Adding A Radius Server Member - ZyXEL Communications ZYWALL USG 2000 Manual

Chapter 40 AAA Server
Table 206 Object > AAA Server > RADIUS > Group (continued)
LABEL
Group Name
Add icon

40.5.1 Adding a RADIUS Server Member

Click Object > AAA Server > RADIUS > Group to display the RADIUS >
Group screen. Click the Add icon or an Edit icon to display the configuration
fields.
Figure 433 Object > AAA Server > RADIUS > Group > Add
The following table describes the labels in this screen.
Table 207 Object > AAA Server > RADIUS > Group > Add
LABEL
General
Settings
Name
Key
Timeout
656
DESCRIPTION
This field displays the descriptive name for identification purposes.
Click Add to add a new entry.
Click Edit to edit the settings of an entry.
Click Delete to remove an entry.
DESCRIPTION
All RADIUS servers in a group share the same settings in the fields
below.
Enter a descriptive name (up to 63 alphanumeric characters) for
identification purposes.
Enter a password (up to 15 alphanumeric characters) as the key to be
shared between the external authentication server and the ZyWALL.
The key is not sent over the network. This key must be the same on the
external authentication server and the ZyWALL.
Specify the timeout period (between 1 and 300 seconds) before the
ZyWALL disconnects from the RADIUS server. In this case, user
authentication fails.
Search timeout occurs when either the user information is not in the
RADIUS server or the RADIUS server is down.
ZyWALL USG 2000 User's Guide