Figure 13-6 Timeout; Table 13-5 Timeout - ZyXEL Communications PRESTIGE 652H User Manual

13.8.1 Factors Influencing Choices for Timeout Values
The factors influencing choices for timeout values are the same as the factors influencing choices for
threshold values – see section 12.3.2. Click Timeout for either Local Network or Internet.
The following table describes the fields in this screen.
LABEL
TCP Timeout Values
Connection Timeout
FIN-Wait Timeout
Idle Timeout
UDP Idle Timeout
ICMP Timeout
Creating Custom Rules

Figure 13-6 Timeout

Table 13-5 Timeout

Type the number of seconds (default 30) for the Prestige to wait for a TCP
session to reach the established state before dropping the session.
Type the number of seconds (default 60) for a TCP session to remain open
after the firewall detects a FIN-exchange (indicating the end of the TCP
session).
Type the number of seconds (default 3600) for an inactive TCP connection to
remain open before the Prestige considers the connection closed.
Type the number of seconds (default 60) for an inactive UDP connection to
remain open before the Prestige considers the connection closed.
Type the number of seconds (default 60) for an ICMP session to wait for the
ICMP response.
Prestige 652 Series User's Guide
DESCRIPTION
13-13