Chapter 4 Wizard Setup
Table 16 VPN Express Wizard: Step 3 (continued)
LABEL
Remote
Policy (IP/
Mask)
Back
Next
4.8.1 VPN Express Wizard - Policy Setting
The Policy Setting specifies which devices can use the VPN tunnel. Local and
remote IP addresses must be static.
Local Policy (IP/Mask): Type the IP address of a computer on your network.
You can also specify a subnet. This must match the remote IP address configured
on the peer IPSec device.
Remote Policy (IP/Mask): Type the IP address of a computer behind the peer
IPSec device. You can also specify a subnet. This must match the local IP address
configured on the peer IPSec device.
Figure 42 VPN Express Wizard: Step 4
88
DESCRIPTION
If Any displays in this field, it is not configurable for the chosen scenario.
If this field is configurable, type a static local IP address that corresponds
to the remote IPSec router's configured local IP address (the local IP
address of the other ZyWALL).
To specify IP addresses on a network by their subnet mask, type the
subnet mask of the LAN behind the remote gateway.
Click Back to return to the previous screen.
Click Next to continue.
ZyWALL USG 2000 User's Guide