APRILIA RX 50 RACING - 2003 Manual page 72

7 8 2
6
8
72
9
Fig. 74
7
Fig. 75
CHANGING THE HEADLIGHT BULBS
(Fig. 74)
To change the low and high beam bulbs, proceed
as follows:
To extract the bulb electric connector, do
not pull its electric wires.
Grasp the bulb electric connector (6), pull it and di-
◆
sconnect it from the bulb (2).
Withdraw the protection element (7) from the re-
◆
flector and from the bulb terminals.
Rotate the bulb socket (8) anticlockwise and ex-
◆
tract it from the reflector.
Extract the bulb (2).
◆
For the installation:
Insert the bulb (2) in the reflector, making
the two teeth provided on the bulb coincide
with the relevant guide on the reflector.
Position the bulb socket (8) in the reflector and ro-
◆
tate it clockwise.
Correctly insert the protection element (7) in the
◆
bulb terminals and in the reflector.
Connect the bulb electric connector (6).
◆