OPT7 Runner Series Installation Manual

Led 3rd brake light

Download this manual

DISCLAIMER

OPT7 Lighting is not liable for damages or personal injuries

while installing this product. The Installation Guide is

intended as assistance to reduce setup time. OPT7 Lighting

assumes no responsibility for improper installation.

If you are unfamiliar with your vehicle or inexperienced with

aftermarket upgrades, please seek professional assistance.

NEED HELP?

Access our Knowledge Base

by scanning the QR code, or

visit www.opt-7.com/support

Instagram

@opt7lighting

Subcribe to our

YouTube

channel.

Opt7Lighting

INSTALLATION

MANUAL

v1.0.03.29.19

Need help?

Do you have a question about the Runner Series and is the answer not in the manual?

Page 1 DISCLAIMER OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
Page 2 INSTALLATION Remove the brake light. Seat the new brake light housing into it’s In a typical case, appropriate slot. remove 2 fasteners and pull rearward on the brake light housing to release it from the body of the vehicle. Disconnect the Install the 2 fasteners electrical plug from the that were removed...