Samsung LH025IFHSDS Series Installation Manual

Led display

Hide thumbs

page of 77

/ 77
Bookmarks

Quick Links

Download this manual

Samsung Electronics

LED Display

Installation Manual

LH025IFHSDS*/ LH025IFHTDS* (P2.5)

LH040IFH* (P4.0)

LH060IFH* (P6.0)

SBB-SNOWH3U

Ver. 1.5

Need help?

Do you have a question about the LH025IFHSDS Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Samsung LH025IFHSDS Series

Page 1 Samsung Electronics LED Display Installation Manual LH025IFHSDS*/ LH025IFHTDS* (P2.5) LH040IFH* (P4.0) LH060IFH* (P6.0) SBB-SNOWH3U Ver. 1.5...
Page 2 Table of Contents Samsung Electronics 1. Product Information and Precautions for Installation 2. Check Point about the Radiant Heat 3. Preparation for Product Installation 4. Frame Installation 5. LED Display Installation 6. S-BOX Connection 7. Settings and How to Use 8.
Page 3 1. Product Information and Precautions for Installation Samsung Electronics • Power cable and OCM cable must be inserted tightly. • Use *STP, *FTP Cable over CAT6, which length is about 15 ~ 100m for HDBT signal stability. “Do not use CAT6 UTP”...
Page 4 SURELY CONNECT the devices less than the recommended maximum number of devices. ※ No responsible for Samsung Electronics in case of exceeding the recommended maximum number of devices connection. • The label info which is attached behind product shows rated power of cabinet and rated current of...
Page 5 1. Product Information and Precautions for Installation Samsung Electronics ◇ Frame Kit Composition Refer to Page 21 Frame Kit Composition Size [mm] VG-LFH81SWD 3840 x 720 (1 row) (8 Set) VG-LFH82SWD 3840 x 1440 (2 rows) (16 Set) VG-LFH83SWD (24 Set) 3840 x 2160 (3 rows) <8x2 Frame>...
Page 6 1. Product Information and Precautions for Installation Samsung Electronics ◇ Precautions for Installation (LED damage) Precautions Image [ Beware of Outside Impact, Fall] ▶ Beware not to cause any impact on the LED screen or drop the product on MODULE the floor after the protection gets taken off for installation.
Page 7 1. Product Information and Precautions for Installation Samsung Electronics ◇ Preparations for Installation LED MODULE JIG (-) (+) Driver Electric Driver (model name: CY-LJFNAS) 10.0mm Wrench Service JIG Plier Antistatic Holder Magnet Tool (BH81-00001A) Glove...
Page 8 ※ Written under ‘Full white, (back light 7)’ standard  INDOOR Installation Condition Written under ‘Video, (back light 10)’ standard - SAMSUNG WALL MOUNT Using Condition(ADA Satisfied) ※ ADA (American’s with Disabilities Act) ∙ Product Front to Wall Gap : 90mm ∙...
Page 9 2. Check Point about the Radiant Heat Samsung Electronics ◇ Minimum gap for reclaiming installation (No fan condition, using SAMSUNG WALL MOUNT) Air vent area Min 500mm (ceiling) Min 60mm Airvent area Min 60mm Min 60mm Min 60mm Min 300mm (floor)
Page 10 2. Check Point about the Radiant Heat Samsung Electronics ◇ Minimum gap for wall installation (No fan condition, using SAMSUNG WALL MOUNT) Min 500mm (ceiling) Airvent area Airvent area Airvent area Airvent area Min 300mm (floor) Min 90mm...
Page 11 2. Check Point about the Radiant Heat Samsung Electronics ◇ Axial FAN(selection example) 95 CFM 80 CFM 65 CFM No need for FAN No need for FAN ※ Example) Total CFM? (Outdoor temperature 30℃ , Cabinet (5x5) on condition.) Total 400 CFM →...
Page 12 2. Check Point about the Radiant Heat Samsung Electronics ◇ FAN Using condition ◇ Vent specification - Air Vent : install at bottom  Using over 70% open ratio vent - Top: Seal except fan hole �� . �� ℎ��...
Page 13 2. Check Point about the Radiant Heat Samsung Electronics ◇ IFH-D P2.5 (~35℃ under) ※ SAMSUNG WALL MOUNT , Full white, back light 7, VENT 70% No need for No need for Horizontal...
Page 14 2. Check Point about the Radiant Heat Samsung Electronics ◇ IFH-D P4.0 (~25℃ under) ※ SAMSUNG WALL MOUNT , Full white, back light 7, VENT 70% No need for No need for 7~14 15~16 17~22 23~29 30~32 Horizontal...
Page 15 2. Check Point about the Radiant Heat Samsung Electronics ◇ IFH-D P4.0 (25~30℃ under) ※ SAMSUNG WALL MOUNT , Full white, back light 7, VENT 70% 230 CFM 210 CFM 190 CFM 170 CFM 150 CFM No need for No need for...
