Encrypt Button Behavior - ZyXEL Communications PLA4225 User Manual

If the HomePlug (
devices are not connected. Repeat the connection process, making certain you press the
ENCRYPT buttons for the correct time and within two minutes of each other. If that does not
work see Section 6.5 on page 51 for suggestions.

3.4 ENCRYPT Button Behavior

The following table summarizes the actions that occur when the ENCRYPT button is pressed for
specific lengths of time.
Table 2 Time ENCRYPT Button is Pressed and Action
TIME
less than 3
seconds
more than
10 seconds
See Troubleshooting in
button and the lights.
PLA4225 User's Guide
) lights on both powerline devices do not light up, the powerline
ACTION
The device joins a network. It
shares the same network name
as other devices on the
network.
The device leaves any network
it is associated with and its
network name assumes a
random value.
Chapter 6 on page 51
POWER LIGHT BEHAVIOR
The power ( ) light blinks
until the device is connected.
This may take a minute.
The power ( ) light blinks
several times and then shines
steadily.
for suggestions on problems with the ENCRYPT
Chapter 3 The ENCRYPT Button
HOMEPLUG LIGHT
BEHAVIOR
The HomePlug ( ) light turns
on if your device is connected
to another powerline device or
a powerline network.
The HomePlug ( ) light blinks
red one time and then turns off
when it disconnects from the
powerline network.
25