ZyXEL Communications PLA4225 User Manual page 24

Chapter 3 The ENCRYPT Button
For example, you have already set up a powerline network in your home (A) which accesses a
printer (B). Now you want a separate powerline network connection from your laptop to your
printer (C).
Figure 9 One Existing Powerline Network
A
B
Click the ENCRYPT button on (A) for more than 10 seconds until the power (
1
disconnects (A) from (B).
Click the ENCRYPT button on (A) and (C) for 1~2 seconds and within two minutes of each other.
2
Wait for about one minute while (A) and (C) connect.
3
Check the LEDs on both (A) and (C). When the power (
4
and the power (
Figure 10 Two Separate Powerline Networks
Congratulations. You now have two separate powerline networks as shown above.
24
) light shines steadily, the devices are connected.
A
C
C
) and HomePlug (
B
) light flashes. This
) lights stop blinking
PLA4225 User's Guide