Step 2 Internet Access Ethernet - ZyXEL Communications ZYWALL USG 2000 Manual

Chapter 4 Wizard Setup
Table 8 Ethernet Encapsulation: Static (continued)
LABEL
IP Address
IP Subnet
Mask
Gateway IP
Address
First DNS
Server
Second DNS
Server
Next
The ZyWALL applies the configuration settings.

4.3.3 Step 2 Internet Access Ethernet

You do not configure this screen if you selected Auto as the IP Address
Assignment in the previous screen.
Note: Enter the Internet access information exactly as given to you by your ISP.
WAN Interface: This is the number of the interface that will connect with your
ISP.
Zone: This is the security zone to which this interface and Internet connection will
belong.
IP Address: Enter your (static) public IP address.
IP Subnet Mask: Enter the subnet mask for this WAN connection's IP address.
Gateway IP Address: Enter the IP address of the router through which this WAN
connection will send traffic (the default gateway).
DNS Server: The Domain Name System (DNS) maps a domain name to an IP
address and vice versa. Enter a DNS server's IP address(es). The ZyWALL uses
64
DESCRIPTION
Enter the IP address that your ISP gave you. This should be a static,
public IP address.
Enter the subnet mask for the IP address.
Enter the IP address of the router through which this WAN connection
will send traffic (the default gateway).
DNS (Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa. The DNS server is extremely
important because without it, you must know the IP address of a
computer before you can access it. The ZyWALL uses a system DNS
server (in the order you specify here) to resolve domain names for VPN,
DDNS and the time server.
Enter the DNS server IP addresses.
Click Next to continue.
ZyWALL USG 2000 User's Guide