Rem Node Name= ?
Active= Yes
Outgoing:
Figure 24-10 Menu 11.1 Remote Node Profile (Backup ISP)
Use menu 11.5 to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote
node and the Prestige to prevent certain packets from triggering calls. You can specify up to four filter sets
separated by commas, for example, 1, 5, 9, 12, in each filter field. Note that spaces are accepted in this
field. Please refer to the Filters chapter for more information on defining the filters.
Figure 24-11 Menu 11.5 Dial Backup Remote Node Filter
Menu 2 WAN Backup Setup
Menu 11.1 - Remote Node Profile (Backup ISP)
My Login=
My Password= ********
Authen= CHAP/PAP
Pri Phone #= ?
Sec Phone #=
Press ENTER to Confirm or ESC to Cancel:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL:
Prestige 652 Series User's Guide
Edit PPP Options= No
Rem IP Addr= ?
Edit IP= No
Edit Script Options= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= Yes
Idle Timeout(sec)= 100
24-15