Example: Example "To configure CS control PDUs"...
  • Page 257 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Example: Example "To configure CS control PDUs" on page 249. Manual operation: "Main_Mode_Repetition" on page 119 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:MPLength <MPLength> Sets the time value of the Max_Procedure_Len field. The value has a length of two octets or 6 bits.
  • Page 258 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Parameters: <Mode0Steps> integer Range: 1 to 3 *RST: Example: Example "To configure CS control PDUs" on page 249. Manual operation: "Mode_0_Steps" on page 119 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:NANT <NumAnt> Sets the bits of the Num_Ant field. This field indicates the number of antenna elements of the channel sounding device.
  • Page 259 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Manual operation: "No_FAE" on page 115 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:NRSCapability <NRSCapability> Sets the NADM random sequence capability. Parameters: <NRSCapability> NONADM | NADM NONADM NADM disabled NADM NADM enabled *RST: NONADM Example: Example "To configure CS control PDUs"...
  • Page 260 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Parameters: <OffsetMin> integer Range: 500 to 4e6 *RST: Example: Example "To configure CS control PDUs" on page 249. Manual operation: "Offset_Min" on page 122 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:PCOunt <ProcCount> Sets the bits in the Procedure_Count field. The value has a length of 2 octets.
  • Page 261 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Manual operation: "PHY" on page 119 "PHY" on page 124 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:PINTerval <ProcInterval> Sets the procedure interval in the Procedure_Interval field. The value has a length of two octets or 6 bits.
  • Page 262 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE These bits determine the time values for the RTT_AA_Only_N field, the RTT_Sound- ing_ N field and the RTT_Random_Sequence_N field. Parameters: <RttCapability> CAP0 | CAP1 | CAP2 See the table Table 5-9 for an overview.
  • Page 263 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Manual operation: "T_FCS" on page 121 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:TIONe <TipOne> Sets the time "T_IP1" in microseconds. Parameters: <TipOne> TIP1_10 | TIP1_20 | TIP1_30 | TIP1_40 | TIP1_50 | TIP1_60 | TIP1_80 | TIP1_145 TP1_x, x represents values in microseconds.
  • Page 264 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Parameters: <Tsw> TSW_0 | TSW_1 | TSW_2 | TSW_4 | TSW_10 Duration of the antenna switch period is 0, 1, 2, 4 or 10 micro- seconds. *RST: n.a. (no preset. default: TSW_0) Example: Example "To configure CS control PDUs"...
  • Page 265 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - LE Parameters: <SubInterval> integer Range: 0 to 2.7e11 *RST: Example: Example "To configure CS control PDUs" on page 249. Manual operation: "Subevent_Interval" on page 123 "Subevent_Interval" on page 126 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:SLENgth <SubLength>...
  • Page 266 ® Remote control commands R&S SMM-K60/-K117/-K178 Test packet configuration commands - LE *RST: Example: Example "To configure CS control PDUs" on page 249. Manual operation: "Sounding_PCT_Estimate" on page 115 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:SMODe <SubMode> Sets the submode of the main mode. Parameters: <SubMode>...
  • Page 267 ® Remote control commands R&S SMM-K60/-K117/-K178 Test packet configuration commands - LE SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:SWORd SW // Fixed sync word value of 0x94826E8E. // Alternatively, set a user-defined sync word. SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:SWORd UPAT SOURce1:BB:BTOoth:ECONfiguration:PCONfiguration:USER FFFFFFFFF // Sync word is 0xFFFFFFFFF. // Configure payload settings.
  • Page 268 ® Remote control commands R&S SMM-K60/-K117/-K178 Test packet configuration commands - LE UPAT User-defined pattern allowing 8-digit hexadecimal input via the following command: [:SOURce<hw>]:BB:BTOoth:ECONfiguration: on page 268 PCONfiguration:USERpatt *RST: Example: Example "To configure test packets" on page 266. Manual operation: "Sync Word"...
