Configuration Update - Plantronics IP40 Administration Manual

Web Page: Management Settings
Label on web page: Polling Method
Parameter name: FWU_POLLING_MODE
Type: enumeration
Default Value: 0 (Absolute)
Notes: Checks either at a specific time (Absolute = 0) or by a period / frequency
(Relative = 1)
Web Page: Management Settings
Label on web page: Frequency for searching for new software
Parameter name: FWU_POLLING_PERIOD
Type: integer (0 to 65535)
Default Value: 86400 seconds (= one day)
Notes: Defines the frequency (period in seconds) of checks for new firmware in Relative
mode.
Web Page: Management Settings
Label on web page: Hour for searching for new software
Parameter name: FWU_POLLING_TIME_HH
Type: integer (0 to 23)
Default Value: 3 (= 03:xx am)
Notes: Defines the hour when a check for new firmware would occur in Absolute mode.
Web Page: Management Settings
Label on web page: Minute for searching for new software
Parameter name: FWU_POLLING_TIME_MM
Type: integer (0 to 59)
Default Value: 0 (= xx:00)
Notes: Defines the minute when a check for new firmware would occur in Absolute
mode.

6.4.4 Configuration Update

Web Page: Management Settings
Label on web page: Configuration Update
Parameter name: CFG_POLLING_ENABLE
Type: Boolean
Default Value: 1 (Enabled)
Notes: Turns on overall polling process for new configuration
Web Page: Management Settings
Label on web page: Polling Method
Parameter name: CFG_POLLING_MODE
Type: enumeration
5/29/2009 Plantronics IP40 Administration Guide Page 32