Management Server - Plantronics IP40 Administration Manual

6.4.1 Management Server

Web Page: Management Settings
Label on web page: Configuration server address
Parameter name: NETWORK_TFTP_SERVER
Type: IP address or domain name (up to 60 chars)
Default Value:""
Notes: This is the domain name or IP address of the HTTP or TFTP configuration server
used to fetch configuration updates (if different from the firmware server address)
Web Page: Management Settings
Label on web page: Firmware server address
Parameter name: NETWORK_FWU_SERVER
Type: IP address or domain name (up to 60 chars)
Default Value: "firmware.plantronics.com"
Notes: This is the domain name or IP address of the HTTP or TFTP server used to fetch
both configuration and firmware updates.
Web Page: Management Settings
Label on web page: Firmware path
Parameter name: FWU_TFTP_SERVER_PATH
Type: string
Default Value: "/media/downloads/ip40poe/"
Notes: This directory in which the IP40 headset adapter will look for new software on the
HTTP or TFTP management server.
Web Page: Management Settings
Label on web page: Management Password
Parameter name: MANAGEMENT_PASSWORD
Type: string (up to 25 chars)
Default Value: "VoipLan"
Web Page: Management Settings
Label on web page: Management Upload Script
Parameter name: MANAGEMENT_UPLOAD_SCRIPT
Type: string (up to 20 chars)
Default Value: "/Config"
The name of the management server can be configured, it can be discovered using
DNS SRV lookups, or it can be discovered using DHCP options. Customers who want to
use a DHCP provided management server can use a two-stage configuration process.
The IP40 is turned on first on a private network where it use DNS SRV to find a
configuration server, and downloads a very minimal configuration file that enables
DHCP-based configuration. The DHCP option approach just provides an IP address.
5/29/2009 Plantronics IP40 Administration Guide Page 30