  • Page 269 ® Remote control commands R&S SMM-K60/-K117/-K178 Test packet configuration commands - LE [:SOURce<hw>]:BB:BTOoth:DTTest:TPConfiguration:UPLength <UpLength> Sets the payload length. Parameters: <UpLength> integer Range: 0 to 255 *RST: Example: Example "To configure test packets" on page 266. Manual operation: "Payload Length" on page 131 [:SOURce<hw>]:BB:BTOoth:DTTest:TPConfiguration:UPSource <UpSource>...
  • Page 270 ® Remote control commands R&S SMM-K60/-K117/-K178 Channel configuration commands - BR/EDR 8.8 Channel configuration commands - BR/EDR ................270 [:SOURce<hw>]:BB:BTOoth:PTYPe ................270 [:SOURce<hw>]:BB:BTOoth:SLENgth ................270 [:SOURce<hw>]:BB:BTOoth:STIMing [:SOURce<hw>]:BB:BTOoth:PTYPe <PType> The available packets depend on the selected transport mode. All packet types as defined in the Bluetooth specifications are supported.
  • Page 271 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - BR/EDR Manual operation: "Slot Timing" on page 133 8.9 Packet configuration commands - BR/EDR ........271 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:ACKNowledgement ............272 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:BDALap ............272 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:BDANap ............272 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:BDAUap ............ 273 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:CODevice ............273 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DATA ..........273 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DATA:DPATtern...
  • Page 272 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - BR/EDR [:SOURce<hw>]:BB:BTOoth:PCONfiguration:BDALap <BdaLap>, <BitCount> Sets the lower address part of Bluetooth Device Address. The length of LAP is 24 bits or 6 hexadecimal figures. Parameters: <BdaLap> numeric Range: #H000000 to #HFFFFFF *RST: <BitCount>...
  • Page 273 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - BR/EDR Example: BB:BTO:PCON:BDAN #H00,8 Sets the non-significant address part. Manual operation: "Bluetooth Device Address (BD_ADDR)" on page 136 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:CODevice <CoDevice>, <BitCount> A parameter received during the device discovery procedure, indicates the type of device and which types of service that are supported.
  • Page 274 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - BR/EDR Parameters: <DPattern> numeric *RST: <BitCount> integer Range: 1 to 64 *RST: Example: BB:BTO:PCON:DATA PATT Sets the data type. BB:BTO:PCON:DATA:DPAT #B010101,6 Selects the data for a pattern with the length of 6 bits.
  • Page 275 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - BR/EDR [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DATA:VDSElection <VdSelection> Selects the data list for voice data. Parameters: <VdSelection> string Example: BB:BTO:PCON:VDAT DLIS selects the data type. BB:BTO:PCON:VDSE bluetooth_1 selects the file for the data. Manual operation: "Data Source (Voice Field)"...
  • Page 276 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - BR/EDR [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DWHitening <DWhitening> Activates the "Data Whitening". Parameters: <DWhitening> 1 | ON | 0 | OFF *RST: Example: BB:BTO:PCON:DWH ON activates data whitening. Manual operation: "Data Whitening" on page 135 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:EIRPacketfollows <EirPacketFollow>...
  • Page 277 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - BR/EDR Example: BB:BTO:PCON:PTYP DH1 sets the packet type. BB:BTO:PCON:DSFP PED enable packet editor under data source for packet. BB:BTO:PCON:HFC GO allows the other devices to transmit new data. Manual operation: "Flow Control"...
  • Page 278 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - BR/EDR [:SOURce<hw>]:BB:BTOoth:PCONfiguration:PFControl <PfControl> The command sets the FLOW bit in the payload (flow control per logical link). Parameters: <PfControl> GO | STOP Indicates the start of transmission of ACL packets after a new connection has been established.
  • Page 279 ® Remote control commands R&S SMM-K60/-K117/-K178 Packet configuration commands - BR/EDR Example: BB:BTO:PCON:SLAP 0 deactivates LAP synchronization. BB:BTO:PCON:LFSW #H000080,24 sets LAP of the sync word separately. Manual operation: "Synchronize LAP with BD_ADDR" on page 135 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:SNSValue <SnSvalue> Sets the start value of the header SEQN bit. The SEQN bit is present in the header to filter out retransmissions in the destination.
