ZyXEL Communications ZYWALL USG 2000 Manual page 622

Chapter 36 User/Group
Table 187 Object > User/Group > Setting (continued)
LABEL
Allow renewing
lease time
automatically
Enable user idle
detection
User idle
timeout
User Logon
Settings
Limit ... for
administration
account
Maximum
number per
administration
account
Limit ... for
access account
Maximum
number per
access account
User Lockout
Settings
Enable logon
retry limit
Maximum retry
count
Lockout period
622
DESCRIPTION
Select this check box if access users can renew lease time
automatically, as well as manually, simply by checking the
Updating lease time automatically check box on their screen.
This is applicable for access users.
Select this check box if you want the ZyWALL to monitor how long
each access user is logged in and idle (in other words, there is no
traffic for this access user). The ZyWALL automatically logs out the
access user once the User idle timeout has been reached.
This is applicable for access users.
This field is effective when Enable user idle detection is checked.
Type the number of minutes each access user can be logged in and
idle before the ZyWALL automatically logs out the access user.
Select this check box if you want to set a limit on the number of
simultaneous logins by admin users. If you do not select this, admin
users can login as many times as they want at the same time using
the same or different IP addresses.
This field is effective when Limit ... for administration account is
checked. Type the maximum number of simultaneous logins by each
admin user.
Select this check box if you want to set a limit on the number of
simultaneous logins by non-admin users. If you do not select this,
access users can login as many times as they want as long as they
use different IP addresses.
This field is effective when Limit ... for access account is checked.
Type the maximum number of simultaneous logins by each access
user.
Select this check box to set a limit on the number of times each user
can login unsuccessfully (for example, wrong password) before the
IP address is locked out for a specified amount of time.
This field is effective when Enable logon retry limit is checked.
Type the maximum number of times each user can login
unsuccessfully before the IP address is locked out for the specified
lockout period. The number must be between 1 and 99.
This field is effective when Enable logon retry limit is checked.
Type the number of minutes the user must wait to try to login again,
if logon retry limit is enabled and the maximum retry count is
reached. This number must be between 1 and 65,535 (about 45.5
days).
ZyWALL USG 2000 User's Guide