Dell POWERVAULT MD3600F Owner's Manual page 206

• Changing the segment size of a virtual disk
• Defragmenting a disk group
• Adding free capacity to a disk group
• Changing the RAID level of a disk group
To change the synchronization priority and method for an existing remote
replication:
1 In the AMW of the storage array containing the primary virtual disk of the
replicated pair, right-click the Logical tab.
2 Select ChangeSynchronization Settings.
The Change Synchronization Settings dialog is displayed.
3 In the Replicated pairs table, select the primary virtual disk and the remote
virtual disk you want to change. To select all virtual disks, click Select All.
4 On the Select Synchronization Priority slide bar, select the
synchronization priority for the replicated pair.
5 Select either Manual or Automatic resynchronization.
• Automatic —Resynchronization starts immediately after
communication is restored between unsynchronized replicated
virtual disks.
• Manual—The replicated pair must be manually resynchronized each
time communication is restored between unsynchronized replicated
virtual disks.
6 Click OK.
The Change Synchronization Settings confirmation message is displayed.
7 In the Change Synchronization Settings confirmation message, click Yes.
The Change Synchronization Priority - Progress bar displays the progress of
the resynchronization.
8 Click OK.
206
Configuration: Premium Feature— Remote Replication