21
1
55
22
KM/H
MODE
M/H
MODE
MODE
Fig. 26
START-UP SETTING
Metric system setting (KM/H or MPH)
Keep the three push buttons simultaneously pres-
◆
sed for about 2 seconds, then press any of them
to start settings.
Press left push button to change the unit of mea-
◆
surement from ≈km∆ to ≈mi∆ (KM/H to MPH) or
vice-versa.
Keep centre ≈MODE∆ push button pressed for
◆
about 1.5 seconds to confirm. Then start wheel
diameter ≈WS∆ setting.
As soon as the MODE push button is
pressed, the actual wheel diameter value
and the first flashing datum will appear on the left
display.