  • Page 280 ® Remote control commands R&S SMM-K60/-K117/-K178 Filter/clipping commands Manual operation: "Scan Repetition Mode" on page 139 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:VDATa <VData> Selects the data source for the voice field. Parameters: <VData> ALL0 | ALL1 | PATTern | PN09 | PN11 | PN15 | PN16 | PN20 |...
  • Page 281 ® Remote control commands R&S SMM-K60/-K117/-K178 Filter/clipping commands Parameters: <Level> integer Range: 1 to 100 Increment: 1 *RST: Default unit: PCT Example: SOURce1:BB:BTO:CLIP:LEV 80 Sets the limit for level clipping to 80% of the maximum level. SOURce1:BB:BTO:CLIP:STAT ON Activates level clipping.
  • Page 282 ® Remote control commands R&S SMM-K60/-K117/-K178 Filter/clipping commands These filters are the common GFSK baseband filter and, for some EDR packets, a DPSK filter. See also Table 7-1. Return values: <filters> string SOURce1:BB:BTO:FILT:FILT? Example: // Response: "GFSK, Root Raised Cosine (RRC)"...
  • Page 283 ® Remote control commands R&S SMM-K60/-K117/-K178 Filter/clipping commands [:SOURce<hw>]:BB:BTOoth:FILTer:ILENgth:AUTO[:STATe] <State> Activates the impulse length state. If activated, the most sensible parameter values are selected. The value depends on the coherence check. Parameters: <State> 1 | ON | 0 | OFF...
  • Page 284 ® Remote control commands R&S SMM-K60/-K117/-K178 Filter/clipping commands Example: SOURce1:BB:BTO:FILT:MIND? Queries the modulation index // Response: "0.5" Manual operation: "Modulation Index" on page 146 [:SOURce<hw>]:BB:BTOoth:FILTer:MTYPe <MType> Queries the modulation type used for the current packet selection. Parameters: <MType> string Example:...
  • Page 285 ® Remote control commands R&S SMM-K60/-K117/-K178 Filter/clipping commands Parameters: <Cosine> float Range: 0 to 1 Increment: 0.01 *RST: Example: SOURce1:BB:BTO:FILT:PAR:COS 0.35 Sets the roll-off factor to 0.35 for filter type Cosine. Manual operation: "B*T" on page 143 "Roll Off Factor/B*T"...
  • Page 286 ® Remote control commands R&S SMM-K60/-K117/-K178 Filter/clipping commands Parameters: <LPass> float Range: 0.05 to 2 Increment: 0.01 *RST: Example: SOURce1:BB:BTO:FILT:PAR:LPAS 1 Sets the cut off frequency factor for a lowpass filter. Manual operation: "B*T" on page 143 "Roll Off Factor/B*T"...
  • Page 287 ® Remote control commands R&S SMM-K60/-K117/-K178 Power ramping commands Parameters: <SPhase> float Range: 0.15 to 2.5 Increment: 0.01 *RST: Example: SOURce1:BB:BTO:FILT:PAR:SPH 0.5 Sets B x T to 0.5 for the Split Phase filter type. Manual operation: "B*T" on page 143 "Roll Off Factor/B*T"...
  • Page 288 ® Remote control commands R&S SMM-K60/-K117/-K178 Power ramping commands Example: BB:BTO:PRAM:FOFF 8 Adds eight symbols at the end of the burst. Manual operation: "Fall Offset" on page 149 [:SOURce<hw>]:BB:BTOoth:PRAMping:RFUNction <RFunction> The command selects the form of the transmitted power, i.e. the shape of the rising and falling edges during power ramp control.
  • Page 289 ® Remote control commands R&S SMM-K60/-K117/-K178 Trigger commands Example: BB:BTO:PRAM:TIME 2 Extends the burst by 2 symbols at the beginning and end of the burst. Manual operation: "Ramp Time" on page 149 8.12 Trigger commands Example: To configure an external trigger...
