CP Plus CP-UNC-VC41L5C-VMDS-V2 Quick Start Manual page 9

Step 3 Click Search setting. The setting interface is displayed.
Step 4 Enter the start IP and end IP of the network segment in which you want to search devices, and then click
OK. All the devices found in the network segment are listed.
Step 5 Select one or several devices which Status are Uninitialized, and then click Initialize. The Device
initialization interface is displayed.
Step 6 Select the devices that need initialization, and then click initialize. The password setting interface is
displayed. See Figure 2-2.
Step 7 Set and confirm the password of the devices, and then enter a valid email address. Click Next. The
final setting interface is displayed.
Password can be modified or reset in System Settings.
Step 8 Select the options according to your needs and then click OK.
The Initialization interface is displayed after initializing is completed. Click the success icon (
failure icon
( ) for the details.
Step 9 Click Finish.
The device status in the Modify IP interface (Figure 2-1) turns to Initialized.
Figure 2-2 Password setting interface
) or the