Page 16 2. Check Point about the Radiant Heat Samsung Electronics ◇ IFH-D P6.0 (~25℃ under) ※ SAMSUNG WALL MOUNT , Full white, back light 7, VENT 70% 225 CFM 215 CFM 200 CFM 190 CFM 175 CFM 165 CFM 150 CFM...
Page 17 2. Check Point about the Radiant Heat Samsung Electronics ◇ IFH-D P6.0 (25~30℃ under) ※ SAMSUNG WALL MOUNT , Full white, back light 7, VENT 70% 365 CFM 345 CFM 325 CFM 305 CFM 285 CFM 265 CFM 245 CFM...
Page 18 3. Preparation for Cabinet Installation Samsung Electronics ◇ Preparations Before Installation Top- IB & cable Cushion SLIDING SCREW suburb hole LED set handle Push Hook Bottom- Cushion Fig.4 Bolt Assembly Fig.1 Box Opening Fig. 2 Handle Fig.3 Cover Connector Removal ①...
Page 19 3. Preparation for Cabinet Installation Samsung Electronics Switch Button Screw Cushion Top Fig.5 Check the Screen Fig.7 Cabinet Storage Fig.6 Cover Corner Removal ⑤ Check whether there is any abnormality on the screen by connecting the power cable .(Fig.5) ※ Press the ‘Switch’ button for five(5) seconds after applying the electricity.
Page 20 3. Preparation for Cabinet Installation Samsung Electronics ◇ Reference : Process of Screen check Power In Switch Button Power out ◇ Connect Power Cable to SET. Use internal pattern to check dead pixel or any damage with screen ※ Internal white pattern :...
Page 21 3. Preparation for Cabinet Installation Samsung Electronics ⑧ Attach the PET Sheet and assemble Cover PCB for the Cabinet that is located at the exterior. ※ PET Sheet & Cover PCB should be at the boundary of whole screen. (Blue area at the exterior of Fig.1) ※...
Page 22 4. Frame Installation Samsung Electronics ① Frame Kit Composition VG-LFH82SWD VG-LFH83SWD VG-LFH81SWD Item Units Units Units ⓐ ASSY BRACKET SIDE ⓑ ASSY BRACKET MIDDLE ⓒ ASSY BRACKET CENTER ⓓ ASSY BRACKET JIG ⓔ ASSY SLIDING SCREW ⓕ ASSY ANCHOR SCREW M5,L65, Anchor screw ⓖ...
Page 23 4. Frame Installation Samsung Electronics ② Put the ⓐBracket Side the end of the left side and then fasten the screws to install .(Fig.2) ※ After fastening one(1) screw, use the device for vertical positioning to set up straight vertical alignment. Then fasten up the remaining holes.
Page 24 4. Frame Installation Samsung Electronics ③ Install ⓑBracket Middle. Wrong Installation(X) Correct Installation(O) ※ First, check the Hole to fix the ⓒ JIG. [Fig.1] Wall ※ Second, Mount the ⓒ JIG inside the Bracket Hole and fasten up four(4) Screws [Fig.2] ⓐ,ⓑ,ⓒ...
Page 25 4. Frame Installation Samsung Electronics ◇ When installing three or more ASSY BRACKETs, adjust their levels because they may be distorted by walls or structures. – After installing three or more ASSY BRACKETs, place another ASSY BRACKET horizontally on them and measure if there is a height difference among them.
Page 26 4. Frame Installation Samsung Electronics ⑤ After installing Bracket Center, install cabinets on the bottom line.. [Fig.6] ⑥ When the cabinet installation is finished, slide the LED modules toward the center and check the flushes between the cabinets and the LED modules at both ends.
Page 27 4. Frame Installation Samsung Electronics ◇ You can extend a Frame KIT product to any size. - The VG-LFH82SWD and VG-LFH83SWD models can be extended in both horizontal and vertical directions, for example, to construct 10 × 6, 10 × 5, or other layouts.
Page 28 4. Frame Installation Samsung Electronics ◇ Precautions for Fastening the Screws...
Page 29 5. LED Display Installation Samsung Electronics ◇ Fix I/G Location ① Install I/G first on the back side of the Cabinet of each Type (Fig.1) ※ Location to Install: Locate the I/G at the point 35~40mm below, which is the standard for carving at the right side of the frame, and then fasten the screws.(Fig.2)
Page 30 5. LED Display Installation Samsung Electronics ② Adjust the Corners of the Cabinet to each of the cravings to be closer to the Frame. ※ Order of Cabinet Installation (22 Page Fig. 1) ※ Check whether all the four(4) bolts are put into the frame. (Fig.1) ③...
