Radius; Figure 198 Security > Auth Server > Radius; Table 90 Security > Auth Server > Radius - ZyXEL Communications ZYWALL 2 PLUS User Manual

Chapter 16 Authentication Server

16.3 RADIUS

Click SECURITY > AUTH SERVER > RADIUS to open the RADIUS screen. Configure
this screen to use an external RADIUS server to authenticate users.
Figure 198 SECURITY > AUTH SERVER > RADIUS
The following table describes the labels in this screen.
Table 90 SECURITY > AUTH SERVER > RADIUS
LABEL
Authentication Server
Active
Server IP Address
Port Number
Key
Accounting Server
Active
Server IP Address
Port Number
304
DESCRIPTION
Select the check box to enable user authentication through an external
authentication server.
Clear the check box to enable user authentication using the local user profile
on the ZyWALL.
Enter the IP address of the external authentication server in dotted decimal
notation.
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs
you to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the ZyWALL.
The key is not sent over the network. This key must be the same on the
external authentication server and ZyWALL.
Select the check box to enable user accounting through an external
authentication server.
Enter the IP address of the external accounting server in dotted decimal
notation.
The default port of the RADIUS server for accounting is 1813.
You need not change this value unless your network administrator instructs
you to do so with additional information.
ZyWALL 2 Plus User's Guide