Table of Contents
Advertisement
The protocol to use is still selected using whatever protocol is selected in
MANAGEMENT_TRANSFER_PROTOCOL, and the default port number for that
protocol is selected.
Web Page: Management Settings
Label on web page: Management Transfer Protocol
Parameter name: MANAGEMENT_TRANSFER_PROTOCOL
Type: enumeration
Default Value: 1 (HTTP)
Notes: The protocol used to fetch both configuration and firmware updates. 0 = TFTP; 1
= HTTP (strongly recommended)
6.4.2 Upload of Debug Information
Web Page: Management Server
Label on web page: Upload Server
Parameter name: NETWORK_UPLOAD_SERVER
Type: string
Default Value: ""
Notes: Server to upload debug information
Web Page: Management Server
Label on web page: Upload of Debug Log
Parameter name: VOIP_LOG_AUTO_UPLOAD
Type: Boolean
Default Value: 0
Notes: Setting to upload debug information, 0=Disable, 1=Boot Log only, All information
Web Page: Management Server
Label on web page: Upload of SIP Log
Parameter name: VOIP_SIP_AUTO_UPLOAD
Type: Boolean
Default Value: 0
Notes: Setting to upload debug information, 0=Disable, All information
6.4.3 Firmware Update
Web Page: Management Settings
Label on web page: Firmware Update
Parameter name: FWU_POLLING_ENABLE
Type: Boolean
Default Value: 1 (Enabled)
Notes: Turns on overall polling process for new firmware
5/29/2009
Plantronics IP40 Administration Guide
Page 31
Advertisement
Table of Contents