Page 31 5. LED Display Installation Samsung Electronics ⑤ If modules are too tight, it could be difficult to pick out. During the installation process, select some modules and make sure they are easily picked out and reassembled.
Page 32 5. LED Display Installation Samsung Electronics ◇ Protection of I/G To prevent unexpected removing IG box, the Protection Bracket should be attached on left / right side of the display (Fig.1) * In case of pocket installation, do not need to attach the protection.
Page 33 6. S-BOX Connection Samsung Electronics ① Input the video signal to the S-BOX. (Input terminal : HDMI, DP) ② Check the signal input from SOURCE STATUS.(RED : HDMI1 , GREEN : HDMI2, Blue : DISPLAY PORT) ③ Connect from the HDBT OUT port of S-BOX to HDBT IN port of Interface Gender using LAN cable.
Page 34 6. S-BOX Connection Samsung Electronics ⑤ HDBT Cable Recommendation ★ Orderly Rolled (Recommend) Random Rolled ★ (Not Recommend)  HDBaseT Cable recommend Order Rolled Certainly, Use CAT6 (*FTP, *STP Type) Cable 15m~100m long.  Bundle cable quantity is changed according to length, kind.
Page 35 6. S-BOX Connection (Redundancy) Samsung Electronics ① If Redundant Spec should be used, Connect from DATA IN port of Interface Gender to DATA OUT port of the last cabinet by using OCM Cable. • For HDBT signal stability, use the cable above CAT6 SFTP level.
Page 36 6. S-BOX Connection (Panel Setting) Samsung Electronics ① S-Box Initial Image Setting • First S-Box Default Image Setting is optimized to LH015IFHSAS • Image Setting will be automatically changed when LED Display is connected • For optimized image setting, Please connect S-box to LSM •...
Page 37 6. S-BOX Connection (Grouping) Samsung Electronics ① Factory menu option change [1] Enter Factory menu using normal remote control ∙ Power OFF → MUTE → 1 → 8 → 2 → Power ON [2] Turn on framelock ∙ Enter [Control > LFD Option > Video Wall Settings > Frame Lock Support ] ∙...
Page 38 6. S-BOX Connection (Grouping) Samsung Electronics ② S-Box Grouping Activate Remote controller [HOME -> Video wall -> On]  [CAUTION] Before changing S-Box Grouping in LSM, Input source resolution should change to S-Box recommended resolution If input source is not supported resolution, screen noise could occur.
Page 39 6. S-BOX Connection (Grouping) Samsung Electronics ③ PC Frequency Change Method Right button → Select Image Resolution → Advanced Option Monitor Tap → Screen Frequency 60Hz...
Page 40 6. S-BOX Connection (Grouping) Samsung Electronics ④ S-box Grouping support resolution...
Page 41 6. S-BOX Connection (Grouping) Samsung Electronics ④ S-box Grouping support resolution...
Page 42 6. S-BOX Connection (Service Port) Samsung Electronics Service Port is used for check full screen, when product fail As follows, only using compatibility monitor ■ Service port monitor: LH**PMF, LH**PHF, LU28E590DS , LU24E590DS [CAUTION!] SERVICE PORT can be used service Service monitor flicker is unrelated to LED Screen ※...
Page 43 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) LSM Download Path : GSBN - SLM - Display solution download -> "LED SIGNAGE MANAGER" or "LSM“ • - GSBN : http://v3.samsunggsbn.com/ep IP Setting Tool...
Page 44 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs Network IP Setting Tool Execute : [Start] – Program – Samsung – LED Signage Manager – Network Configuration Connect PC and Sbox with RS232C Cable, select connected SerialPort(COM*). And click “open” button.
Page 45 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) Software that adjusts the LED Cabinet Layout in Remote • S-box Ethernet PC and S-box should be connected through Ethernet connection. HDBT Control PC...
Page 46 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) Start– Login Page • If the LSM gets operated for the first time, the page to set the password will appear. To set the password, users have to input the same password two times and then click the “Start”...
