Default Setting File Contents - Plantronics IP40 Administration Manual

Type: Boolean
Default Value: 1
Notes: Definition of the trace mode, i.e. what bus to use. Currently the following
possibilities exist:
0: UART internal
1: Ethernet
Parameter name: LOCAL_HTTP_SERVER_TEMPLATE_TITLE
Type: string
Default Value: "IP40 configurator"
Notes: String that appears on the top of the IP40 web interface to describe the unit
being viewed
Parameter name: CONFIGURATION_FILE_FLAG
Type: Boolean
Default Value: 0
Notes: Flag to control update of configuration file
Factory default sets CONFIGURATION_FILE_FLAG to 1 in order to avoid download of
configuration file during production test only.

6.9.3 Default Setting file contents

%PLAY_INBAND_DTMF%:1
%FWU_POLLING_ENABLE%:1
%FWU_POLLING_MODE%:0
%FWU_POLLING_PERIOD%:86400
%FWU_POLLING_TIME_HH%:3
%FWU_POLLING_TIME_MM%:0
%GMT_TIME_ZONE%:15
%AUTO_DIAL_NUMBER%:""
%CFG_POLLING_ENABLE%:1
%CFG_POLLING_MODE%:0
%CFG_POLLING_PERIOD%:86400
%CFG_POLLING_TIME_HH%:3
%CFG_POLLING_TIME_MM%:0
%CALL_AUTO_ANSWER%:0
%DISCONNECT_BUTTON%:1
%MicGain%:22
%ENABLE_EXTRA_RX_GAIN%:0
%NETWORK_DHCP_CLIENT_TIMEOUT%:3
%NETWORK_DHCP_CLIENT_BOOT_SERVER%:2
%NETWORK_DHCP_CLIENT_BOOT_SERVER_OPTION%:160
%NETWORK_DHCP_CLIENT_BOOT_SERVER_OPTION_DATATYPE%:1
5/29/2009 Plantronics IP40 Administration Guide Page 45