quadient IS-280i User Manual page 43

3
40
In Standard weighing mode
rectly on mail pieces from the [Standard ] Home Screen:
1
Put the mail piece on the WP.
The weight of the mail piece is displayed in the
of the home screen and the postage amount is updated.
2
Withdraw the envelope from
the WP and insert it into the
system, with the side to be
printed facing upwards.
The Mailing System applies the imprint on the mail piece.
If a mail piece is bigger than mail path maximum thickness (see
Mail Specifications
p.185 ), you may print on a label instead.
When you put a mail piece on the Weighing Platform, the weight
value is saved when you remove it.
You can then print a batch of similar mail pieces (same weight)
without weighing them each. To print a batch of mixed mail pieces
(different weight), you need to weigh each mail piece before print-
ing.
, you can print postage di-
Weight
area