Page 47 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) New Connection • To add connection information, you can either use Search function or input the IP address by yourself. If you click on the Search button, the IP addresses available on S-BOX in the same network will appear.
Page 48 7. Settings and How to Use Samsung Electronics [★ Cautions!] Recommend to use static IP address for the LED devices. If DHCP is used, IP address is changed automatically and LSM can be 7-1 Control Program for PCs disconnected. The 192.168.10.x band is used for internal communication of the LED Cabinet.
Page 49 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs [★ Cautions!] LSM(LED Signage Manager) The network port 1515 and 48485 are used for internal communication between S-BOX and LED Cabinet. It should be include the firewall or network exception if customer used secured network.
Page 50 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) Main Window-Home Window • Input source: Input source, resolution, connection time of S-BOX are shown. Cabinet Layout : Layout, number of units, number of connections and number of disconnections in all LED cabinets are shown.
Page 51 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) Main Window-Edit Connection Layout Window • Connection layout: The location and the layout of each LED cabinet are adjusted in the output source area of the S-BOX.
Page 52 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) Main Window-Connection Window • Device connection list view: Check S-BOX composition, modify and delete S-BOX connection, show by each LED Cabinet Group Connection layout (View Port):...
Page 53 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) Main Window-Connection Window - Device Information/Setting View • 1. Basic : . Power On/Off, Change input source, Screen Mute / Freeze 2. Picture . Change Picture Mode, Brightness / Contrast...
Page 54 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) System - System Restart Interval (Cont’d.) • - For product stability, S-Box reboot every week. - Default setting : 4:00am ~ 5:00am, Monday - To change rebooting time, Use System Restart Interval of LSM...
Page 55 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) System - System Restart Interval • - If reboot function is unnecessary, go to factory menu and off the weekly boot : Factory – Control – LFD Option – Weekly Reboot : ON → OFF...
Page 56 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) Main Window-Connection Window - Device Information/Setting View • 6. Cabinet Settings . ABL, Gamut, Backlight . Software Update function (FPGA, Calibration data, etc.) 7. Cabinet Calibration .
Page 57 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) Main Window-Connection Window - Sub Information View • Monitor Window: Checking MDC communication log and connected device information available, able to be extracted via file...
Page 58 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) Main Window-Preference • Options number of times the command retried interval of checking error status alarm temperature warnings Support program language Log data management...
Page 59 7. Settings and How to Use Samsung Electronics 7-1 Control Program for PCs LSM(LED Signage Manager) Remote Update • S/box Update Features : Main FW, Sub-Micom, FPGA, Valens Cabinet Update Features : Main FW, FPGA, Calibration Data Note : After finishing update procedure, need to check the version →...
Page 60 8. Issue and Solution Samsung Electronics ◇ Problem Case 1 Rule 1: The 1 Cabinet from I/G board must be ID #2 for the LSM Setup Rule 2: The 1 Cabinet from I/G board must be set as Master. The 2 Master cabinet is not allowed for the LSM connection.
Page 61 8. Issue and Solution Samsung Electronics ◇ Problem Case 1 Rule 1: The 1 Cabinet from I/G board must be ID #2 for the LSM Setup Rule 2: The 1 Cabinet from I/G board must be set as Master. The 2 Master cabinet is not allowed for the LSM connection.
Page 62 8. Issue and Solution Samsung Electronics ◇ How to do Factory Reset After checking cable connection order, the cabinet which is not display the proper picture position will be Wrong positioned Master cabinet. In this case, Do factory reset to change to slave cabinet .
