Download Print this page

Pro-Ject Audio Systems SIGNATURE 12.2 Manual page 9

b) Tonearm output connector:

After positioning the top part of the turntable tonearm, it is necessary to connect the output connector of the

tonearm. Insert the connector into the top part of the tonearm, ensuring the alignment of the centering pin,

which guarantees the correct position of the connector in the tonearm body. After inserting the connector,

screw on the securing stainless-steel nut to ensure sufficient contact between the tonearm pins and the

connector.

Need help?

Do you have a question about the SIGNATURE 12.2 and is the answer not in the manual?