PARKING LIGHT BULB
To extract the bulb socket, do not pull its
electric wires.
Grasp the bulb socket, pull and disconnect it from
◆
its seat.
Withdraw the parking light bulb (9) and replace it
◆
with one of the same type.
CHANGING THE REAR LIGHT BULBS
(Fig. 77)
Proceed as follows:
Unscrew the two screws (1);
◆
Remove the glass (2);
◆
Press the bulb (3) slightly and rotate it anticlock-
◆
wise;
Remove the bulb from its seat.
◆
The introduction of a new bulb can be
carried out in one sense only, since the
two guide pins are misaligned.
Install a new bulb correctly, then repeat the above
◆
operations in the reverse order for the reassem-
bly.
7
8
2
6
Fig. 76
Fig. 77
9
3
73