  • Page 290 ® Remote control commands R&S SMM-K60/-K117/-K178 Trigger commands ............290 [:SOURce<hw>]:BB:BTOoth[:TRIGger]:SEQuence ..............290 [:SOURce<hw>]:BB:BTOoth:TRIGger:SOURce ..............291 [:SOURce<hw>]:BB:BTOoth:TRIGger:RMODe ............291 [:SOURce<hw>]:BB:BTOoth:TRIGger:TIME:DATE ............. 291 [:SOURce<hw>]:BB:BTOoth:TRIGger:TIME:TIME ............292 [:SOURce<hw>]:BB:BTOoth:TRIGger:TIME[:STATe] ..............292 [:SOURce<hw>]:BB:BTOoth:TRIGger:SLENgth ..............293 [:SOURce<hw>]:BB:BTOoth:TRIGger:SLUNit ............293 [:SOURce<hw>]:BB:BTOoth:TRIGger:ARM:EXECute ..............293 [:SOURce<hw>]:BB:BTOoth:TRIGger:EXECute ......293 [:SOURce<hw>]:BB:BTOoth:TRIGger[:EXTernal]:SYNChronize:OUTPut ............294 [:SOURce<hw>]:BB:BTOoth:TRIGger[:EXTernal]:DELay ............294...
  • Page 291 ® Remote control commands R&S SMM-K60/-K117/-K178 Trigger commands OBASeband = INTA, BEXTernal = EGT2, EXTernal = EGT1 Parameters: <Source> INTernal|EGT1|EGT2|EGC1|EGC2|EXTernal|BBSY *RST: INTernal Example: Example "To configure an external trigger" on page 289. Example: Example "To configure an internal trigger" on page 289.
  • Page 292 ® Remote control commands R&S SMM-K60/-K117/-K178 Trigger commands SOURce<hw>:BB:<DigStd>:TRIGger:TIME:STATe <DigStd> is the mnemonic for the digital standard, for example, ARB. Time-based trig- gering behaves analogously for all digital standards that support this feature. Parameters: <Time> string Example: See example "Configure a time-based trigger signal" in the sub- chapter "Trigger Commands"...
  • Page 293 ® Remote control commands R&S SMM-K60/-K117/-K178 Trigger commands Manual operation: "Signal Duration" on page 151 [:SOURce<hw>]:BB:BTOoth:TRIGger:SLUNit <SlUnit> Defines the unit for the entry of the signal sequence length. Parameters: <SlUnit> FRAMe | SEQuence | EVENt FRAMe A single frame is generated after a trigger event.
  • Page 294 ® Remote control commands R&S SMM-K60/-K117/-K178 Marker commands [:SOURce<hw>]:BB:BTOoth:TRIGger[:EXTernal]:DELay <Delay> Sets the trigger delay. Parameters: <Delay> float Range: 0 to 2147483647 Increment: 0.01 *RST: Example: Example "To configure an external trigger" on page 289. Manual operation: "External Delay/Trigger Delay" on page 154 [:SOURce<hw>]:BB:BTOoth:TRIGger[:EXTernal]:INHibit <Inhibit>...
  • Page 295 ® Remote control commands R&S SMM-K60/-K117/-K178 Marker commands // ****************************************************************** SOURce1:BB:BTOoth:TRIGger:OUTPut1:MODE PATTern SOURce1:BB:BTOoth:TRIGger:OUTPut1:PATTern #H2,2 // ****************************************************************** // Alternatively configure on/off ratio marker. Set on/off time. // ****************************************************************** SOURce1:BB:BTOoth:TRIGger:OUTPut1:MODE RAT SOURce1:BB:BTOoth:TRIGger:OUTPut1:ONTime 40000 SOURce1:BB:BTOoth:TRIGger:OUTPut1:OFFTime 20000 Example: To configure marker delay // ****************************************************************** // Enable fixed marker delay.
  • Page 296 ® Remote control commands R&S SMM-K60/-K117/-K178 Marker commands Parameters: <Shift> float Range: dynamic to dynamic Increment: 1E-6 *RST: Example: SOURce1:BB:BTO:TRIG:OUTP1:FESH 10 Shifts the falling edge of marker 1 by 75 samples. Example: See also Example "To configure a marker signal"...
