Planning: Md3600F Series Storage; Array Terms And Concepts; Physical Disks, Virtual Disks, And Disk Groups - Dell POWERVAULT MD3600F Owner's Manual

Storage arrays
Hide thumbs Also See for POWERVAULT MD3600F:
Table of Contents

Advertisement

4

Planning: MD3600f Series Storage

Array Terms and Concepts

This chapter explains terms and concepts used for configuration and
operation of MD3600f Series storage arrays.

Physical Disks, Virtual Disks, and Disk Groups

Physical disks in your storage array provide the physical storage capacity for
your data. Before you can begin writing data to the storage array, you must
configure the physical storage capacity into logical components, called disk
groups and virtual disks.
A disk group is a set of physical disks upon which multiple virtual disks are
created. The maximum number of physical disks supported in a disk group is
120 disks (or 192 disks with Premium Feature activation) for RAID 0, RAID 1,
and RAID 10, and 30 drives for RAID 5 and RAID 6. You can create disk
groups from unconfigured capacity on your storage array.
A virtual disk is a partition in a disk group that is made up of contiguous data
segments of the physical disks in the disk group. A virtual disk consists of data
segments from all physical disks in the disk group. Virtual disks and disk
groups are set up according to how you plan to organize your data. For
example, you may have one virtual disk for inventory, a second virtual disk for
financial and tax information, and so on.
All virtual disks in a disk group support the same RAID level. The storage
array supports up to 255 virtual disks (minimum size of 10 MB each) that can
be assigned to host servers. Each virtual disk is assigned a Logical Unit
Number (LUN) that is recognized by the host operating system.
41
Planning: MD3600f Series Storage Array Terms and Concepts

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powervault md3620f

Table of Contents