Advertisement
2.6 Jumper Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on the pins,
the jumper is "Short". If no jumper cap is placed on the pins, the jumper is "Open". The
illustration shows a 3-pin jumper whose pin1 and pin2 are "Short" when a jumper cap is
placed on these 2 pins.
OCP3 +12VSB Power Jump-
er (3-pin +12VSB_SEL2)
(see p.6, No. 39)
ME Recovery Jumper
(3-pin ME_RECOVERY1)
(see p.6, No. 43)
Switch SATA and PCIE
Jumper
(3-pin OCUSW_1)
(see p.6, No. 44)
CPU PECI Mode Jumper
(3-pin PECI1)
(see p.6, No. 52)
12VSB for OCP3 PWR
(Default)
Normal Mode (Default)
SATA Mode (Default)
CPU PECI connected to
PCH
SPC741D8QM3-NL
0V for OCP3 PWR
ME Recovery Mode
PCIE Mode
CPU PECI connected to
BMC (Default)
23
Advertisement
Need help?
Do you have a question about the SPC741D8QM3-NL and is the answer not in the manual?