C H A N G I N G T H E TA I L L I G H T
BULBS
Carefully read page 50 (BULBS).
The tail light accommodates:
– A parking light/stoplight bulb (1).
– One number plate bulb (2).
To change the bulbs:
Loosen the screws (3).
u
Remove the lens (4).
u
52
use and maintenance Scarabeo 125 - Scarabeo 250
PARKING LIGHT/STOPLIGHT BULB
Push down the bulb (1) gently and twist
u
anticlockwise.
Extract the bulb from its seat.
u
CAUTION
Insert the bulb into
the bulb holder, so that the two pins slide
into the slots in the holder.
Fit a new bulb of equal rating.
u
NUMBER PLATE BULB
Remove the bulb (2) and fit a new bulb of
u
equal rating.
CAUTION
Make sure that the
lens locates correctly into its seat on
refitting.
CAUTION
Tighten the screw (3) moderately and
carefully, to avoid damaging the lens.