Download Print this page

Pro-Ject Audio Systems SIGNATURE 12.2 Manual page 7

3. IDLER PULLEY ASSEMBLY

The idler pulley is placed as part of the accessories in the small box in the top foam insert of the packaging.

Idler pulley consists of two parts. One is powered by the motor units, and one is floated on the magnetic

cushion. Both parts form a whole stored on a common shaft. Before installing this kit, remove the covers

from the shaft and bearing. Check for adequate lubrication. If necessary, lubricate with the grease provided

in the attached accessories.

Need help?

Do you have a question about the SIGNATURE 12.2 and is the answer not in the manual?