Pro-Ject Audio Systems SIGNATURE 12.2 Manual page 2

Dear Music Lover,
Congratulations and thank you for choosing a Pro-Ject Audio Systems record player.
Your Signature 12.2 turntable has been handcrafted and rigorously tested by skilled technicians to give
you years of enjoyable and trouble-free service.
Please contact your dealer if you require additional assistance.
Important:
Your turntable was shipped partially disassembled in order to avoid damage to sensitive parts. Please
check immediately to make sure that neither the packaging nor the device was damaged in transit. If you are
missing parts or if the unit is damaged, please do not operate and contact your dealer.
Contents
Product illustrations
Setup
1. Transport screws
2. Main platter installation
3. Idler pulley assembly
4. Drive belt installation
5. Tonearm assembly
a) Detachable tonearm
b) Tonearm output connector
c) Horizontal movement locking screw
d) Headshell
e) Cartridge installation
f) Counterweight assembly / Vertical Tracking Force setting (VTF)
g) Anti-skating assembly and adjustment
6. Vertical tracking angle setting (VTA)
7. Azimuth adjustments
8. Levelling the turntable
9. Speed control
10. Connecting the power supply
11. Connection to the amplifier
12. Maintenance and cleaning
Technical parameters
Troubleshooting, warranty, service
Declaration of Conformity
Exploded view of the packaging
Please do your part to help protect the environment:
Disposal of packaging material:
Pro-Ject packaging is carefully designed to protect your components from damage in transit and you are
strongly urged to keep the original packaging in order to safely ship or otherwise transport your turntable in
the future.
However, the packaging materials were chosen to be environmentally friendly, so if you must discard the
packaging, please recycle.
2
© Pro-Ject Audio Systems· Signature 12.2 · Revision 08.08.2024
4-5
6
6-7
7
8
8
8
9
10
11
11-12
12-13
14-15
15-16
16-17
17
18
18
18
18
19
20
21
22