Product Overview; Call Handling - Answer/End Button - Plantronics IP40 Administration Manual

2 Product Overview

The IP40 has three buttons for agent audio control

2.1 Call Handling - Answer/End Button

The Answer/End button on the IP40 headset adapter is configurable and can be used
for different functions during normal operation: answering a call, disconnecting a call,
and placing a call to one pre-configured destination.
Figure 1 IP40 Top View
In addition, the Answer/End button is also used to find out local administrative
information of individual IP40s. This information is accessed by pushing the
Answer/End button when not in a call to hear any of the following - IP address of the
adapter (described in section 3.3); - spoken error prompts (described section 10). In
conjunction with the Volume Up button the Answer/End button is used to initiate a
factory reset (described in section 2.7).
Handling Incoming Calls
The IP40 headset adapter can be configured to automatically answer incoming calls
5/29/2009 Plantronics IP40 Administration Guide
Volume Up
Answer/End
Volume Down
Mute
Power Light
Page 7