Water I.D. LabCOM PoolLAB 2.0 Manual page 12

1) Switch on the PoolLab 2.0
2) On the PoolLab 2.0
®
bottom right twice.
Note: The Bluetooth symbol is now displayed in green in the status bar.
®
3) Start the LabCOM app.
®
4) Press the menu button (3 dashes, bottom left).
5) Press „Connect device".
A list of found devices opens. The PoolLab 2.0
6) Press the „PoolLab2" entry.
7) A new window appears in which you can make settings.
Note: For each Bluetooth connection between the LabCOM
PoolLab 2.0 , the date and time are displayed on the PoolLab 2.0
®
Note: For each Bluetooth connection between the LabCOM
PoolLab 2.0 it will also always check whether an update for the PoolLab 2.0
®
is available. If so, this update will be offered for installation.
1) Uključite PoolLab 2.0
2) Na tipkovnici PoolLab 2.0
dolje desno.
Napomena: Simbol Bluetooth
3) Pokrenite aplikaciju LabCOM
4) Pritisnite gumb izbornika (3 crtice, dolje lijevo).
5) Pritisnite „Poveži uređaj".
Otvara se popis pronađenih uređaja. PoolLab 2.0
6) Pritisnite unos „PoolLab2".
7) Pojavljuje se novi prozor u kojem možete napraviti postavke.
Napomena: Za svaku Bluetooth vezu između aplikacije LabCOM
datum i vrijeme prikazani su na PoolLab 2.0
Napomena: Za svaku Bluetooth vezu između aplikacije LabCOM
uvijek će se provjeravati je li dostupno ažuriranje za PoolLab 2.0
ažuriranje biti ponuđeno za instalaciju.
.
®
keyboard, briefly press the WiFi/Bluetooth
.
®
dvaput kratko pritisnite gumb WiFi/Bluetooth
®
sada je prikazan zelenom bojom na statusnoj traci.
®
.
®
.
®
12
button at the
®
is displayed as „PoolLab2
®
App and the
®
App and the
®
prikazuje se kao „PoolLab2".
®
i PoolLab 2.0
®
i PoolLab 2.0
®
. Ako je tako, ovo će
®
.
"
.
®
®
®
,
®
®