Table 209 System Maintenance Menu Syslog Parameters - ZyXEL Communications ZYWALL 2 PLUS User Manual

Chapter 39 System Information & Diagnosis
You need to configure the syslog parameters described in the following table to activate syslog
then choose what you want to log.

Table 209 System Maintenance Menu Syslog Parameters

FIELD
Syslog:
Active
Syslog Server IP
Address
Log Facility
When finished configuring this screen, press [ENTER] to confirm or [ESC] to cancel.
Your ZyWALL sends five types of syslog messages. Some examples (not all ZyWALL
specific) of these syslog messages with their message formats are shown next:
1 CDR
CDR Message Format
SdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );
String = board xx line xx channel xx, call xx, str
board = the hardware board ID
line = the WAN ID in a board
Channel = channel ID within the WAN
call = the call reference number which starts from 1 and increments by 1 for each new call
str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)
Jul 19 11:19:27 192.168.102.2 ZyXEL: board 0 line 0 channel 0, call 1, C01 Outgoing Call dev=2
ch=0 40002
Jul 19 11:19:32 192.168.102.2 ZyXEL: board 0 line 0 channel 0, call 1, C02 OutCall Connected
64000 40002
Jul 19 11:20:06 192.168.102.2 ZyXEL: board 0 line 0 channel 0, call 1, C02 Call Terminated
542
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to turn syslog on or off.
Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
Press [SPACE BAR] and then [ENTER] to select a location. The log facility allows
you to log the messages to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
L02 Tunnel Connected(L2TP)
C02 OutCall Connected xxxx (means connected speed) xxxxx (means Remote Call Number)
L02 Call Terminated
C02 Call Terminated
ZyWALL 2 Plus User's Guide