Figure 300 Menu 3.2: Tcp/Ip And Dhcp Ethernet Setup; Table 183 Menu 3.2: Dhcp Ethernet Setup Fields - ZyXEL Communications ZYWALL 2 PLUS User Manual

Internet security appliance

Hide thumbs Also See for ZYWALL 2 PLUS:

Table of Contents

Figure 300 Menu 3.2: TCP/IP and DHCP Ethernet Setup

DHCP= Server

Client IP Pool:

Starting Address= 192.168.1.33

Size of Client IP Pool= 128

First DNS Server= From ISP

IP Address= N/A

Second DNS Server= From ISP

IP Address= N/A

Third DNS Server= From ISP

IP Address= N/A

DHCP Server Address= N/A

Follow the instructions in the next table on how to configure the DHCP fields.

Client IP Pool:

Starting Address

Size of Client IP

ZyWALL 2 Plus User's Guide

Menu 3.2 - TCP/IP and DHCP Ethernet Setup

Press ENTER to Confirm or ESC to Cancel:

This field enables or disables the DHCP server.

If set to Server, your ZyWALL will act as a DHCP server.

If set to None, the DHCP server will be disabled.

If set to Relay, the ZyWALL acts as a surrogate DHCP server and relays requests

and responses between the remote server and the clients.

When set to Server, the following items need to be set:

This field specifies the first of the contiguous addresses in the IP address pool.

This field specifies the size, or count of the IP address pool.

Chapter 29 LAN Setup

TCP/IP Setup:

IP Address= 192.168.1.1

IP Subnet Mask= 255.255.255.0

RIP Direction= Both

Version= RIP-1

Multicast= None

Edit IP Alias= No