ZyXEL Communications ZYWALL USG 2000 Manual page 779

To access this screen, login to the web configurator. When the main screen
appears, click Maintenance > Report > Session Monitor. The following screen
appears.
Figure 514 Maintenance > Report > Session Monitor
The following table describes the labels in this screen.
Table 253 Maintenance > Report > Session Monitor
LABEL
View
Refresh
User
Service
Source
Address
Destination
Address
ZyWALL USG 2000 User's Guide
DESCRIPTION
Select how you want the information to be displayed. Choices are:
sessions by users - display all active sessions grouped by user
sessions by services - display all active sessions grouped by service or
protocol
sessions by source IP - display all active sessions grouped by source
IP address
sessions by destination IP - display all active sessions grouped by
destination IP address
all sessions - filter the active sessions by the User, Service, Source
Address, and Destination Address, and display each session
individually (sorted by user).
Click this button to update the information on the screen. The screen
also refreshes automatically when you open and close the screen.
The User, Service, Source Address, and Destination Address fields
display if you view all sessions. Select your desired filter criteria and click
the Search button to filter the list of sessions.
This field displays when View is set to all sessions. Type the user
whose sessions you want to view. It is not possible to type part of the
user name or use wildcards in this field; you must enter the whole user
name.
This field displays when View is set to all sessions. Select the service
or service group whose sessions you want to view. The ZyWALL identifies
the service by comparing the protocol and destination port of each
packet to the protocol and port of each services that is defined. (See
Appendix B on page 871
This field displays when View is set to all sessions. Type the source IP
address whose sessions you want to view. You cannot include the source
port.
This field displays when View is set to all sessions. Type the
destination IP address whose sessions you want to view. You cannot
include the destination port.
for more information about services.)
Chapter 48 Reports
779