APRILIA RX 50 RACING - 2003 Manual page 59

Table of Contents

Advertisement

CHAIN ADJUSTMENT (Fig. 60)
Stand the vehicle in an upright position and com-
pletely extend the rear suspension.
Check that the vertical movement in the lower part
of the chain, at a point mid-way between the pin-
ion and the crown, is about 30-35 mm.
If this distance is not correct, proceed as follows:
Loosen the rear wheel pin fastening nut.
For the wheel centering:
Make sure that on both sides the fixed
reference on the rear fork corresponds
to the number indicated on the chain tightener.
Act on the apposite chain tighteners.
Once the operation has been performed, tighten
the rear wheel pin fastening nut.
30 - 35
Fig. 60
59

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx 50 racing

Table of Contents