heat-timer Mini-MOD-CNC Installation And Operation Manual page 28

13
SETTING THE CONTROL TO FACTORY DEFAULTS
To Reset the Mini-MOD-CNC control to its original factory defaults, power down the
control. Hold down the two right most buttons while powering the control back up until the
Total Clear Started screen appears. The Display will direct you to the Startup menu
to program the control after the defaults are loaded.
NOTE
When resetting the control to original factory defaults all control settings will be overwritten and will no longer exist.
WARNING
DO NOT turn off power to control until all Startup settings have been made
Otherwise, the next power-up will be set to many Startup factory settings that might
not fit your application.
|
28 HEAT-TIMER CORP.
TOTAL CLEAR STARTED
Release buttons
and
Please wait
059102-00 REV. C