  • Page 297 ® Remote control commands R&S SMM-K60/-K117/-K178 Marker commands Manual operation: "Mode" on page 155 [:SOURce<hw>]:BB:BTOoth:TRIGger:OUTPut<ch>:ONTime <OnTime> [:SOURce<hw>]:BB:BTOoth:TRIGger:OUTPut<ch>:OFFTime <OffTime> Sets the duration of the ON and OFF periods. Parameters: <OffTime> integer Range: 1 to 16777215 *RST: Example: Example "To configure a marker signal"...
  • Page 298 ® Remote control commands R&S SMM-K60/-K117/-K178 Clock commands Parameters: <Divider> integer Range: 2 to 1024 *RST: Example: Example "To configure a marker signal" on page 294. Manual operation: "Mode" on page 155 [:SOURce<hw>]:BB:BTOoth:TRIGger:OUTPut<ch>:PULSe:FREQuency? Queries the marker pulse frequency. Return values: <Frequency>...
  • Page 299 ® Remote control commands R&S SMM-K60/-K117/-K178 Clock commands Example: To configure clock settings // ****************************************************************** // Select internal clock. // ****************************************************************** SOURce1:BB:BTOoth:CLOCk:SOURce INTernal // ****************************************************************** // Alternatively select external clock. Set its mode. // ****************************************************************** SOURce1:BB:BTOoth:CLOCk:MODe SAMP ..............299 [:SOURce<hw>]:BB:BTOoth:CLOCk:SOURce [:SOURce<hw>]:BB:BTOoth:CLOCk:SOURce <Source>...
  • Page 300 ® Glossary: Specifications R&S SMM-K60/-K117/-K178 Glossary: Specifications Symbols [1]: Bluetooth SIG: Bluetooth Core Specification, version 5.4 https://www.bluetooth.com/specifications/specs/ [2]: Bluetooth SIG: Channel Sounding, revision CR_PR https://www.bluetooth.com/specifications/specs/ User Manual 1179.2054.02 ─ 08...
  • Page 301 ® List of commands R&S SMM-K60/-K117/-K178 List of commands [:SOURce<hw>]:BB:BTOoth:BCRole......................173 [:SOURce<hw>]:BB:BTOoth:BCText?......................161 [:SOURce<hw>]:BB:BTOoth:BMODe......................162 [:SOURce<hw>]:BB:BTOoth:CCRC:STATe....................173 [:SOURce<hw>]:BB:BTOoth:CLIPping:LEVel....................280 [:SOURce<hw>]:BB:BTOoth:CLIPping:MODE....................281 [:SOURce<hw>]:BB:BTOoth:CLIPping:STATe....................281 [:SOURce<hw>]:BB:BTOoth:CLOCk:SOURce....................299 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:ACI....................253 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CCID:STATe...................254 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CECount..................254 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CID....................254 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CSAThreec..................254 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CSIGnal..................255 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:CSPCapability?................266 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:ECODe..................255 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:EOFFset..................255 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:MAPath..................255 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:MMASteps..................256 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:MMISteps..................
