Dell POWERVAULT MD3600F Owner's Manual page 35

Item Component
9 Management
port Ethernet
connector
10 Management
port speed LED
11 Password reset
switch
12 Battery fault
13 FCIN port 3
LED 1 / LED 0
14 Cache active or
cache offload
LED
15 FCIN port 2
LED 1 / LED 0
16 System
identification
LED
17 Controller fault
LED
18 FCIN port 1
LED 1 / LED 0
19 Controller power
LED
Function
Provides a 100/1000 Mbps Ethernet connection for out-of-
band management of the enclosure.
Lights green when Ethernet connection is operating at
1000 Mbps.
Lights amber when Ethernet connection is operating at
100 Mbps.
Off when Ethernet connection is operating at 10 Mbps or is
not active.
Activating this switch resets the password.
Lights amber when battery backup unit or battery
has failed.
Off when battery backup unit is operating normally.
Displays link rate and port status per the accompanying
host channel LED link/rate table.
Lights green when on-board controller memory
contains data.
If AC power fails, this LED changes to indicate Cache
Offload status.
If the password reset function has successfully changed the
password, this LED flashes on and off briefly.
Displays link rate and port status per the accompanying
host channel LED link/rate table.
Blinks blue when system identification switch push-button
on enclosure front panel is pressed.
Lights amber when controller fault detected.
Off when controller operating normally.
Displays link rate and port status per the accompanying
host channel LED link/rate table.
Lights green when controller power is on.
Off when controller is not powered.
Planning: RAID Controller Modules
35