The Application Patrol Policy Edit Screen - ZyXEL Communications ZYWALL USG 2000 Manual

Table 130 Application Edit (continued)
LABEL
Log
Add icon
OK
Cancel

28.3.2 The Application Patrol Policy Edit Screen

The Application Policy Edit screen allows you to edit a group of settings for an
application. To access this screen, go to the application patrol Common, Instant
Messenger, Peer to Peer, VoIP, or Streaming screen and click an application's
Edit icon. Then click the Add icon or an Edit icon in the Policy table. The screen
displayed here is for the MSN instant messenger service.
Figure 331 Application Policy Edit
ZyWALL USG 2000 User's Guide
DESCRIPTION
This field shows whether the ZyWALL generates a log (log), a log and
alert (log alert) or neither (no) when the application's traffic matches
this policy.
Click the Add icon in the heading row to add a new first entry.
The Active icon displays whether the entry is enabled or not. Click the
Active icon to activate or deactivate the entry. Make sure you click
Apply to save and apply the change.
Click the Edit icon to go to the screen where you can edit the entry.
Click the Add icon in an entry to add a new entry below the current
entry.
Click the Remove icon to delete an existing entry from the ZyWALL. A
window displays asking you to confirm that you want to delete the entry.
To move an entry up or down in the list, click on the Move to N icon
next to the entry, and type the line number (# field) of where you want
to move the entry. The # field is updated accordingly. The ordering of
the entries is important as they are applied in order of their numbering.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
Chapter 28 Application Patrol
459