Power And Light Problems - ZyXEL Communications PLA4225 User Manual

Chapter 6 LEDs and Troubleshooting
The following table describes the behavior of the lights on the PLA4225.
Table 8 PLA4225
LIGHTS
POWER
HomePlug
ETHERNET

6.2 Power and Light Problems

The PLA4225 does not turn on. None of the lights turn on.
Make sure you are using the power cord included with the PLA4225.
1
Make sure the power cord is connected to the PLA4225 and plugged in to an appropriate power
2
source. Make sure the power source is turned on.
48
ICON COLOR STATUS
Green On
Blinking
Off
Green On
Amber
Red
Green/ Blinking
Amber/
Red
Off
1~4 Green On
Blinking
Off
DESCRIPTION
The PLA4225 is on and receiving power.
It also indicates a successful connection using the
ENCRYPT button.
The PLA4225 is starting up.
It also indicates the PLA4225 is trying to connect with
another device using the ENCRYPT function.
Blinking at the same time as the HomePlug light
indicates an unsuccessful connection if you have used
the ENCRYPT button.
The Power LED blinks when it is in Low Power mode.
Refer to Section 2.3 on page 16
feature.
The PLA4225 is not receiving power.
The PLA4225 detects another powerline adapter. The
data transfer rate is greater than 80 Mbps.
The PLA4225 detects another powerline adapter. The
data transfer rate is between 40~80 Mbps.
The PLA4225 detects another powerline adapter. The
data transfer rate is between 0~40 Mbps.
The PLA4225 is communicating with another powerline
adapter. Data is being transmitted and/or received.
Blinking at the same time as the POWER light indicates
an unsuccessful connection if you have used the
ENCRYPT button.
The HomePlug port does not detect another powerline
adapter.
The ETHERNET port is on and ready and the PLA4225
detects a device connected to it.
The PLA4225 is communicating with a networking
device connected to it.
The PLA4225 does not detect any devices connected to
its ETHERNET port.
for details on this
PLA4225 User's Guide