Pro-Ject Audio Systems Primary E Phono Instructions For Use Manual

Pro-Ject Audio Systems Primary E Phono Instructions For Use Manual

Advertisement

INSTRUCTIONS FOR USE
Pro-Ject Primary E Phono

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Primary E Phono and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Pro-Ject Audio Systems Primary E Phono

  • Page 1 INSTRUCTIONS FOR USE Pro-Ject Primary E Phono...
  • Page 2 © Pro-Ject Audio Systems · Pro-Ject Primary E Phono / Pro-Ject 8.6E · Revision 2018.08.14...
  • Page 3: Controls, Features And Connections

    Switch between Phono and Line output (14) Phono output socket with earth connection Allen key 1.5mm (not shown)* Single adapter (not shown)* Connection cable (not shown)* Power supply (not shown)* © Pro-Ject Audio Systems · Pro-Ject Primary E Phono / Pro-Ject 8.6E · Revision 2018.08.14...
  • Page 4: Safety Instructions

    Please remove brown paper insert which holds the platter in transport position. Put the felt mat on the top of the platter. Install the drive belt as shown in the following illustration. © Pro-Ject Audio Systems · Pro-Ject Primary E Phono / Pro-Ject 8.6E · Revision 2018.08.14...
  • Page 5: Cartridge Downforce Adjustment

    For detailed product information regarding Pro-Ject Audio Phono amplifiers please refer to the Pro- Ject web site www.project-audio.com. The recommended load impedance for the factory fitted cartridge is: 47kohms/MM-input © Pro-Ject Audio Systems · Pro-Ject Primary E Phono / Pro-Ject 8.6E · Revision 2018.08.14...
  • Page 6: Maintenance And Cleaning

    The full sound quality of the record player can only be achieved if the cartridge is adjusted correctly. Particular tools like the Pro-Ject Audio Systems alignment tool are required to accomplish this job properly. If you are not well acquainted with the adjustment of cartridges, please call for the willing help of your Pro-Ject Audio Systems dealer.
  • Page 7: Useful Tips

    Technical specifications moving magnet phono pre-amplifier Gain 32dB Output voltage typically 200mV/1kHz at 5mV/1kHz input Input impedance 47kohms/100pF Noise floor -68dB RIAA-equalisation curve accuracy 20Hz-20kHz / max. 0,5dB © Pro-Ject Audio Systems · Pro-Ject Primary E Phono / Pro-Ject 8.6E · Revision 2018.08.14...
  • Page 8: Warranty

    This guide was produced by: Pro-Ject Audio without prior notice as deemed necessary to © Systems Copyright 2018. All rights reserved. uphold ongoing process technical development. © Pro-Ject Audio Systems · Pro-Ject Primary E Phono / Pro-Ject 8.6E · Revision 2018.08.14...
  • Page 9 © Pro-Ject Audio Systems · Pro-Ject Primary E Phono / Pro-Ject 8.6E · Revision 2018.08.14...

Table of Contents