quadient IS-280i User Manual page 44

Correcting a Postage Amount
Sequence of Settings
The procedure below outlines steps to correct the amount on mail that has already
been processed.
The sequence is identical to p.35, except for the following:
•
Postage must be set to the desired additional amount, instead of
•
Print the new postage on the back or bottom of the front of the envelope.
How to Correct Postage Amount (Settings)
How to Correct
Postage Amount
(Settings)
Make sure you have already completed the preparation steps
Preparing and Starting your Work Session
mentioned in
Required settings:
1
Make sure you are on the home screen of the [Normal]
type of imprint.
The home screen indicates weight, postage and currently se-
lected rate as illustrated below
2
Check or change the type of imprint .
Press and type
The type of imprint is indicated on line 2 of the screen.
To change the type of stamp :
Type
– Select the
– Press [OK] and then select [Normal] in the
screen.
– Press [OK] .
1
to access the
line.
0
.
p.29 .
Imprint
screen:
Type of stamp
3
41