Deactivating The Remote Replication On The Storage Array - Dell POWERVAULT MD3600F Owner's Manual

To remove remote replication from a storage array:
1 In the AMW of the storage array containing the primary virtual disk, select
the Logical tab.
2 In the Logical pane, right-click the primary virtual disk of a replicated pair,
then select Remove Replication Relationship.
The Remove Replication Relationship dialog is displayed. The Replicated
pairs table shows all replicated pairs in both the local and remote storage array.
3 To remove a replication relationship, select one or more replicated pairs.
To select all replicated pairs, click Select All.
4 Click Remove.
The Remove Replication Relationship - Confirmation message is displayed.
5 Click Yes.
The Remove Replicated Pair - Progress bar shows the progress of the
removal process.

Deactivating the Remote Replication on the Storage Array

Before you can permanently disable the Remote Replication premium feature
you must deactivate it on the storage array, see "Disabling the Remote
Replication Premium Feature" on page 217. Deactivating the Remote
Replication premium feature on this storage array does not affect remote
virtual disk replications or the Remote Replication premium features on other
storage arrays. However, another storage array cannot use this storage array as
a remote storage array for creating a separate remote virtual disk replication.
To deactivate remote replication in a storage array:
1 In the Array Management Window, select Storage ArrayRemote
ReplicationDeactivate.
The Deactivate Remote Replication confirmation message is displayed.
2 Click Yes.
The Remote Replication premium feature is deactivated and the two
replication repository virtual disks are deleted from the storage array.
216
Configuration: Premium Feature— Remote Replication