Page 63 SURELY CONNECT the devices less than the recommended maximum number of devices. ※ No responsible for Samsung Electronics in case of exceeding the recommended maximum number of devices connection. • The label info which is attached behind product shows rated power of cabinet and rated current of...
Page 64 9. Cable/Power Connection Samsung Electronics 9-2. The caution for Cabinet installation and Cable connection(Full Front) 1) The set installation order Must be Left -> Right direction. Because The structure of Wall mount hole for cabinet installation is downward diagonal direction.
Page 65 9. Cable/Power Connection Samsung Electronics 9-3 The direction for Cabinet installation 1) Installation of First row cabinet starts at the bottom of Left-end. 2) After installing cabinets one line is complete, make sure the connection is OK by connecting OCM/Power cable. Then, Install next line.
Page 66 9. Cable Connection Samsung Electronics 9-4. Cable Connection : Data flow standard ◎ Connect OCM cable Forward direction Reverse Reverse Forward Forward P4.0 (1200X1080) P2.5 (1920X1440) P6.0 (800X600)
Page 67 10. Seam Adjustment Samsung Electronics ◇ Check and Adjust Seam ① Check whether there is any Black Line between the cabinets in White Screen. (Fig.1) ② Check whether gap, differences occur between each module . (Fig.2) ※ Gap: appears as a black line in every direction.
Page 68 10. Seam Adjustment Samsung Electronics ◇ Module Disassembly/Assembly Separate the JIG and module at the same time. Have the Unlock mark head upwards. Place to LED module. Put the replaced module Have the Lock mark head upwards. Lock after placing on LED module.
Page 69 Samsung Electronics Aluminum profile & Frame Kit Installation Manual Ver. 0.1...
Page 70 Contents Samsung Electronics 1. Profile Info & Installation Guide 2. Installation of Aluminum profile 3. Installation of Frame Kit 4. Note about slope and ceiling installation...
Page 71 ◇ Aluminum profile & Frame Kit • Aluminum profile specification composition Standard 30x60 Al profile Standard 30x30 Al profile LED DISPLAY cabinet Samsung Frame Kit Standard Aluminum profile • Accessories for Aluminum profile assembly • Installation example M6*L10 Screw Standard 30x60 gusset...
Page 72 2. Installation of Aluminum profile Samsung Electronics ◇ Aluminum profile • Bolster Aluminum profile installation 1. When Aluminum profile needs enhancement in its strength, add more Aluminum profile as the picture below. 90° 90° 2. All added Al profile material should not block air-vent nor cable connector.
Page 73 3. Installation of Frame kit Samsung Electronics ◇ Prepare Frame Kit 1. Disassemble holder screws for the needed area of Frame Kit. ( Relevant Frame : Holders in the side & Holders in the Middle/Center ) * When using Al profile, do not use holder.
Page 74 3. Installation of Frame kit Samsung Electronics ◇ Assemble Aluminum profile into Frame Kit 14.0mm ① ② ③ ④ ⑤ ⑥ ⑦ 1. Assemble ASSY BRACKET SIDE starting from the left. (Assembly order : Left→Right) 2. For the locking, use M6 screw and nut to fix it onto Al profile.
Page 75 4. Note about slope and ceiling installation Samsung Electronics ◇ Please contact the development team with special installation specification.
Page 76 - Appendix ※ HDbaseT Certificated Cable Samsung Electronics 업체 모델명 업체 모델명 HNCPRO(TM) HOME NETWORK CABLE Trends Electronics Cat 5E/SHLD-BLU PROFESSIONAL Cat 5e/350 Mhz HNCPRO(TM) HOME NETWORK CABLE Cat 6 STP PROFESSIONAL PLUS Cat 6/550mhz Be;dem West Penn Wire 4246F...
Page 77 - Appendix ※ HDbaseT Certificated Cable Samsung Electronics 업체 모델명 업체 모델명 Kramer Electronics BC-HDKat6a Snap AV SP-CAT6A-1000-BLU BC-UNIKat CAT. 5E HDC-CABLE (SF/UTP) Nien-Yi Industrial Corp. NY-CAT.5E-UTP NY-CAT.6-UTP Hitachi Cable America Category 7 HDBaseT Panduit PUP6AM04 – Cat. 6A, Advanced MaTriX, U/UTP cable, Plenum (CMP) Rated PFP6X04 –...

This manual is also suitable for:

Lh025ifhtds series Lh040ifh series Lh060ifh series Sbb-snowh3u