  • Page 302 ® List of commands R&S SMM-K60/-K117/-K178 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:SNUMber..................265 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:SPEStimate................... 265 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:TFCS..................... 262 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:TIONe.................... 263 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:TITWo.................... 263 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:TPM....................263 [:SOURce<hw>]:BB:BTOoth:CS:CDATa:TSW....................263 [:SOURce<hw>]:BB:BTOoth:CS:CDATa[:BPOSition<ch0>]:TFCapability.............252 [:SOURce<hw>]:BB:BTOoth:CS:CDATa[:BPOSition<ch0>]:TIPO:CAPability..........252 [:SOURce<hw>]:BB:BTOoth:CS:CDATa[:BPOSition<ch0>]:TIPT:CAPability..........252 [:SOURce<hw>]:BB:BTOoth:CS:CDATa[:BPOSition<ch0>]:TPCapability.............253 [:SOURce<hw>]:BB:BTOoth:CS:CDATa[:CHANnel<ch0>]:CFAE..............253 [:SOURce<hw>]:BB:BTOoth:CS:CFCHm?....................207 [:SOURce<hw>]:BB:BTOoth:CS:CINC......................206 [:SOURce<hw>]:BB:BTOoth:CS:CINP......................206 [:SOURce<hw>]:BB:BTOoth:CS:CINTerval....................189 [:SOURce<hw>]:BB:BTOoth:CS:CIVC......................205 [:SOURce<hw>]:BB:BTOoth:CS:CIVP......................205 [:SOURce<hw>]:BB:BTOoth:CS:CMRepetition..................... 208 [:SOURce<hw>]:BB:BTOoth:CS:CPVP......................207 [:SOURce<hw>]:BB:BTOoth:CS:CSEL......................
  • Page 303 ® List of commands R&S SMM-K60/-K117/-K178 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:MTWO:TSW?..............197 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:MZERo:TIPO..............196 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:MZSTeps................193 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:NOSTep................192 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:PATTern................203 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:SEQLength............... 198 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:SMODe................195 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:SMSTep?................196 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:SSPace?................193 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:STYPe................198 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:TFCS................193 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:UPAYload................198 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>]:UPPattern................. 199 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>][:STEP<st0>]:CAADdress..........201 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>][:STEP<st0>]:CINDex............201 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>][:STEP<st0>]:CSIGnal............202 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>][:STEP<st0>]:CTEXtension..........203 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>][:STEP<st0>]:MTYPe?............200 [:SOURce<hw>]:BB:BTOoth:CS[:SEVent<ch0>][:STEP<st0>]:SCONtent............ 201 [:SOURce<hw>]:BB:BTOoth:CTYPe......................174 [:SOURce<hw>]:BB:BTOoth:DCYCle......................174...
  • Page 304 ® List of commands R&S SMM-K60/-K117/-K178 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:AADDress............216 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ACAD............221 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ACAD:APATtern.......... 222 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ACAD:ASELection........222 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ACASsigned..........223 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ACID............223 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ADID............223 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ALAP............224 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ALENgth............224 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:AMODe............225 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ANUap............225 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:AOFFset............226 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:AOUNits............226 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:APHY............226 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ASID............227 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ATYPe............246 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:CACCuracy..........227 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:CECount............246 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:CID.............. 227 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:CINStant............228 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:CINTerval.............228 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:CIValue............216 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:CPResent............ 217 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:CSELection..........
  • Page 305 ® List of commands R&S SMM-K60/-K117/-K178 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:ILAP.............224 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:INUap............225 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:LCTimeout........... 235 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:LPECounter..........247 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MCLReq............247 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MIVector............235 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MNINterval..........183 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MROCtets............235 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MRTime............236 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MSKD............236 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MTOCtets............ 235 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MTSPhy:L1M:STATe........237 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MTSPhy:L2M:STATe........237 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MTSPhy:LCOD:STATe........ 237 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MTTime............236 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MUCHannels..........237 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:MXINterval...........183 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:NCINterval...........238 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:NLCTimeout..........238 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:NSLatency...........238 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:NSValue............
  • Page 306 ® List of commands R&S SMM-K60/-K117/-K178 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SOUNits............243 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SPBit............267 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SPOFfset.............243 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SSKD............236 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SSValue............217 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:STMPhy:L1M:STATe........237 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:STMPhy:L2M:STATe........237 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:STMPhy:LCOD:STATe........ 237 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SVNumber...........243 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:SYNCword...........267 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:TATYpe............240 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:TLAP............224 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:TNUap............225 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:L1M:STATe........241 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:L2M:STATe........241 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:LCOD:STATe........241 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPOWer............244 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:USERpatt............ 268 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:UTYPe............244 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:VNUMber.............245 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:WOFFset............. 245 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PCONfiguration:WSIZe............245 [:SOURce<hw>]:BB:BTOoth:ECONfiguration:PNUMber................186...
