Figure 261 Logs > Reports: Protocol/Port Example; Table 135 Logs > Reports: Protocol/ Port - ZyXEL Communications ZYWALL 2 PLUS User Manual

Figure 261 LOGS > Reports: Protocol/Port Example
The following table describes the labels in this screen.
Table 135 LOGS > Reports: Protocol/ Port
LABEL
Protocol/Port
Direction
Amount
ZyWALL 2 Plus User's Guide
DESCRIPTION
This column lists the protocols or service ports for which the most traffic has gone
through the ZyWALL. The protocols or service ports are listed in descending order with
the most used protocol or service port listed first.
This field displays Incoming to denote traffic that is coming in from the WAN to the
LAN, DMZ or WLAN. This field displays Outgoing to denote traffic that is going out
from the LAN, DMZ or WLAN to the WAN.
This column lists how much traffic has been sent and/or received for each protocol or
service port. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) varies
with the amount of traffic for the particular protocol or service port. The count starts
over at 0 if a protocol or port passes the bytes count limit (see
Chapter 24 Logs Screens
Table 136 on page 406).
405