Changing The Rear Light Bulb - APRILIA RS 125 - 2006 Manual

1
CHANGING
THE REAR LIGHT BULB
Carefully read page 69 (BULBS).
Before changing a bulb, check
t h e f u s e s , s e e
(CHANGING THE FUSES) and the
effective operation of the stoplight
switches, see page 68 (CHECKING THE
SWITCHES).
2
u
Position the vehicle on the stand.
H
u
Remove the rider seat, see page 56
(REMOVING THE RIDER SADDLE) .
H
u
Remove the panel to gain access to
the tool kit compartment.
H
u
Unscrew and remove the two screws
(1).
p a g e 6 7
H
u
Remove the passenger seat sliding it
off under the passenger grab strap.
N O T E : U p o n r e a s s e m b l y , f i t t h e
passenger seat keys in their housings.
u
Turn the bulb holder (2) anticlockwise
and remove it.
u
Press the bulb (3) slightly and rotate it
anticlockwise.
u
Extract the bulb from its seat.
I n s e r t t h e b u l b i n t h e b u l b
socket, making the two bulb pins
coincide with the relevant guides on the
socket.
u
Correctly install a new bulb of the same
type.
u
Refit bulb holder (2) in its housing and
turn it clockwise until it locks in place.
use and maintenance RS 125
3
71