Subscribe to Our Youtube Channel
Related Manuals for Atel RE Series
Summary of Contents for Atel RE Series
- Page 1 About your RE600 Quick Start Guide RE Series by ATEL 5G Indoor CPE Model: RE600 Figure 1. LEDs & ports location Version 1.2...
- Page 2 LED Indicators Description RE600 Ports and LED Interface LEDs Good signal Green Type-C USB port for diagnosis and Provides information about RSRP > -95dBm engineering purposes only. your RE600. Refer to the LED Signal Normal signal description table for more Blue -95dBm >= RSRP >...
- Page 3 Setting up your RE600 5G CPE Package contents Installing the SIM cards • RE600 Indoor CPE Install the SIM cards in SIM 1 and SIM 2 slots as directed on the device. Power adapter • • Quick Start Guide External antennas •...
- Page 4 Connect the antennas to the cellular antenna ports in a clockwise direction. Note: There are labels indicating “Wi-Fi” and “Cell” on each antenna to distinguish between Wi-Fi and cellular antennas, respectively. Connecting wired or wireless clients Use the LAN port to connect your wired client using an ethernet cable.
- Page 5 Online Management Portal From the Dashboard menu, you can access different information and the network status, such as the signal You can access your RE600 5G CPE device online portal quality or network name. to view the RE600 status, change the RE600 settings, and If the network status is showing Connected and you perform manual software upgrades.
- Page 6 Try rebooting or factory resetting your RE600. • The device will then restore to factory settings. For support or any questions, contact us. Our website: www.atel-usa.com Note: To perform a factory reset or a restart process, Email:support@atel-usa.com make sure the power adapter is connected to the RE600, ©...
Need help?
Do you have a question about the RE Series and is the answer not in the manual?
Questions and answers