  • Page 307 ® List of commands R&S SMM-K60/-K117/-K178 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:CODevice................273 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DATA..................273 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DATA:DPATtern..............273 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DATA:DSELection..............274 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DATA:VDPAttern..............274 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DATA:VDSElection..............275 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DLENgth................275 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DSFPacket................275 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:DWHitening................276 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:EIRPacketfollows..............276 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:HFControl................276 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:LFSWord................277 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:LTADdress................277 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:PFControl................278 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:PLENgth................278 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:SLAP..................278 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:SNSValue................279 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:SRMode.................279 [:SOURce<hw>]:BB:BTOoth:PCONfiguration:VDATa..................280 [:SOURce<hw>]:BB:BTOoth:PFORmat......................174 [:SOURce<hw>]:BB:BTOoth:PRAMping:FOFFset..................287 [:SOURce<hw>]:BB:BTOoth:PRAMping:RFUNction..................
  • Page 308 ® List of commands R&S SMM-K60/-K117/-K178 [:SOURce<hw>]:BB:BTOoth:TRIGger:SOURce....................290 [:SOURce<hw>]:BB:BTOoth:TRIGger:TIME:DATE..................291 [:SOURce<hw>]:BB:BTOoth:TRIGger:TIME:TIME..................291 [:SOURce<hw>]:BB:BTOoth:TRIGger:TIME[:STATe]..................292 [:SOURce<hw>]:BB:BTOoth:TRIGger[:EXTernal]:DELay................294 [:SOURce<hw>]:BB:BTOoth:TRIGger[:EXTernal]:INHibit................294 [:SOURce<hw>]:BB:BTOoth:TRIGger[:EXTernal]:SYNChronize:OUTPut.............293 [:SOURce<hw>]:BB:BTOoth:UNIT:TIME....................... 164 [:SOURce<hw>]:BB:BTOoth:UPTYpe......................175 [:SOURce<hw>]:BB:BTOoth:USLength......................177 [:SOURce<hw>]:BB:BTOoth:VERSion?......................164 [:SOURce<hw>]:BB:BTOoth:WAVeform:CREate..................165 [:SOURce<hw>]:BB:BTOoth[:TRIGger]:SEQuence..................290 User Manual 1179.2054.02 ─ 08...
  • Page 309 ® Index R&S SMM-K60/-K117/-K178 Index Advertising packet configuration ......... 58 Angle of arrival ............21 Access address ..............59 Angle of departure ............22 ACK ................. 137 Data packet configuration ........... 58 Acknowledgment ............. 137 Direction finding ............21 ACL+EDR ................37 Settings ...............
  • Page 310 ® Index R&S SMM-K60/-K117/-K178 Peripheral ..............48 T_IP2 ................ 121 Scanner ..............48 T_PM ................ 121 Conventions CS step info SCPI commands ............159 CS step table ............108 CRC initial ................. 60 CS step table Crest factor ..............147 Channel index ............
  • Page 311 ® Index R&S SMM-K60/-K117/-K178 Event configuration Channel table .............. 57 Event inactive part LAP ................. 136 Marker ............... 155 LAP for sync word ............135 Level Event start Marker ............... 155 Clipping ..............147 LL connection event count ..........82 LL connection mode ............
  • Page 312 ® Index R&S SMM-K60/-K117/-K178 EIR packet follows ............ 138 Restart Encrypted DIVersifier(hex) .......... 82 Marker ............... 155 Error code ..............82 Retrigger FeatureSet length ............83 Trigger mode .............151 Flow control (header) ..........136 Rise offset ............... 149 Flow control (Payload) ........138, 141 Roll off factor ............
  • Page 313 ® Index R&S SMM-K60/-K117/-K178 Frequency change period ........... 94 Interval ................ 92 Length ................. 92 Waveform file Mode-0 steps .............. 94 Create (Bluetooth) ............36 White papers ..............11 Number ............... 94 Number of steps ............94 Number of subevents ..........93 Space ................

This manual is also suitable for:

Smm-k117Smm-k178