Typical Minimal Configuration; Configuration Example; Via Configuration File Upload - Plantronics IP40 Administration Manual

4 Typical Minimal Configuration

4.1 Configuration example

The following example configuration configures the IP40 headset adapter to register
against the Address of Record "sip:4081@plantronics.com" with the password
"12341234" by sending to a proxy server at 10.1.3.32 on port 5060. It uses the display
name "4081" and will call "831 458 5858" (Plantronics central number) when the
Answer/End button is pressed. The adapter gets the current time from the SNTP server
"bigben.example.com" and is in Time Zone +1 (Midway Island).
What the SIP parameters mean
The right-hand-side of the @ sign (the domain portion) of an Address of Record (AOR)
contains the domain or server responsible for that AOR, and typically it is where SIP
requests should be sent for that AOR. This value is called the "Domain" on the Voice
Server page (SRV_0_SIP_UA_DATA_DOMAIN in configuration file). This value is
mandatory.
The left-hand-side of the @ sign (the user portion) contains the name of the resource or
user at the domain or server name in the right-hand-side. In other words,
sip:bill@bigcompany.com is a different resource than sip:bill@smallcompany.com. This
value is called the "SIP user name" on the Voice Subscription page
(SUBSCR_0_UA_DATA_SIP_NAME). This value is also mandatory.
In some cases the domain name, hostname, or IP address provided for the registrar is
not the hostname or IP address where the IP40 should send its SIP requests. If this is
the case, the "Proxy Address" on the Voice Server page
(SRV_0_SIP_UA_DATA_PROXY_ADDR) should be set to the address where requests
need to be sent. This value is optional. If the value is blank, the IP40 headset adapter
will send its SIP requests to the server identified by SRV_0_SIP_UA_DATA_DOMAIN.

4.1.1 Via configuration file upload

%SRV_0_SIP_UA_DATA_DOMAIN%:"plantronics.com"
%SRV_0_SIP_UA_DATA_PROXY_ADDR%:"10.1.3.32"
%SRV_0_SIP_UA_DATA_SERVER_PORT%:5060
%NETWORK_SNTP_SERVER%:"bigben.example.com"
%GMT_TIME_ZONE%:+1
%SUBSCR_0_UA_DATA_SIP_NAME%:"4081"
%SUBSCR_0_UA_DATA_DISP_NAME%:"4081"
%SUBSCR_0_UA_DATA_AUTH_NAME%:"4081"
%SUBSCR_0_UA_DATA_AUTH_PASS%:"12341234"
%AUTO_DIAL_NUMBER%:"918314585858"
5/29/2009 Plantronics IP40 Administration Guide Page 17