Water I.D. LabCOM PoolLAB 2.0 Manual page 27

Send measurements to the cloud | Pošalji mjerenja u oblak |
Αποστολή μετρήσεων στο cloud | Enviar medições para a nuvem |
Lähetä mittaukset pilveen
Sending measurements to the cloud:
Note: After setting up the cloud and the WiFi connection (see page 15).
After completing a measurement, press the WiFi button 1x. This causes the
PoolLab 2.0 to send all current data to the cloud and synchronises the app with the
®
device.
1) If you see the PoolLab 2.0
WiFi button, you are not yet connected to the WiFi. Make sure that you connect to
both the cloud and the WiFi via the LabCOM
2) Error message 401
If the SSID or password is entered incorrectly (in the LabCOM
message 401 is displayed. Please make sure that all details are entered correctly,
including upper and lower case.
Slanje mjerenja u oblak:
Napomena: Nakon postavljanja oblaka i WiFi veze (vidi stranicu 15).
Nakon završetka mjerenja, 1x pritisnite tipku WiFi. To uzrokuje da PoolLab 2.0
sve trenutne podatke u oblak i sinkronizira aplikaciju s uređajem.
1) Ako vidite PoolLab 2.0
još niste spojeni na WiFi. Provjerite jeste li se povezali i na oblak i na WiFi putem
aplikacije LabCOM
2) Poruka o pogrešci 401
Ako su SSID ili lozinka uneseni netočno (u aplikaciji LabCOM
poruka o pogrešci 401. Provjerite jesu li svi podaci ispravno uneseni, uključujući
velika i mala slova.
and a mobile phone on the screen,after pressing the
®
i mobilni telefon na ekranu, nakon pritiska na gumb WiFi,
®
.
®
27
app.
®
App), the error
®
), prikazuje se
®
šalje
®