How To Manage The Zywall's Bandwidth; Figure 69 Tutorial Example: Nat Address Mapping Done: Game Playing - ZyXEL Communications ZYWALL 2 PLUS User Manual

Chapter 4 Tutorial
In this example, you have four static IP addresses (1.2.3.4 to 1.2.3.7) from your ISP. After you
set up your WAN connection (see
Mapping screen to map the third and forth public IP addresses to the mail server
(192.168.1.12) and web server (192.168.1.13) respectively. The first and second public IP
addresses are mapped to other outgoing LAN traffic. See
information about IP address mapping.
When you finish configuration, the screen looks as shown.

Figure 69 Tutorial Example: NAT Address Mapping Done: Game Playing

Note: To allow traffic from the WAN to be forwarded through the ZyXEL Device, you
must also create a firewall rule. Refer to
information.

4.4 How to Manage the ZyWALL's Bandwidth

This section shows you examples of how to allocate bandwidth and apply priorities to traffic
that flows out through the ZyWALL's WAN port.
110
Section 4.2.2 on page 94), use the NAT > Address
Section 4.2.3 on page 97
Section 4.2.5 on page 103
for more
for more
ZyWALL 2 Plus User's Guide